User Manual.pdf

FCC ID: KA2SPW110B1

Users Manual

Download: PDF
FCCID_2693198

Version DRAFT | 04/29/2014 User Manual mydlink™ Wi-Fi Smart Plug DSP-W110

Section 1 - Product Overview Hardware Overview LEDs and Buttons 2 3 4 1 5 WPS Press for one second to start the WPS connection process. The Status LED will start to blink. 1 WPS/Reset Button Reset Press and hold for 10 seconds to reset the device back to the factory default settings. 2 ON/OFF Button Press to turn the device ON or OFF. Solid Green The device is successfully connected to your network. Blinking Green During the WPS process. 3 Status LED Blinking Orange The device is attempting to communicate with your wireless network. Solid Red During power on/boot process or device is defective. Solid Green The device is powered on. 4 Power LED will not power on, try another outlet. 5 Plug Connect your appliances, lamps, and other devices to monitor. D-Link DSP-W110 User Manual 2

Section 2 - Installation and Setup Installation and Setup Smart Plug. Step 1 Download the app from the App Store (iOS) or Google Play (Android). Step 2 Once installed, launch the app. Step 3 Next to continue. D-Link DSP-W110 User Manual 3

Section 2 - Installation and Setup Step 4 When the Status LED is blinking orange, press Next. Step 5 If your router supports WPS, press the WPS button on your router. Press Next to continue. Please refer to your router’s documentation if you are unsure if your router supports WPS. If your router does not support WPS or you want to manually connect to your wireless router, press Manual Setup and skip to Step 6 - Manual on page 11. D-Link DSP-W110 User Manual 4

Section 2 - Installation and Setup Step 6 - WPS Press the WPS button on your Smart Plug. The Status LED will start to blink green. Allow up to two minutes to connect to your router. Press Next to continue. Note: You must press the WPS button on your router and the Smart Plug within two minutes. Step 7 - WPS After about two minutes, the Status LED will turn solid green. This indicates that the Smart Plug has successfully connected to your wireless router. Press Next to continue. D-Link DSP-W110 User Manual 5

Section 2 - Installation and Setup Step 6 - Manual You must connect to the Smart Plug directly. Do not close this app. On your device, go to Settings > Wi-Fi. Select the network called DSP- xxxx or DSP-xxxx_AC. Note: xxxx represents numbers and/or letters that are unique to your Smart Plug device. For the exact network name (SSID), refer to the Quick Install card that came with the product. Press Next to continue. Step 7 - Manual Enter the PIN code and press Connect. This code is located both on the front of the Smart Plug and the Quick Install card. D-Link DSP-W110 User Manual 6

Section 2 - Installation and Setup Step 8 - Manual A list of available wireless networks will appear. Press your wireless network (the SSID of your wireless router). Step 9 - Manual If you have secured your wireless network, enter your Wi-Fi password and click Join. Continue with step 10 on the next page. D-Link DSP-W110 User Manual 7

Section 2 - Installation and Setup Step 10 Once you connect, you will need to connect to your mobile device or tablet (that you are currently running the app from) to your wireless router (if you are not already). Make sure you keep this app running. On your device, go to Settings > Wi-Fi. Connect to your wireless router and enter your Wi-Fi password (if you have one). Go back to this app and press Next to continue. Step 11 Your device will now scan your network for Smart Plugs. D-Link DSP-W110 User Manual 8

Section 2 - Installation and Setup Step 12 If you have received this error message, please do the following: a. Please make sure your mobile device is connected to your router. b. Make sure the Power LED and Status LEDs on your Smart Plug are both solid green. c. Press Hardware Settings and verify the settings. d. Press Discovery Again to rescan. Step 13 Enter a nickname for your Smart Plug. Click Change your Icons to change the icon for your device or click Done in the upper right corner D-Link DSP-W110 User Manual 9

Section 2 - Installation and Setup Step 14 Select an icon that represents the device plugged into your Smart Plug and then press Use in the upper right corner. If you do not want to change the icon, press Cancel. Step 15 Your settings will now save. D-Link DSP-W110 User Manual 10

Standards LEDs t*&&&O tPPwer t*&&&H t4tBtus Support Functions t4NBrt rFNPte cPOtrPM t'CC t6- tPPwFSTDIFEVMJOH Dimensions tYYNN Security Weight t WPA t5#% t WP" t 814(WJFJPrPtected 4etup) Temperature t0QFSBUJOHtP °C Humidity t0QFSBUJPOtPOPOcPOEFOTJOH t4tPrBHFtPOPOcPOEFOTJOH Power Input t*OQVU t Power Consumption tMBYJNVN W FYDMVEJOH"$PVUQVUPG4PDLFU0VUMFU  * D-Link DSP-W110 User Manual 11

FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IC Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.


Document Created: 2015-07-24 12:01:58
Document Modified: 2015-07-24 12:01:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC