RF Exposure Info (MPE)

FCC ID: KA2IRX6060A1

RF Exposure Info

Download: PDF
FCCID_4287399

RF Exposure Report Report No.: SA181022E01 FCC ID: KA2IRX6060A1 Test Model: DIR-X6060 Received Date: Oct. 22, 2018 Test Date: Mar. 05 to 16, 2019 Issued Date: May 08, 2019 Applicant: D-Link Corporation Address: No.289, Xinhu 3rd Rd., Neihu District, Tapei City 11494, Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA181022E01 Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 181022E01

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA181022E01 Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 181022E01

Release Control Record Issue No. Description Date Issued SA181022E01 Original release. May 08, 2019 Report No.: SA181022E01 Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 181022E01

1 Certificate of Conformity Product: AX6000 Wi-Fi 6 Router Brand: D-Link Test Model: DIR-X6060 Sample Status: ENGINEERING SAMPLE Applicant: D-Link Corporation Test Date: Mar. 05 to 16, 2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: May 08, 2019 Phoenix Huang / Specialist Approved by : , Date: May 08, 2019 May Chen / Manager Report No.: SA181022E01 Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 181022E01

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f2)* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 30cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain WLAN Frequency Range Directional Antenna Gain Antenna Type Connector Type (GHz) (dBi) 2.4~2.4835 6.628229 Dipole R-SMA 5.15~5.85 7.698165 Bluetooth Frequency Range Antenna Net Gain Antenna Type Connector Type (GHz) (dBi) 2.4~2.4835 2.97 Printed NA Note: More detailed information, please refer to operating description. Report No.: SA181022E01 Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 181022E01

2.5 Calculation Result of Maximum Conducted Power Evaluation Operation Max Power Antenna Gain Distance Power Density Limit Frequency Mode (mW) (dBi) (cm) (mW/cm2) (mW/cm2) (MHz) WLAN 2.4GHz 2462 941.67 6.63 30 0.38322 1 WLAN 5240 653.582 7.70 30 0.34029 1 (U-NII-1) WLAN 5270 240.802 7.70 30 0.12537 1 (U-NII-2A) WLAN 5610 248.712 7.70 30 0.12949 1 (U-NII-2C) WLAN 5755 965.86 7.70 30 0.50288 1 (U-NII-3) BT-EDR 2441 7.096 2.97 30 0.00124 1 BT-LE 2440 2.825 2.97 30 0.00049 1 Note: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2. The Max. Power = Max. tune up power including tolerance. Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density Maximum power per technology was chosen for simultaneous transmission mode, detailed mode as below: WLAN 2.4GHz (802.11b / CH11) + WLAN 5GHz (802.11ax (HE40) / CH151) + Bluetooth (BT-EDR_GHSK / CH39) = 0.38322 / 1 + 0.50288 / 1 + 0.00124 / 1 = 0.88734 Therefore the maximum calculations of above situations are less than the “1” limit. --- END --- Report No.: SA181022E01 Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: 181022E01


Document Created: 2019-06-03 19:29:34
Document Modified: 2019-06-03 19:29:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC