RF Exposure Info.pdf

FCC ID: KA2IR816LA1

RF Exposure Info

Download: PDF
FCCID_2066053

                                     RF EXPOSURE REPORT


                                         REPORT NO.: SA130822E12
                                           MODEL NO.: DIR-816L
                                                     FCC ID: KA2IR816LA1
                                             RECEIVED: Aug. 22, 2013
                                                  TESTED: Aug. 22, 2013
                                                   ISSUED: Sep. 05, 2013


                                           APPLICANT: D-Link Corporation

                                              ADDRESS: No.289, Sinhu 3rd Rd., Neihu District,
                                                       Taipei City 114, Taiwan, R.O.C



                                             ISSUED BY: Bureau Veritas Consumer Products Services
                                                        (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory

                                     LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen,
                                                  Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan,
                                                  R.O.C.



  This report should not be used by the client to claim
  product certification, approval, or endorsement by any
  government agencies.




This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is
permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set
forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or
identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the
information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our
negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue
within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the
report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or
non-compliance to the specification



 Report No.: SA130822E12                                                     1 of 6                                   Report Format Version 5.0.0
 Reference No.:


                                   TABLE OF CONTENTS
RELEASE CONTROL RECORD ..................................................................................... 3
1. CERTIFICATION ...................................................................................................... 4
2. RF EXPOSURE LIMIT.............................................................................................. 5
3. MPE CALCULATION FORMULA ............................................................................. 5
4. CLASSIFICATION .................................................................................................... 5
5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 6




Report No.: SA130822E12                                   2 of 6                         Report Format Version 5.0.0
Reference No.:


                            RELEASE CONTROL RECORD

 ISSUE NO.                REASON FOR CHANGE                   DATE ISSUED
 SA130822E12              Original release                    Sep. 05, 2013




Report No.: SA130822E12                       3 of 6   Report Format Version 5.0.0
Reference No.:


1. CERTIFICATION

                 PRODUCT:     Wireless AC750 Dual Band Cloud Router

          BRAND NAME:         D-Link

             MODEL NO.:       DIR-816L

         TEST SAMPLE:         ENGINEERING SAMPLE

             APPLICANT:       D-Link Corporation

         TESTED DATE:         Aug. 22, 2013

           STANDARDS:         FCC Part 2 (Section 2.1091)

                              FCC OET Bulletin 65, Supplement C (01-01)

                              IEEE C95.1


The above equipment (Model: DIR-816L) has been tested by Bureau Veritas
Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance
with the requirement of the above standards. The test record, data evaluation &
Equipment Under Test (EUT) configurations represented herein are true and accurate
accounts of the measurements of the sample’s EMC characteristics under the
conditions specified in this report.




 PREPARED BY              :                                ,   DATE: Aug. 09, 2013
                              ( Lori Chung, Specialist )


 APPROVED BY              :                                ,   DATE: Aug. 09, 2013
                              ( May Chen, Manager )




Report No.: SA130822E12                          4 of 6              Report Format Version 5.0.0
Reference No.:


2. RF EXPOSURE LIMIT

LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)
   FREQUENCY              ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY        AVERAGE TIME
   RANGE (MHz)            STRENGTH (V/m) STRENGTH (A/m)   (mW/cm2)             (minutes)
                 LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE
      300-1500                 …              …            F/1500                     30
   1500-100,000                …              …              1.0                      30

F = Frequency in MHz


3. MPE CALCULATION FORMULA
Pd = (Pout*G) / (4*pi*r2)
where
Pd = power density in mW/cm2
Pout = output power to antenna in mW
G = gain of antenna in linear scale
pi = 3.1416
r = distance between observation point and center of the radiator in cm


4. CLASSIFICATION
The antenna of this product, under normal use condition, is at least 20cm away from the
body of the user. So, this device is classified as Mobile Device.




Report No.: SA130822E12                       5 of 6                Report Format Version 5.0.0
Reference No.:


5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER


15.247(2.4GHz):
                                    ANTENNA                    POWER
 FREQUENCY          MAX POWER                      DISTANCE                        LIMIT
                                      GAIN                     DENSITY
    (MHz)              (mW)                           (cm)                       (mW/cm2)
                                      (dBi)                   (mW/ cm2)
   2412-2462              893.330     3.93             20      0.35460                 1


15.247(5GHz):
                                    ANTENNA                    POWER
 FREQUENCY          MAX POWER                      DISTANCE                        LIMIT
                                      GAIN                     DENSITY
    (MHz)              (mW)                           (cm)                       (mW/cm2)
                                      (dBi)                   (mW/ cm2)
  5745 ~ 5825             381.944     3.67             20      0.17690                 1


15.407(5GHz):
                                    ANTENNA                    POWER
 FREQUENCY          MAX POWER                      DISTANCE                        LIMIT
                                      GAIN                     DENSITY
    (MHz)              (mW)                           (cm)                       (mW/cm2)
                                      (dBi)                   (mW/ cm2)
  5180 ~ 5240             48.865      2.67             20      0.02263                 1




CONCLUSION:
Both of the 2.4GHz and 5GHz WLAN can transmit simultaneously, the formula of
calculated the MPE is:


CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1
CPD = Calculation power density
LPD = Limit of power density


Therefore, the worst-case situation is 0.35460 / 1 + 0.17690 / 1= 0.532, which is less
than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit.



 --- END ---




Report No.: SA130822E12                       6 of 6              Report Format Version 5.0.0
Reference No.:



Document Created: 2013-09-09 10:35:53
Document Modified: 2013-09-09 10:35:53

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC