Tune Up

FCC ID: KA2IR513AA1

Parts List/Tune Up Info

Download: PDF

FCCID_2434296

Maximum Target power of WLAN/ BT

TX Power Setting

- Each product is programmed with the pre-defined RF parameters
- Each product RF power level is measured to ensure the power level not exceeding the target power
level, in a fully calibrated setup.
- The user has no possibility to change these settings later on

Please find below the Maximum Transmit Power for production units:

IEEE 802.11 Average Power (dBm)

Band / Frequency (MHz) Ant 0 Ant 1 Ant 0+1

11b 11g HT20 HT40 11b 11g HT20 HT40 11b 11g HT20 HT40

2412 12.5 15 13 12.5 14.5 13 15.5 18 16.5

2422 8 11.5 14.5

2.4GHz Band 2437 12.5 16.5 16.5 15 12.5 15.5 16.5 14.5 15.5 20 21 18

2452 10.5 11.5 14.5

2462 12.5 15 13 12.5 14.5 13 15.5 18 16.5

Power unit: dBm

The maximum output power, after for manufacturing tolerances, in production units will not exceed the
value listed in the table above. Production units are all within (+0 , -3 dB) of this value.

Document Created: 2019-11-14 18:05:07
Document Modified: 2019-11-14 18:05:07

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC