TestRpt - Co-Tranmission

FCC ID: KA2IR4121

Test Report

Download: PDF
FCCID_1198717

CO-TRANSMISSION SUPPLEMENTARY TEST REPORT REPORT NO.: RF980930H02-1 MODEL NO.: DIR-412 RECEIVED: Sep. 30, 2009 TESTED: Oct. 07 to 12, 2009 ISSUED: Nov. 10, 2009 APPLICANT: D-Link Co. ADDRESS: No.289, Shinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 24 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF980930H02-1 1 Report Format Version 3.0.0

Table of Contents 1 CERTIFICATION ........................................................................................... 3 2 SUMMARY OF TEST RESULTS ................................................................... 4 2.1 MEASUREMENT UNCERTAINTY ...........................................................................4 3 GENERAL INFORMATION............................................................................ 5 3.1 GENERAL DESCRIPTION OF EUT ........................................................................5 3.2 DESCRIPTION OF TEST MODES ..........................................................................7 3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL: ...........................8 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ..........................................9 3.5 DESCRIPTION OF SUPPORT UNITS...................................................................10 3.6 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 11 4 TEST TYPES AND RESULTS ..................................................................... 12 4.1 CONDUCTED EMISSION MEASUREMENT .........................................................12 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................ 12 4.1.2 TEST INSTRUMENTS................................................................................. 12 4.1.3 TEST PROCEDURES ................................................................................. 13 4.1.4 DEVIATION FROM TEST STANDARD........................................................ 13 4.1.5 TEST SETUP .............................................................................................. 13 4.1.6 EUT OPERATING CONDITIONS ................................................................ 14 4.1.7 TEST RESULTS .......................................................................................... 15 4.2 RADIATED EMISSION MEASUREMENT ..............................................................17 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT ................................. 17 4.2.2 TEST INSTRUMENTS................................................................................. 18 4.2.3 TEST PROCEDURES ................................................................................. 19 4.2.4 TEST SETUP .............................................................................................. 20 4.2.5 EUT OPERATING CONDITIONS ................................................................ 20 4.2.6 TEST RESULTS .......................................................................................... 21 4.2.7 TEST RESULTS .......................................................................................... 22 5 INFORMATION ON THE TESTING LABORATORIES ................................ 23 6 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ...................................................... 24 Report No.: RF980930H02-1 2 Report Format Version 3.0.0

1 CERTIFICATION PRODUCT : Mobile Wireless Router BRAND NAME : D-Link MODEL NO. : DIR-412 TESTED : Oct. 07 to 12, 2009 APPLICANT : D-Link Co. TEST SAMPLE : MASS-RODUCTION STANDARDS : 47 CFR Part 15, Subpart C (Section 15.247) ANSI C63.4-2003 The above equipment (Model: DIR-412) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Nov. 10, 2009 ( Claire Kuan, Specialist ) TECHNICAL ACCEPTANCE : , DATE: Nov. 10, 2009 ( Hank Chung, Deputy Manager ) APPROVED BY : , DATE: Nov. 10, 2009 ( May Chen, Deputy Manager ) Report No.: RF980930H02-1 3 Report Format Version 3.0.0

2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: 47 CFR Part 15, Subpart C Standard Test Type and Limit Result REMARK Section Meet the requirement of limit. Minimum passing 15.207 AC Power Conducted Emission PASS margin is -16.46dB at 19.709MHz Meet the requirement of Transmitter Radiated Emissions limit Minimum passing 15.247(d) PASS Limit: Table 15.209 margin is -1.94 dB at 2390.00 MHz 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Value Conducted emissions 2.44 dB Radiated emissions (30MHz-1GHz) 3.94 dB Radiated emissions (1GHz -18GHz) 2.49 dB Radiated emissions (18GHz -40GHz) 2.70 dB Report No.: RF980930H02-1 4 Report Format Version 3.0.0

3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Mobile Wireless Router MODEL NO. DIR-412 FCC ID KA2IR4121 POWER SUPPLY 5VDC CCK, DQPSK, DBPSK for DSSS MODULATION TYPE 64QAM, 16QAM, QPSK, BPSK for OFDM MODULATION TECHNOLOGY DSSS, OFDM 802.11b:11/5.5/2/1Mbps 802.11g: 54/48/36/24/18/12/9/6Mbps HT20 MCS0~7 (800NS GI): 6.5Mbps, 13Mbps, 19.5Mbps, 26Mbps, 39Mbps, 52Mbps, 58.5Mbps, 65Mbps HT40 MCS0~7 (800NS GI): 13.5Mbps, 27Mbps, TRANSFER RATE 40.5Mbps, 54Mbps, 81Mbps, 108Mbps, 121.5Mbps, 135Mbps HT20 MCS0~7 (400NS GI): 7.2Mbps, 14.4Mbps, 21.7Mbps, 28.9Mbps, 43.3Mbps, 57.8Mbps, 65.0Mbps, 72.2Mbps HT40 MCS0~7 (400NS GI): 15.0Mbps, 30.0Mbps, 45.0Mbps, 60.0Mbps, 90.0Mbps, 120.0Mbps, 135.0Mbps, 150.0Mbps FREQUENCY RANGE 2412MHz ~ 2462MHz 11 for 802.11b, 802.11g, draft 802.11n (20MHz) NUMBER OF CHANNEL 7 for draft 802.11n (40MHz) 802.11b: 221.820mW 802.11g: 375.837mW MAXIMUM OUTPUT POWER 802.11n (20MHz): 349.140mW 802.11n (40MHz): 318.420mW ANTENNA TYPE Please see note 1 ANTENNA CONNECTOR MHF connector DATA CABLE Ethernet cable (Unshielded, 1.5m) x 1 I/O PORT USB port for 1XEV-DO x 1, Ethernet Port x 1 ASSOCIATED DEVICES Adapter x1 Report No.: RF980930H02-1 5 Report Format Version 3.0.0

NOTE: 1. There is one antenna provided to this EUT, please refer to the following table: Cable Loss Net Gain Antenna No. Brand No. Model No. Gain (dBi) Connector (dB) (dB) Type WHA YU C037-511023- PCB 1 2.9 0.27 2.63 MHF GROUP A (NP-9072) antenna 2. The EUT must be supplied with a power adapter and as following: Brand: D-Link Model No.: CF1505-B Input power : AC100-120V, 04A, 50-60Hz DC 5V, 2.5A Output power : DC output cable (Unshielded, 1.5m) 3. The EUT’s appearance has two different colors , which are identical to each other in all aspects except for the following information: No. Color Difference 1 Black For marking requirement 2 White 4. The EUT could be applied with one 3G Card and following three different models could be chosen; therefore emission tests are added for simultaneously transmit between wireless LAN and 3G function. The emission tests have been performed at the worst channel of both WLAN and 3G, and recorded in other report. <only for test, not for sale> Item Brand name Model name FCC ID 1 HUAWEI E220 FCC ID: QISE220 2 HUAWEI E169 FCC ID: QISE169 3 HUAWEI E180 FCC ID: QISE180 The EUT was pre-tested in chamber with above 3G Cards, the worst case was found in model: E180. Therefore only the test data of the mode was recorded in this report. 5. The EUT incorporates a SISO function with 802.11b, 802.11g, draft 802.11n. Physically, the EUT provides one completed transmitter and receivers. 6. The EUT is 1 * 1 spatial SISO without beam forming function. The antenna configuration is one transmitter antenna and one receiver antenna, as there is 1 PCB antenna. There is one transmitter and one receiver. 7. The EUT complies with draft 802.11n standards and backwards compatible with 802.11b, 802.11g products. 8. The EUT operates in the 2.4GHz frequency range, lets you connect IEEE 802.11g or IEEE 802.11b and draft 802.11n technique devices to the network. Report No.: RF980930H02-1 6 Report Format Version 3.0.0

9. When the EUT operating in draft 802.11n, the software operation, which is defined by manufacturer, MCS (Modulation and Coding Schemes) from 0 to 7. 10. The EUT complies with draft 802.11n standards and backwards compatible with 802.11b, 802.11g products. 11. The EUT complies with draft 802.11n standards and backwards compatible with 802.11b, 802.11g products. 12. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. 3.2 DESCRIPTION OF TEST MODES Eleven channels are provided for 802.11b, 802.11g: CHANNEL FREQUENCY CHANNEL FREQUENCY 1 2412MHz 7 2442MHz 2 2417MHz 8 2447MHz 3 2422MHz 9 2452MHz 4 2427MHz 10 2457MHz 5 2432MHz 11 2462MHz 6 2437MHz Seven channels are provided for draft 802.11n (40MHz): CHANNEL FREQUENCY CHANNEL FREQUENCY 1 2422MHz 5 2442MHz 2 2427MHz 6 2447MHz 3 2432MHz 7 2452MHz 4 2437MHz Report No.: RF980930H02-1 7 Report Format Version 3.0.0

3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL: EUT Applicable to configure Description mode PLC RE<1G RE≥1G - √ √ √ Co-located mode Where PLC: Power Line Conducted Emission RE<1G RE: Radiated Emission below 1GHz RE≥1G: Radiated Emission above 1GHz APCM: Antenna Port Conducted Measurement Note1: Pre-Scan has been conducted to determine the worst case mode from antenna power. Note2: The worst card was found in U727 (Channel Frequency: 1880MHz). POWER LINE CONDUCTED EMISSION TEST:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11g / 3G 1 to 11/ - 1 / 512 OFDM / CDMA BPSK / - 6/- Radiated Emission Test (Below 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11g / 3G 1 to 11/ - 1 / 512 OFDM / CDMA BPSK / - 6/- Radiated Emission Test (Above 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11g / 3G 1 to 11/ - 1 / 512 OFDM / CDMA BPSK / - 6/- TEST CONDITION: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER (SYSTEM) TESTED BY RE≥1G 26deg. C, 62%RH, 957 hPa 120Vac, 60Hz Rex Huang RE<1G 29deg. C, 67%RH, 957 hPa 120Vac, 60Hz Rex Huang PLC 25deg. C, 60%RH, 957 hPa 120Vac, 60Hz Frank Liu Report No.: RF980930H02-1 8 Report Format Version 3.0.0

3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a Mobile Wireless Router. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: 47 CFR Part 15, Subpart C. (15.247) ANSI C63.4 : 2003 All tests have been performed and recorded as per the above standards. NOTE: The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of 47 CFR Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF980930H02-1 9 Report Format Version 3.0.0

3.5 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID NOTEBOOK 1 DELL PP18L 6976685584 FCC DoC COMPUTER Universal Radio 2 R&S CMU 200 101095 NA Communication Tester 3 3G card HUAWEI E180 NA QISE180 NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 UTP cable (Unshielded, 10m) 2 NA 3 NA NOTE: All power cords of the above support units are non-shielded (1.8m). Report No.: RF980930H02-1 10 Report Format Version 3.0.0

3.6 CONFIGURATION OF SYSTEM UNDER TEST Adapter 3. 3G card (on test table) EUT TEST TABLE Wireless UTP Cable (10m) 1. NOTEBOOK 2. Universal Radio COMPUTER Communication Tester CONTROL ROOM Report No.: RF980930H02-1 11 Report Format Version 3.0.0

4 TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15-0.5 66 to 56 56 to 46 0.5-5 56 46 5-30 60 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.1.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL ROHDE & SCHWARZ ESCS 30 100287 Mar. 05, 2009 Mar. 04, 2010 Test Receiver Line-Impedance Stabilization Network KNW-407 8-1395-12 May 04, 2009 May 03, 2010 (for EUT) Line-Impedance Stabilization Network ENV-216 100072 June 08, 2009 June 07, 2010 (for Peripheral) RF Cable (JYEBAO) 5DFB COACAB-001 Dec 15, 2008 Dec 14, 2009 50 ohms Terminator 50 3 Nov. 05, 2008 Nov. 04, 2009 BV Software NA NA NA ADT_Cond_V7.3.7 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. A. 3 The VCCI Con A Registration No. is C-817. Report No.: RF980930H02-1 12 Report Format Version 3.0.0

4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) were not recorded. 4.1.4 DEVIATION FROM TEST STANDARD No deviation 4.1.5 TEST SETUP V e r tic a l G r o u n d R e f e r e n c e P la n e T e s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n t a l G r o u n d R e fe r e n c e P la n e N o t e : 1 .S u p p o r t u n its w e r e c o n n e c te d to s e c o n d L IS N . 2 .B o t h o f L IS N s (A M N ) a r e 8 0 c m fr o m E U T a n d a t le a s t 8 0 fr o m o th e r u n its a n d o th e r m e ta l p la n e s For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. Report No.: RF980930H02-1 13 Report Format Version 3.0.0

4.1.6 EUT OPERATING CONDITIONS a. Placed the EUT on testing table. b. The 3G card link support unit 2 (Universal Radio Communication Tester) via wireless. c. Prepared other computer systems (support unit 1) to act as communication partners and placed them outside of testing area. d. The communication partners run test program “ART 5.3B36.exe” to enable EUT under transmission/receiving condition continuously via one UTP cable. e. Repeat steps b-e. Report No.: RF980930H02-1 14 Report Format Version 3.0.0

4.1.7 TEST RESULTS PHASE Line (L) 6dB BANDWIDTH 9 kHz TEST MODE Co-location made Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.156 0.26 42.20 - 42.46 - 65.65 55.65 -23.19 - 2 0.372 0.09 36.80 - 36.89 - 58.45 48.45 -21.55 - 3 2.331 0.08 33.57 - 33.65 - 56.00 46.00 -22.35 - 4 8.223 0.20 32.72 - 32.92 - 60.00 50.00 -27.08 - 5 19.707 0.48 42.78 - 43.26 - 60.00 50.00 -16.74 - 6 28.685 0.64 35.26 - 35.90 - 60.00 50.00 -24.10 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF980930H02-1 15 Report Format Version 3.0.0

PHASE Neutral (N) 6dB BANDWIDTH 9 kHz TEST MODE Co-location made Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.158 0.26 44.06 - 44.32 - 65.56 55.56 -21.24 - 2 0.341 0.12 41.19 - 41.31 - 59.17 49.17 -17.86 - 3 2.516 0.12 29.17 - 29.29 - 56.00 46.00 -26.71 - 4 7.906 0.23 33.54 - 33.77 - 60.00 50.00 -26.23 - 5 19.709 0.51 43.03 - 43.54 - 60.00 50.00 -16.46 - 6 29.234 0.73 33.94 - 34.67 - 60.00 50.00 -25.33 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF980930H02-1 16 Report Format Version 3.0.0

4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT Emissions radiated outside of the specified bands, shall be according to the general radiated limits in 15.209 as following: Frequencies Field strength Measurement distance (meters) (MHz) (microvolts/meter) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF980930H02-1 17 Report Format Version 3.0.0

4.2.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL ROHDE & SCHWARZ FSP40 100036 Dec. 9, 2008 Dec. 08, 2009 Spectrum Analyzer Agilent PSA E4446A MY46180622 Apr. 24 , 2009 Apr. 23 , 2010 Spectrum Analyzer HP Pre_Amplifier 8449B 3008A01923 Nov. 10, 2008 Nov. 09, 2009 ROHDE & SCHWARZ ESCS30 847124/029 Aug. 28, 2009 Aug. 28, 2010 Test Receiver SCHWARZBECK TRILOG Broadband VULB 9168 138 Apr. 29, 2009 Apr. 28, 2010 Antenna Schwarzbeck BBHA9120 D124 Dec. 09, 2008 Dec. 08, 2009 Horn_Antenna Schwarzbeck BBHA 9170 BBHA9170153 Jan. 22, 2009 Jan. 21, 2010 Horn_Antenna R&S Loop Antenna HFH2-Z2 100070 Jan. 14, 2008 Jan. 13, 2010 RF Switches EMH-011 08009 Sep. 26, 2009 Sep. 25, 2010 RF CABLE (Chaintek) Sucoflex 106 28077 Aug. 14, 2009 Aug. 13, 2010 RF Cable 8D STCCAB-001 Sep. 26, 2009 Sep. 25, 2010 ADT_Radiated_ Software NA NA NA V7.6.15.9.2 CT Antenna Tower & NA NA NA NA Turn Table Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, HP preamplifier (model: 8449B) and Spectrum Analyzer (model: FSP40) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Open Site No. C. 4. The FCC Site Registration No. is 656396. 5. The VCCI Site Registration No. is R-1626. 6. The CANADA Site Registration No. is IC 7450G-3. Report No.: RF980930H02-1 18 Report Format Version 3.0.0

4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 10 meter open area test site. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was 10 dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10 dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Peak detection (PK) and Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 1 MHz for Peak detection at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz for Average detection (AV) at frequency above 1GHz. Report No.: RF980930H02-1 19 Report Format Version 3.0.0

4.2.4 TEST SETUP For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.2.5 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: RF980930H02-1 20 Report Format Version 3.0.0

4.2.6 TEST RESULTS BELOW 1GHz WORST-CASE DATA：802.11g OFDM MODULATION EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 512 FREQUENCY RANGE 30-1000 MHz DETECTOR Peak (PK) INPUT POWER 120Vac, 60 Hz FUNCTION Average (AV) ENVIRONMENTAL 26deg. C, 62%RH TESTED BY Rex Huang CONDITIONS 957hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 250.00 37.31 QP 46.00 -8.69 1.03 H 114 23.61 13.70 2 320.00 33.62 QP 46.00 -12.38 1.00 H 285 17.11 16.51 3 500.00 33.41 QP 46.00 -12.59 1.57 H 118 12.10 21.31 4 640.00 38.13 QP 46.00 -7.87 1.30 H 184 13.86 24.27 5 746.67 40.48 QP 46.00 -5.52 1.09 H 135 14.82 25.66 6 853.33 39.05 QP 46.00 -6.95 1.00 H 191 11.63 27.42 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 125.00 27.91 QP 43.50 -15.59 1.00 V 4 15.43 12.48 2 250.00 31.88 QP 46.00 -14.12 1.00 V 340 18.18 13.70 3 500.00 31.70 QP 46.00 -14.30 1.66 V 148 10.39 21.31 4 640.00 39.17 QP 46.00 -6.83 1.00 V 63 14.90 24.27 5 746.67 37.38 QP 46.00 -8.62 1.00 V 70 11.72 25.66 6 853.33 37.22 QP 46.00 -8.78 1.39 V 51 9.80 27.42 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF980930H02-1 21 Report Format Version 3.0.0

4.2.7 TEST RESULTS Above 1GHz WORST-CASE DATA : 802.11g OFDM MODULATION EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 512 FREQUENCY RANGE 1 ~ 17.5GHz DETECTOR Peak (PK) INPUT POWER 120Vac, 60 Hz FUNCTION Average (AV) ENVIRONMENTAL 29deg. C, 67%RH TESTED BY Rex Huang CONDITIONS 957hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 67.90 PK 74.00 -6.10 1.00 H 257 37.62 30.28 2 2390.00 52.06 AV 54.00 -1.94 1.00 H 257 21.78 30.28 3 2862.00 48.79 PK 74.00 -25.21 1.20 H 135 16.85 31.94 4 2862.00 38.42 AV 54.00 -15.58 1.20 H 135 6.48 31.94 5 4824.00 44.70 PK 74.00 -29.30 1.42 H 360 7.91 36.79 6 4824.00 31.80 AV 54.00 -22.20 1.42 H 360 -4.99 36.79 7 7236.00 50.20 PK 74.00 -23.80 1.20 H 90 7.06 43.14 8 7236.00 39.10 AV 54.00 -14.90 1.20 H 90 -4.04 43.14 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 58.70 PK 74.00 -15.30 1.00 V 247 28.42 30.28 2 2390.00 45.28 AV 54.00 -8.72 1.00 V 247 15.00 30.28 3 2862.00 50.18 PK 74.00 -23.82 1.18 V 289 18.24 31.94 4 2862.00 39.28 AV 54.00 -14.72 1.18 V 289 7.34 31.94 5 4824.00 48.34 PK 74.00 -25.66 1.38 V 238 11.55 36.79 6 4824.00 35.18 AV 54.00 -18.82 1.38 V 238 -1.61 36.79 7 7236.00 51.70 PK 74.00 -22.30 1.08 V 234 8.56 43.14 8 7236.00 39.25 AV 54.00 -14.75 1.08 V 234 -3.89 43.14 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF980930H02-1 22 Report Format Version 3.0.0

5 INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025. USA FCC, NVLAP Germany TUV Rheinland Japan VCCI Norway NEMKO Canada INDUSTRY CANADA , CSA R.O.C. TAF, BSMI, NCC Netherlands Telefication Singapore GOST-ASIA(MOU) Russia CERTIS(MOU) Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26052943 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Email: service@adt.com.tw Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: RF980930H02-1 23 Report Format Version 3.0.0

6 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. --- END --- Report No.: RF980930H02-1 24 Report Format Version 3.0.0


Document Created: 2009-11-12 17:16:32
Document Modified: 2009-11-12 17:16:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC