User Manual

FCC ID: KA2DWLG122B1

Users Manual

Download: PDF
FCCID_455893

This product works with the following operating DWL-G122 system software: Windows XP, Windows AirPlus GTM High Speed 802.11g 2000, Windows Me, Windows 98SE USB Wireless Adapter Before You Begin You must have at least the following: • You will need a computer with an available USB port to connect the DWL-G122 Wireless USB adapter. • At least a 500 MHz processor and 62 MB of memory • An 802.11b or 802.11g Access Point (for Infrastructure Mode) or another 802. 11b or 802.11g wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.) • Properly installed and working USB Controller. Check Your Package Contents These are the items included with your DWL-G122 purchase: DWL-G122 Wireless USB Adapter CD-ROM (containing Drivers, Manual and Warranty) Cradle If any of the above items are missing, please contact your reseller. @2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. 1

DWL-G122 Overview Link/Power LED Link - Indicates that the DWL-G122 is properly installed in the computer. USB Connector Power - blinks when data is being Connects to Yours transmitted through the wireless desktop or laptop connection. computerl. Antenna Used to wirelessly connect to 802.11b or 802.11g networks. Insert the D-Link CD-ROM Into Your Computer Turn on the computer and Do NOT install the DWL-G122 Insert the D- Link AirPuls GTM DWL- USB Adapter into your G122 Driver CD in the CD-ROM drive. computer before The step-by-step instructions that follow are installing the driver shown in Windows XP. The steps and screens software on the D-Link are similar for the other Windows operating CD! systems The Install Screen will appear. Click Install Drivers 2

The letter “D” If the CD Autorun function does not represents the automatically start on your computer , letter of the CD-ROM type “D:\Driver\Setup.exe” If it does drive. Your CD-ROM start, proceed to the next screen. drive may be a different drive letter. Click Next Click Next Click Next 3

Click Continue Anyway Click No, I will restart my computer later Click Finish Shut down your computer Installing the DWL-G122 Wireless USB Adapter to Your Laptop Computer A. Make sure to turn off your computer. B. Insert one end of the USB Adapter into the provided USB cable and plug the other end into your computer’s USB Port. 4

Restart Your Computer When you restart your computer this Found New Hardware Wizard (Windows XP) screen will appear: Select Install the software automatically (Recommended) Click Next Windows XP will automatically load the driver files. Click Continue Anyway Click Finish 5

For Windows 2000, this Digital Signature Not Found screen may appear during the installation. Click Yes to continue the installation For Windows Me and 98, this screen may appear. Click Yes to finalize the installation Your Installation is Complete! After you’ve continued in Windows XP (or after the computer restarts in the other Windows operating systems), the D-Link AirPlus DWL-G122 Con- figuration Utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray). If this icon appears GREEN, then you have successfully installed the DWL-G122, are connected to a wireless network and are ready to communicate! Double-click the utility icon to use the configuration utility. 6

Appendix Using the Configuration Utility A. Status: Displays the MAC Address of the B. SSID : The Service Set Identifier C. Frequency: Access Point that is is the name assigned to the Displays the current associated with the wireless network. The factory frequency used by DW L-G122. SSID setting is set to default. the adapter. D. Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used for peer-to-peer networking. E. Encryption: Displays the current encryption status of the wireless connection. A B C D E F G H I J F. Connection Info: G. TxRate: The H. Channel: Displays I. Signal Displays connected or default setting is the channel Strength / Link authenticated Auto; meaning, information. By Quality: Repre- information. TxRate settings default, the channel sents the are automatically is set to 6. Please wireless signal determined by note that the DW L- quality and the DWL-G122 G122 will automati- strength between depending on the cally adjust channel the access point distance from the depending on the and the DW L- access point. Access Point. G122. The percentage J. Packet Count: Graphically displays the statistics of data coincides with transmitted and received. the graphical bar. 7

Appendix Using the Configuration Utility (cont.) K. SSID: The Service Set Identifier is the name as- signed to the wireless L. Wireless Mode: network. The factory SSID The factory setting is M. Data Encryption: The setting is set to default. Make set to Infrastructure. default setting is set to changes here to match the Ad-Hoc mode is used Disabled. The adapter SSID on existing W ireless for peer-to-peer supports W EP when Router or Access Point. networking. encryption is enabled. K L M N O P N. Authentication: You can specify O. Key Length: W hen encryption is enabled, the authentication mode for the you will have the option to specify the level and wireless network. The default key format of the encryption used. Select the setting is set to Open Authentica- appropriate Key Index : 1-4 and enter ACSII or tion. hexadecimal digits in the appropriate field. P. IEEE 802.1x: When encryption is enabled, you will have the option to specify the level and key format of the encryption used. Select the appropriate Key Index : 1-4 and enter ACSII or hexadecimal digits in the appropriate field. 8

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. "D-Link declare that DWL-G122 (802.11g/2.4GHz Wireless USB Adapter) is limited in CH1~CH11 by specified firmware controlled in USA." The equipment has been SAR-evaluated and authorized for use in laptops / notebook


Document Created: 2004-07-30 11:12:05
Document Modified: 2004-07-30 11:12:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC