SAR Measurement plots 1

FCC ID: KA2DWLAG132A1

RF Exposure Info

Download: PDF
FCCID_513741

A2 : TEST DATA Date/Time: 11/03/04 17:25:46 Test Laboratory: Advance Data Technology DWL-AG132 11a Bottom Mode 1 Ch 1 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5180 MHz Communication System: 802.11a ; Frequency: 5180 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5180 MHz; σ = 5.32 mho/m; εr = 47.3; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 5 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(4.29, 4.29, 4.29) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510 ; Calibrated: 2004/8/17 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22 ; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 1 Low Channel/Area Scan (7x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.135 mW/g Band 1 Low Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 2.47 V/m; Power Drift = 0.2 dB Peak SAR (extrapolated) = 10155441.0 W/kg SAR(1 g) = 0.027 mW/g; SAR(10 g) = 0.00805 mW/g Maximum value of SAR (measured) = 0.145 mW/g

Date/Time: 11/03/04 17:58:54 Test Laboratory: Advance Data Technology DWL-AG132 11a Bottom Mode 1 Ch 4 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5240 MHz Communication System: 802.11a ; Frequency: 5240 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5240 MHz; σ = 5.4 mho/m; εr = 47.1; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 5 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(4.29, 4.29, 4.29) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510 ; Calibrated: 2004/8/17 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22 ; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 1 High Channel/Area Scan (7x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.230 mW/g Band 1 High Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 3.42 V/m; Power Drift = 0.2 dB Peak SAR (extrapolated) = 1393111.1 W/kg SAR(1 g) = 0.073 mW/g; SAR(10 g) = 0.023 mW/g Maximum value of SAR (measured) = 0.255 mW/g

Date/Time: 11/03/04 18:47:23 Test Laboratory: Advance Data Technology DWL-AG132 11a Bottom Mode 1 Ch 5 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5260 MHz Communication System: 802.11a ; Frequency: 5260 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5260 MHz; σ = 5.43 mho/m; εr = 47.2; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 5 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(4.29, 4.29, 4.29) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510 ; Calibrated: 2004/8/17 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22 ; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 2 Low Channel/Area Scan (7x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.239 mW/g Band 2 Low Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 4.03 V/m; Power Drift = 0.2 dB Peak SAR (extrapolated) = 3334010.4 W/kg SAR(1 g) = 0.069 mW/g; SAR(10 g) = 0.024 mW/g Maximum value of SAR (measured) = 0.272 mW/g

Date/Time: 11/03/04 19:44:04 Test Laboratory: Advance Data Technology DWL-AG132 11a Bottom Mode 1 Ch 8 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5320 MHz Communication System: 802.11a ; Frequency: 5320 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5320 MHz; σ = 5.52 mho/m; εr = 47.1; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 5 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(4.29, 4.29, 4.29) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510 ; Calibrated: 2004/8/17 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22 ; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 2 High Channel/Area Scan (7x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.392 mW/g Band 2 High Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 5.32 V/m; Power Drift = 0.2 dB Peak SAR (extrapolated) = 6397567.0 W/kg SAR(1 g) = 0.135 mW/g; SAR(10 g) = 0.053 mW/g Maximum value of SAR (measured) = 0.468 mW/g

Date/Time: 11/03/04 19:44:04 Test Laboratory: Advance Data Technology DWL-AG132 11a Bottom Mode 1 Ch 9 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5745 MHz Communication System: 802.11a ; Frequency: 5745 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5745 MHz; σ = 6.11 mho/m; εr = 46.2; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 5 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(3.96, 3.96, 3.96) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510 ; Calibrated: 2004/8/17 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22 ; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 3 Low Channel/Area Scan (7x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.416 mW/g Band 3 Low Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 5.13 V/m; Power Drift = 0.2 dB Peak SAR (extrapolated) = 10313151.9 W/kg SAR(1 g) = 0.050 mW/g; SAR(10 g) = 0.017 mW/g Maximum value of SAR (measured) = 0.382 mW/g

Date/Time: 11/03/04 20:14:53 Test Laboratory: Advance Data Technology DWL-AG132 11a Bottom Mode 1 Ch 11 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5785 MHz Communication System: 802.11a ; Frequency: 5785 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5785 MHz; σ = 6.16 mho/m; εr = 46.2; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 5 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(3.96, 3.96, 3.96) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510 ; Calibrated: 2004/8/17 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22 ; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 3 Middle Channel/Area Scan (7x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.452 mW/g Band 3 Middle Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 5.8 V/m; Power Drift = 0.2 dB Peak SAR (extrapolated) = 4281793.2 W/kg SAR(1 g) = 0.112 mW/g; SAR(10 g) = 0.030 mW/g Maximum value of SAR (measured) = 0.460 mW/g

Date/Time: 11/03/04 20:46:12 Test Laboratory: Advance Data Technology DWL-AG132 11a Bottom Mode 1 Ch 13 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5825 MHz Communication System: 802.11a ; Frequency: 5825 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5825 MHz; σ = 6.22 mho/m; εr = 46.1; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 5 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(3.96, 3.96, 3.96) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510 ; Calibrated: 2004/8/17 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22 ; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 3 High Channel/Area Scan (7x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.449 mW/g Band 3 High Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 6.14 V/m; Power Drift = 0.2 dB Peak SAR (extrapolated) = 10742746.0 W/kg SAR(1 g) = 0.121 mW/g; SAR(10 g) = 0.035 mW/g Maximum value of SAR (measured) = 0.462 mW/g

Date/Time: 11/03/04 10:27:34 Test Laboratory: Advance Data Technology DWL-AG132 11a Tip Mode 2 Ch 1 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5180 MHz Communication System: 802.11a ; Frequency: 5180 MHz; Duty Cycle: 1:1; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5180 MHz; σ = 5.32 mho/m; εr = 47.3; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 0 mm (The tip of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(4.29, 4.29, 4.29) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2004/8/17 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 1 Low Channel/Area Scan (9x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.300 mW/g Band 1 Low Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 7.25 V/m; Power Drift = 0.2 dB Peak SAR (extrapolated) = 7693133.2 W/kg SAR(1 g) = 0.080 mW/g; SAR(10 g) = 0.020 mW/g Maximum value of SAR (measured) = 0.285 mW/g

Date/Time: 11/03/04 10:57:17 Test Laboratory: Advance Data Technology DWL-AG132 11a Tip Mode 2 Ch 4 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5240 MHz Communication System: 802.11a ; Frequency: 5240 MHz; Duty Cycle: 1:1; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5240 MHz; σ = 5.4 mho/m; εr = 47.1; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 0 mm (The tip of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(4.29, 4.29, 4.29) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2004/8/17 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 1 High Channel/Area Scan (9x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.653 mW/g Band 1 High Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 11.7 V/m; Power Drift = 0.1 dB Peak SAR (extrapolated) = 9.05 W/kg SAR(1 g) = 0.181 mW/g; SAR(10 g) = 0.052 mW/g Maximum value of SAR (measured) = 0.651 mW/g

Date/Time: 11/03/04 11:26:15 Test Laboratory: Advance Data Technology DWL-AG132 11a Tip Mode 2 Ch 5 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5260 MHz Communication System: 802.11a ; Frequency: 5260 MHz; Duty Cycle: 1:1; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5260 MHz; σ = 5.43 mho/m; εr = 47.2; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 0 mm (The tip of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(4.29, 4.29, 4.29) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2004/8/17 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 2 Low Channel/Area Scan (9x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.658 mW/g Band 2 Low Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 12.6 V/m; Power Drift = -0.0 dB Peak SAR (extrapolated) = 23636355.7 W/kg SAR(1 g) = 0.184 mW/g; SAR(10 g) = 0.051 mW/g Maximum value of SAR (measured) = 0.680 mW/g

Date/Time: 11/03/04 11:55:30 Test Laboratory: Advance Data Technology DWL-AG132 11a Tip Mode 2 Ch 8 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5320 MHz Communication System: 802.11a ; Frequency: 5320 MHz; Duty Cycle: 1:1; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5320 MHz; σ = 5.52 mho/m; εr = 47.1; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 0 mm (The tip of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(4.29, 4.29, 4.29) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2004/8/17 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 2 High Channel/Area Scan (9x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 1.24 mW/g Band 2 High Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 16.2 V/m; Power Drift = 0.2 dB Peak SAR (extrapolated) = 3.32 W/kg SAR(1 g) = 0.358 mW/g; SAR(10 g) = 0.108 mW/g Maximum value of SAR (measured) = 1.27 mW/g

Date/Time: 11/03/04 12:24:26 Test Laboratory: Advance Data Technology DWL-AG132 11a Tip Mode 2 Ch 9 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5745 MHz Communication System: 802.11a ; Frequency: 5745 MHz; Duty Cycle: 1:1; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5745 MHz; σ = 6.11 mho/m; εr = 46.2; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 0 mm (The tip of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(3.96, 3.96, 3.96) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2004/8/17 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 3 Low Channel/Area Scan (9x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 1.02 mW/g Band 3 Low Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 13.5 V/m; Power Drift = 0.2 dB Peak SAR (extrapolated) = 360116.0 W/kg SAR(1 g) = 0.263 mW/g; SAR(10 g) = 0.069 mW/g Maximum value of SAR (measured) = 1.09 mW/g

Date/Time: 11/03/04 12:55:50 Test Laboratory: Advance Data Technology DWL-AG132 11a Tip Mode 2 Ch 11 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5785 MHz Communication System: 802.11a ; Frequency: 5785 MHz; Duty Cycle: 1:1; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5785 MHz; σ = 6.16 mho/m; εr = 46.2; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 0 mm (The tip of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(3.96, 3.96, 3.96) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2004/8/17 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 3 Middle Channel/Area Scan (9x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 1.07 mW/g Band 3 Middle Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 12.5 V/m; Power Drift = -0.1 dB Peak SAR (extrapolated) = 5.91 W/kg SAR(1 g) = 0.257 mW/g; SAR(10 g) = 0.077 mW/g Maximum value of SAR (measured) = 1.03 mW/g

Date/Time: 11/03/04 13:24:05 Test Laboratory: Advance Data Technology DWL-AG132 11a Tip Mode 2 Ch 13 DUT: D-Link AirPremier AG DWL-AG132 Wireless USB Adapter ; Type: DWL-AG132 ; Test Frequency: 5825 MHz Communication System: 802.11a ; Frequency: 5825 MHz; Duty Cycle: 1:1; Modulation type: OFDM Medium: MSL5800 Medium parameters used: f = 5825 MHz; σ = 6.22 mho/m; εr = 46.1; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 0 mm (The tip of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: EX3DV3 - SN3504 ; ConvF(3.96, 3.96, 3.96) ; Calibrated: 2004/2/20 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE3 Sn510; Calibrated: 2004/8/17 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.3 Build 22; Postprocessing SW: SEMCAD, V1.8 Build 127 Band 3 High Channel/Area Scan (9x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 1.04 mW/g Band 3 High Channel/Zoon Scan (8x8x9)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Reference Value = 14.7 V/m; Power Drift = -0.0 dB Peak SAR (extrapolated) = 2308298.4 W/kg SAR(1 g) = 0.269 mW/g; SAR(10 g) = 0.075 mW/g Maximum value of SAR (measured) = 1.09 mW/g


Document Created: 2005-02-09 01:32:04
Document Modified: 2005-02-09 01:32:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC