Test Report

FCC ID: KA2DIR330A1

Test Report

Download: PDF
FCCID_1398963

FCC TEST REPORT REPORT NO.: RF960215L12D MODEL NO.: DIR-330 FCC ID: KA2DIR330A1 RECEIVED: Dec. 14, 2010 TESTED: Dec. 16, 2010 ISSUED: Dec. 28, 2010 APPLICANT: D-Link Corporation ADDRESS: 17595 Mt. Herrmann, Fountain Valley, CA 92708, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 22 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: RF960215L12D 1 Report Format Version 4.0.0 Reference No.: 991214C20

TABLE OF CONTENTS RELEASE CONTROL RECORD.............................................................................................3 1. CERTIFICATION .....................................................................................................4 2. SUMMARY OF TEST RESULTS .............................................................................5 2.1 MEASUREMENT UNCERTAINTY...........................................................................5 3. GENERAL INFORMATION......................................................................................6 3.1 GENERAL DESCRIPTION OF EUT ........................................................................6 3.2 DESCRIPTION OF TEST MODES ..........................................................................7 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .....................................................7 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ..........................8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .........................................9 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................9 4. TEST TYPES AND RESULTS ...............................................................................10 4.1 RADIATED EMISSION MEASUREMENT .............................................................10 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT...........................................10 4.1.2 TEST INSTRUMENTS........................................................................................... 11 4.1.3 TEST PROCEDURES ...........................................................................................12 4.1.4 DEVIATION FROM TEST STANDARD .................................................................12 4.1.5 TEST SETUP.........................................................................................................13 4.1.6 EUT OPERATING CONDITIONS ..........................................................................13 4.1.7 TEST RESULTS ....................................................................................................14 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................15 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................15 4.2.2 TEST INSTRUMENTS...........................................................................................15 4.2.3 TEST PROCEDURES ...........................................................................................16 4.2.4 DEVIATION FROM TEST STANDARD .................................................................16 4.2.5 TEST SETUP.........................................................................................................17 4.2.6 EUT OPERATING CONDITIONS ..........................................................................17 4.2.7 TEST RESULTS ....................................................................................................18 5. PHOTOGRAPHS OF THE TEST CONFIGURATION............................................20 6. INFORMATION ON THE TESTING LABORATORIES ..........................................21 7. APPENDIX A – MODIFICATION RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB....................................................................................22 Report No.: RF960215L12D 2 Report Format Version 4.0.0 Reference No.: 991214C20

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Dec. 28, 2010 Report No.: RF960215L12D 3 Report Format Version 4.0.0 Reference No.: 991214C20

1. CERTIFICATION PRODUCT: WIRELESS VPN ROUTER MODEL: DIR-330 BRAND: D-Link APPLICANT: D-Link Corporation TESTED: Dec. 16, 2010 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.247) ANSI C63.4-2003 ANSI C63.10-2009 This report is issued as a supplementary report of RF960215L12. This report shall be used combined together with its original report. PREPARED BY : , DATE : Dec. 28, 2010 Polly Chien / Specialist APPROVED BY : , DATE : Dec. 28, 2010 Gary Chang / Assistant Manager NOTE: The conducted emission & radiated emission 30MHz ~ 1GHz tests were performed for the addendum. Refer to original report for the other test data. Report No.: RF960215L12D 4 Report Format Version 4.0.0 Reference No.: 991214C20

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications. APPLIED STANDARD: FCC Part 15, Subpart C Standard Test Type and Limit Result Remark Section Meet the requirement of limit. 15.207 AC Power Conducted Emission PASS Minimum passing margin is -16.08dB at 0.150MHz. Spectrum Bandwidth of a Direct 15.247(a)(2) Sequence Spread Spectrum System NA Refer to Note Limit: min. 500kHz Maximum Peak Output Power 15.247(b) NA Refer to Note Limit: max. 30dBm Meet the requirement of limit. Radiated Emissions 15.247(d) PASS Minimum passing margin is Limit: Table 15.209 -1.9dB at 35.70MHz. Power Spectral Density 15.247(e) NA Refer to Note Limit: max. 8dBm Band Edge Measurement 15.247(d) Limit: 20dB less than the peak value of NA Refer to Note fundamental frequency Antenna connector is R-SMA 15.203 Antenna Requirement PASS not a standard connector. NOTE: The conducted emission & radiated emission 30MHz ~ 1GHz tests were performed for the addendum. Refer to original report for the other test data. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENT FREQUENCY UNCERTAINTY Conducted emissions 150kHz~30MHz 2.44 dB 30MHz ~ 200MHz 2.93 dB 200MHz ~1000MHz 2.95 dB Radiated emissions 1GHz ~ 18GHz 2.26 dB 18GHz ~ 40GHz 1.94 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Report No.: RF960215L12D 5 Report Format Version 4.0.0 Reference No.: 991214C20

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT WIRELESS VPN ROUTER MODEL NO. DIR-330 FCC ID KA2DIR330A1 POWER SUPPLY 5Vdc (AC adapter) CCK, DQPSK, DBPSK for DSSS MODULATION TYPE 64QAM, 16QAM, QPSK, BPSK for OFDM MODULATION TECHNOLOGY DSSS, OFDM 802.11b: 11.0/ 5.5/ 2.0/ 1.0Mbps TRANSFER RATE 802.11g: 54.0/ 48.0/ 36.0/ 24.0/ 18.0/ 12.0/ 9.0/ 6.0Mbps OPERATING FREQUENCY 2412MHz ~ 2462MHz NUMBER OF CHANNEL 11 MAXIMUM OUTPUT POWER 40.6mW ANTENNA TYPE Dipole antenna with 2dBi gain ANTENNA CONNECTOR R-SMA DATA CABLE NA I/O PORTS RJ45, USB ACCESSORY DEVICES AC adapter NOTE: 1. This report is based on ADT report with Reference No.: RF960215L12. The original report was issued by Advance Data Technology Corp. (ADT Corp.) on Feb. 27, 2007. ADT Corp. is one of Bureau Veritas family and she has fully transferred all its test facilities, staffs & service system to Bureau Veritas Consumer Products Services (Hong Kong) Limited, Taoyuan Branch in 2008. 2. This report is a supplementary report of RF960215L12. This report is prepared for FCC class II permissive change. The difference compared with original report is adding an adapter, therefore the conducted emission & radiated emission 30MHz ~ 1GHz items are re-tested in this report. 3. The EUT was powered by the following adapter: Brand: D-Link Model: CF1505-B Input: 100-120Vac, 50-60Hz, 0.4A Output: 5Vdc, 2.5A Power Line: DC 1.8m non-shielded cable without core 4. The EUT complies with IEEE 802.11g standards and backwards compatible with IEEE 802.11b products. 5. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF960215L12D 6 Report Format Version 4.0.0 Reference No.: 991214C20

3.2 DESCRIPTION OF TEST MODES Eleven channels are provided to this EUT. CHANNEL FREQUENCY CHANNEL FREQUENCY 1 2412MHz 7 2442MHz 2 2417MHz 8 2447MHz 3 2422MHz 9 2452MHz 4 2427MHz 10 2457MHz 5 2432MHz 11 2462MHz 6 2437MHz 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST 1.8m RJ45 UTP cable x 3 with 100Ω Load USB cable Printer Antenna Antenna EUT (Power from AC adapter) *Test Table 10m UTP RJ45 cable x 2 Notebook x 2 *Keep in a remote area Report No.: RF960215L12D 7 Report Format Version 4.0.0 Reference No.: 991214C20

3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE<1G PLC - √ √ - Where PLC: Power Line Conducted Emission RE<1G: Radiated Emission below 1GHz RADIATED EMISSION TEST (BELOW 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11g 1 to 11 11 OFDM BPSK 6 POWER LINE CONDUCTED EMISSION TEST:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates, and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11g 1 to 11 11 OFDM BPSK 6 TEST CONDITION: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE<1G 20 deg. C, 66% RH, 989 hPa 120Vac, 60Hz Frank Wang PLC 20 deg. C, 60% RH, 986 hPa 120Vac, 60Hz Match Tsui Report No.: RF960215L12D 8 Report Format Version 4.0.0 Reference No.: 991214C20

3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) ANSI C63.4-2003 ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. NOTE: The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 NOTEBOOK DELL PP05L 12130898320 E2K24CLNS 2 NOTEBOOK HP N6000 CNU3480WP2 NA 3 PRINTER HP 1010 NA NA NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 10m RJ45 UTP cable. 2 10m RJ45 UTP cable. 3 1.2m USB cable. NOTE: 1. All power cords of the above support units are non shielded (1.8m). 2. Items 1-2 acted as communication partners to transfer data. Report No.: RF960215L12D 9 Report Format Version 4.0.0 Reference No.: 991214C20

4. TEST TYPES AND RESULTS 4.1 RADIATED EMISSION MEASUREMENT 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT Emissions radiated outside of the specified bands, shall be according to the general radiated limits in 15.209 as following: FIELD STRENGTH MEASUREMENT FREQUENCIES (MHz) (microvolts/meter) DISTANCE (meters) 0.009 ~ 0.490 2400 / F(kHz) 300 0.490 ~ 1.705 24000 / F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF960215L12D 10 Report Format Version 4.0.0 Reference No.: 991214C20

4.1.2 TEST INSTRUMENTS DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESCI 100424 Aug. 04, 2010 Aug. 03, 2011 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100041 Jul. 09, 2010 Jul. 08, 2011 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-156 Apr. 30, 2010 Apr. 29, 2011 SCHWARZBECK HORN Antenna BBHA 9120 D 9120D-209 Aug. 02, 2010 Aug. 01, 2011 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170242 Dec. 25, 2009 Dec. 24, 2010 SCHWARZBECK Preamplifier 8449B 3008A01910 Sep. 09, 2010 Sep. 08, 2011 Agilent Preamplifier 8447D 2944A10638 Nov. 03, 2010 Nov. 02, 2011 Agilent RF signal cable 218190/4 SUCOFLEX 104 May 14, 2010 May 13, 2011 HUBER+SUHNNER 231241/4 RF signal cable 8D-FB Cable-HYCH9-01 Aug. 20, 2010 Aug. 19, 2011 Worken ADT_Radiated_ Software NA NA NA V7.6.15.9.2 Antenna Tower 2070/2080 512.835.4684 NA NA EMCO Turn Table 2087-2.03 NA NA NA EMCO Antenna Tower &Turn Table Controller 2090 NA NA NA EMCO NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 9. 3. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Site Registration No. is 460141. 5. The IC Site Registration No. is IC 7450F-4. Report No.: RF960215L12D 11 Report Format Version 4.0.0 Reference No.: 991214C20

4.1.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meters semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Peak detection (PK) and Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF960215L12D 12 Report Format Version 4.0.0 Reference No.: 991214C20

4.1.5 TEST SETUP For the actual test configuration, please refer to the attached file (Test Setup Photo) 4.1.6 EUT OPERATING CONDITIONS a. Placed the EUT on the testing table. b. Prepared notebook system outside of testing area to act as communication partner. c. The communication partner connected with EUT via a RJ45 UTP cable and run a test program (provided by manufacturer) to enable EUT under transmission condition continuously at specific channel frequency. d. The communication partner sent data to EUT by command "PING". Report No.: RF960215L12D 13 Report Format Version 4.0.0 Reference No.: 991214C20

4.1.7 TEST RESULTS BELOW 1GHz WORST-CASE DATA：802.11g EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 11 FREQUENCY RANGE Below 1000MHz DETECTOR INPUT POWER 120Vac, 60 Hz Quasi-Peak FUNCTION ENVIRONMENTAL 20deg. C, 66%RH TESTED BY Frank Wang CONDITIONS 989 hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 131.00 40.9 QP 43.5 -2.6 2.50 H 316 28.70 12.20 2 164.06 39.8 QP 43.5 -3.7 1.50 H 274 26.30 13.50 3 267.10 40.5 QP 46.0 -5.5 1.00 H 319 27.30 13.20 4 395.54 42.8 QP 46.0 -3.2 1.00 H 57 26.80 16.00 5 500.42 41.7 QP 46.0 -4.3 1.75 H 28 22.40 19.30 6 809.56 41.5 QP 46.0 -4.5 1.00 H 190 16.10 25.40 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 35.70 38.1 QP 40.0 -1.9 1.21 V 127 25.90 12.20 2 111.56 39.8 QP 43.5 -3.7 1.00 V 199 29.00 10.80 3 395.62 43.1 QP 46.0 -2.9 1.21 V 322 27.10 16.00 4 500.42 39.0 QP 46.0 -7.0 1.00 V 1 19.70 19.30 5 667.63 38.7 QP 46.0 -7.3 1.75 V 82 16.20 22.50 6 792.06 38.5 QP 46.0 -7.5 1.50 V 328 13.30 25.20 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF960215L12D 14 Report Format Version 4.0.0 Reference No.: 991214C20

4.2 CONDUCTED EMISSION MEASUREMENT 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15-0.5 66 to 56 56 to 46 0.5-5 56 46 5-30 60 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.2.2 TEST INSTRUMENTS DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESCS30 100289 Nov. 23, 2010 Nov. 22, 2011 ROHDE & SCHWARZ RF signal cable 5D-FB Cable-HYCO2-01 Dec. 31, 2009 Dec. 30, 2010 Woken LISN ESH2-Z5 100100 Dec. 25, 2009 Dec. 24, 2010 ROHDE & SCHWARZ LISN ESH3-Z5 100311 Jul. 08, 2010 Jul. 07, 2011 ROHDE & SCHWARZ Software ADT_Cond_ NA NA NA ADT V7.3.7 NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 2. 3. The VCCI Site Registration No. is C-2047. Report No.: RF960215L12D 15 Report Format Version 4.0.0 Reference No.: 991214C20

4.2.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF960215L12D 16 Report Format Version 4.0.0 Reference No.: 991214C20

4.2.5 TEST SETUP V e rtic a l G r o u n d R e fe r e n c e P la n e Te s t R e c e iv e r EUT 40cm 80cm L IS N H o riz o n ta l G ro u n d R e fe re n c e P la n e N o t e : 1 .S u p p o rt u n its w e r e c o n n e c te d to s e c o n d L IS N . 2 .B o th o f L IS N s ( A M N ) a r e 8 0 c m fro m E U T a n d a t le a s t 8 0 fro m o t h e r u n its a n d o t h e r m e ta l p la n e s For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6. Report No.: RF960215L12D 17 Report Format Version 4.0.0 Reference No.: 991214C20

4.2.7 TEST RESULTS CONDUCTED WORST-CASE DATA: 802.11g PHASE Line 1 6dB BANDWIDTH 9kHz Emission Corr. Reading Value Limit Margin Freq. Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.150 0.16 49.76 - 49.92 - 66.00 56.00 -16.08 - 2 0.275 0.17 41.76 - 41.93 - 60.97 50.97 -19.04 - 3 0.369 0.18 41.14 - 41.32 - 58.53 48.53 -17.21 - 4 1.465 0.27 31.16 - 31.43 - 56.00 46.00 -24.57 - 5 2.637 0.32 33.00 - 33.32 - 56.00 46.00 -22.68 - 6 8.637 0.35 37.82 - 38.17 - 60.00 50.00 -21.83 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960215L12D 18 Report Format Version 4.0.0 Reference No.: 991214C20

PHASE Line 2 6dB BANDWIDTH 9kHz Emission Corr. Reading Value Limit Margin Freq. Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.150 0.12 48.56 - 48.68 - 66.00 56.00 -17.32 - 2 0.193 0.13 39.86 - 39.99 - 63.91 53.91 -23.92 - 3 0.271 0.14 36.20 - 36.34 - 61.08 51.08 -24.74 - 4 2.156 0.30 35.16 - 35.46 - 56.00 46.00 -20.54 - 5 3.430 0.34 34.02 - 34.36 - 56.00 46.00 -21.64 - 6 8.422 0.42 39.14 - 39.56 - 60.00 50.00 -20.44 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: RF960215L12D 19 Report Format Version 4.0.0 Reference No.: 991214C20

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF960215L12D 20 Report Format Version 4.0.0 Reference No.: 991214C20

6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF Lab Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab Tel: 886-3-3183232 Fax: 886-3-3185050 Email: service@adt.com.tw Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: RF960215L12D 21 Report Format Version 4.0.0 Reference No.: 991214C20

7. APPENDIX A – MODIFICATION RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. --- END --- Report No.: RF960215L12D 22 Report Format Version 4.0.0 Reference No.: 991214C20


Document Created: 2010-12-30 09:42:47
Document Modified: 2010-12-30 09:42:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC