Response to ATCB comments

FCC ID: KA2DI-754

Cover Letter(s)

Download: PDF

FCCID_307279

dward
From: ellis@adt.com.tw
Sent: Sunday, March 02, 2003 6:38 PM
To: dward@americantcb.com
Cc: 'Alan Lane ADT'; ellis@adt.com.tw
Subject: ¦^«H¡G KA2DI-754 COMMENTS

Dear Dennis,

(1)650 WLAN is accomplished via software, only the 650WLAN card inserted into the
expansion slot can be activated

(2)Yes, both EUT and the WLAN expansion card were operating during Radiated Spurious
emissions

Thanks
吳佳鑫 / Ellis Wu
E-mail : Ellis@ADT.COM.TW
誠信科技 / ADT Corp.
TEL : +886 3 3270910 #24
FAX : +886 3 3270892

"dward"
<dward@atcb.co 收件人： <ellis@adt.com.tw>
m> 副本抄送： "'Alan Lane ADT'"
<alan_lane@adt.com.tw>, <demi@adt.com.tw>,
2003/03/03 <Rennie@adt.com.tw>
09:58 AM 主旨： KA2DI-754 COMMENTS
請回信給
dward

HI Ellis
Thanks,
I guess I did not make my request clear. I understand that the manual says the expansion slot only works
with the 650 WLAN. But is this accomplished via software (i.e. it looks at the PCMCIA card plug and play
firmware and only activates the EUT operability for the expansion slot if the 650 and only the 650 card is
inserted) or is it done via hardware (i.e. only cards purchased from D-link for this specific application
and having a hardware selection capability built into the card and the EUT activate the expansion slot in
the EUT.

Also, what about the verification that both EUT and the WLAN expansion card wer operating during Radiated
Spurious emissions? Thanks Dennis

-----Original Message-----
From: ellis@adt.com.tw [mailto:ellis@adt.com.tw]
Sent: Sunday, March 02, 2003 5:27 PM
1

To: dward@atcb.com
Cc: Alan Lane ADT; demi@adt.com.tw; Rennie@adt.com.tw
Subject: 回信： Re: [Fwd: KA2DI-754 COMMENTS]

Dear Dennis,

Please see page 5 on the user manual.

Thanks and Best Regards.

吳佳鑫 / Ellis Wu
E-mail : Ellis@ADT.COM.TW
誠信科技 / ADT Corp.
TEL : +886 3 3270910 #24
FAX : +886 3 3270892

Dennis Ward

<dennis@yosemi 收件人： dward@atcb.com

te.net> 副本抄送： ellis@adt.com.tw,
Alan
Lane ADT
<alan_lane@adt.com.tw>

2003/03/02 主旨： Re: [Fwd: KA2DI-754
COMMENTS]
11:09 AM

請回信給

dward

Hi Ellis
I am about ready to issue the grant on this item, but I do not see in the manual where
the PCMCIA is a dedicated slot for use only with the 650 card. Also,
Please verify
that the 650 was operational during spurious emissions testing. ONce these are confirmed, I can issue the
grant. thanks Dennis

Dennis Ward wrote:
2

> I have not heard anything on this issue from you. I have attached the
> original request for in formation. thanks
> Dennis
>
>
------------------------------------------------------------------------
>
> Subject: KA2DI-754 COMMENTS
> Date: Thu, 30 Jan 2003 21:30:04 -0800
> From: Dennis Ward <dennis@yosemite.net>
> Reply-To: dward@atcb.com
> To: Ellis - ADT <ellis@adt.com.tw>
> References: <3E3982F4.B2E6A9FC@yosemite.net>
>
> Hi Ellis
> attached are the comments on this application.
> Thanks
> Dennis
>
>
------------------------------------------------------------------------
> Name: 1-30-03 KA2DI-754 ATCB
Comments.pdf
> 1-30-03 KA2DI-754 ATCB Comments.pdf Type: Acrobat (application/pdf)
> Encoding: base64

3

Document Created: 2003-03-02 20:54:38
Document Modified: 2003-03-02 20:54:38

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC