(DCS-930_A2)RF Exp

FCC ID: KA2CS930LA2

RF Exposure Info

Download: PDF
FCCID_1681720

Report No. 122070R-RF-US-Exp RF Exposure Evaluation declaration Product Name ： Wireless N Home Networks Camera Model No. ： DCS-930_A2, DCS-930L_A2 FCC ID. ： KA2CS930LA2 Applicant : D-Link Corporation Address : No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C. Date of Receipt : 2012/02/01 Date of Declaration : 2012/04/12 Report No. : 122070R-RF-US-Exp Report Version : V1.0 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of QuieTek Corporation. Page: 1 of 4

Report No. 122070R-RF-US-Exp 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time 2 (MHz) Strength (V/m) Strength (A/m) (mW/cm ) (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18℃and 78％ RH. Page: 2 of 4

Report No. 122070R-RF-US-Exp 1.3. Test Result of RF Exposure Evaluation Product Wireless N Home Networks Camera Test Mode Mode 1: Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.1dBi or 1.622 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11b WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 1 2412 53.3335 0.01721 6 2437 55.8470 0.01802 11 2462 52.9663 0.01709 IEEE 802.11g WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 1 2412 180.3018 0.05817 6 2437 163.6817 0.05281 11 2462 160.6941 0.05185 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 3 of 4

Report No. 122070R-RF-US-Exp Product Wireless N Home Networks Camera Test Mode Mode 1: Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.1dBi or 1.622 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11n (20MHz) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 1 2412 190.9853 0.06162 6 2437 170.6082 0.05505 11 2462 180.3018 0.05817 IEEE 802.11n (40M) WLAN Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 3 2422 225.9436 0.07290 6 2437 226.9865 0.07324 9 2452 242.6610 0.07829 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 4 of 4


Document Created: 2012-04-17 10:30:16
Document Modified: 2012-04-17 10:30:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC