Test Report Co-Location

FCC ID: KA2CS8525LHA1

Test Report

Download: PDF
FCCID_3793277

Supplemental “Transmit Simultaneously” Test Report Report No.: RF180131E09-1 FCC ID: KA2CS8525LHA1 Test Model: DCS-8525LH Received Date: Jan. 31, 2018 Test Date: Feb. 08 to 23, 2018 Issued Date: Mar. 15, 2018 Applicant: D-Link Corporation Address: No.289, Xinhu 3rd Rd., Neihu District, Tapei City 11494, Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180131E09-1 Page No. 1 / 27 Report Format Version: 6.1.1 Reference No.:

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.1.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 8 3.2 Description of Support Units ............................................................................................................. 10 3.2.1 Configuration of System under Test ................................................................................................... 11 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 15 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 16 4.1.6 EUT Operating Conditions................................................................................................................. 17 4.1.7 Test Results ....................................................................................................................................... 18 4.2 Conducted Emission Measurement .................................................................................................. 20 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 20 4.2.2 Test Instruments ................................................................................................................................ 20 4.2.3 Test Procedures ................................................................................................................................. 21 4.2.4 Deviation from Test Standard ............................................................................................................ 21 4.2.5 Test Setup .......................................................................................................................................... 21 4.2.6 EUT Operating Conditions................................................................................................................. 21 4.2.7 Test Results ....................................................................................................................................... 22 4.3 Conducted Out of Band Emission Measurement .............................................................................. 24 4.3.1 Limits of Conducted Out of Band Emission Measurement................................................................ 24 4.3.2 Test Setup .......................................................................................................................................... 24 4.3.3 Test Instruments ................................................................................................................................ 24 4.3.4 Test Procedures ................................................................................................................................. 24 4.3.5 Deviation from Test Standard ............................................................................................................ 24 4.3.6 EUT Operating Conditions................................................................................................................. 24 4.3.7 Test Results ....................................................................................................................................... 24 5 Pictures of Test Arrangements .......................................................................................................... 26 Appendix – Information on the Testing Laboratories ................................................................................ 27 Report No.: RF180131E09-1 Page No. 2 / 27 Report Format Version: 6.1.1 Reference No.:

Release Control Record Issue No. Description Date Issued RF180131E09-1 Original release. Mar. 15, 2018 Report No.: RF180131E09-1 Page No. 3 / 27 Report Format Version: 6.1.1 Reference No.:

1 Certificate of Conformity Product: Full HD Pan & Tilt Wi-Fi Camera Brand: D-Link Test Model: DCS-8525LH Sample Status: ENGINEERING SAMPLE Applicant: D-Link Corporation Test Date: Feb. 08 to 23, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Mar. 15, 2018 Phoenix Huang / Specialist Approved by : , Date: Mar. 15, 2018 May Chen / Manager Report No.: RF180131E09-1 Page No. 4 / 27 Report Format Version: 6.1.1 Reference No.:

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C, E (SECTION 15.247, 15.407) FCC Test Item Result Remarks Clause Meet the requirement of limit. AC Power Conducted 15.207 PASS Minimum passing margin is -3.12dB at Emission 0.39219MHz. 15.205 / 15.209 / Radiated Emissions and Band Meet the requirement of limit. Edge Measurement PASS Minimum passing margin is -2.1dB at 15.247(d) 63.42MHz. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 1.84 dB Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.33 dB 1GHz ~ 6GHz 5.10 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 4.85 dB 18GHz ~ 40GHz 5.24 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF180131E09-1 Page No. 5 / 27 Report Format Version: 6.1.1 Reference No.:

3 General Information 3.1 General Description of EUT Product Full HD Pan & Tilt Wi-Fi Camera Brand D-Link Test Model DCS-8525LH Status of EUT ENGINEERING SAMPLE Power Supply Rating 5Vdc from power adapter For WLAN CCK, DQPSK, DBPSK for DSSS Modulation Type 64QAM, 16QAM, QPSK, BPSK for OFDM For BT-LE: GFSK For WLAN: DSSS, OFDM Modulation Technology For BT-LE: DTS For WLAN 802.11b: up to 11Mbps Transfer Rate 802.11g: up to 54Mbps 802.11n: up to 72.2Mbps For BT-LE: 1Mbps For WLAN: 2.412 ~ 2.462GHz Operating Frequency For BT-LE: 2.402 ~ 2.480GHz For WLAN Number of Channel 802.11b, 802.11g, 802.11n (HT20): 11 For BT-LE: 40 For WLAN: 418.794mW Output Power For BT-LE: 14.322mW Antenna Type Refer to Note Antenna Connector Refer to Note Adapter x1, Accessory Device SD Card x1, Wall-mounted stand x1 Data Cable Supplied Ethernet Cable x1 (Unshielded, 1m) Note: 1. For BT-LE the Maximum power was refer to the FCC test report (Report No.: RF180131E09B) 2. Simultaneously transmission condition. Condition Technology WLAN Bluetooth 3. The EUT must be supplied with a power adapter and following table: Brand Model No. Spec. Input: 100-240Vac, 0.5A, 50/60Hz Amigo AMS135-0502000FU Output: 5Vdc, 2A DC output cable (Unshielded, 3m) 4. The antenna provided to the EUT, please refer to the following table: Antenna Net Cable Frequency range Connecter Brand Name Model No. Gain Antenna Type Length (GHz ~ GHz) Type (dBi) (mm) HL TECHNOLOGY 533080193409G 1.91 2.4~2.4835 Dipole i-pex(MHF) 70 Report No.: RF180131E09-1 Page No. 6 / 27 Report Format Version: 6.1.1 Reference No.:

5. The EUT incorporates a SISO function. MODULATION MODE DATA RATE (MCS) TX & RX CONFIGURATION 802.11b 1 ~ 11Mbps 1TX 1RX 802.11g 6 ~ 54Mbps 1TX 1RX 802.11n (HT20) MCS 0~7 1TX 1RX 6. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF180131E09-1 Page No. 7 / 27 Report Format Version: 6.1.1 Reference No.:

3.1.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC OB - √ √ √ √ - RE1G: Radiated Emission above 1GHz & Where RE<1G: Radiated Emission below 1GHz Bandedge Measurement PLC: Power Line Conducted Emission OB: Conducted Out-Band Emission Measurement Note: The EUT had been pre-tested on the positioned of each 2 axis. The worst case was found when positioned on Y-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE MODULATION MODE TESTED CHANNEL MODULATION TYPE CHANNEL TECHNOLOGY 802.11g 1 to 11 6 OFDM BPSK + BT-LE 0 to 39 19 DTS GFSK Radiated Emission Test (Below 1GHz): Following channel(s) was (were) selected for the final test as listed below. AVAILABLE MODULATION MODE TESTED CHANNEL MODULATION TYPE CHANNEL TECHNOLOGY 802.11g 1 to 11 6 OFDM BPSK + BT-LE 0 to 39 19 DTS GFSK Power Line Conducted Emission Test: Following channel(s) was (were) selected for the final test as listed below. AVAILABLE MODULATION MODE TESTED CHANNEL MODULATION TYPE CHANNEL TECHNOLOGY 802.11g 1 to 11 6 OFDM BPSK + BT-LE 0 to 39 19 DTS GFSK Report No.: RF180131E09-1 Page No. 8 / 27 Report Format Version: 6.1.1 Reference No.:

Conducted Out-Band Emission Measurement: Following channel(s) was (were) selected for the final test as listed below. AVAILABLE MODULATION MODE TESTED CHANNEL MODULATION TYPE CHANNEL TECHNOLOGY 802.11g 1 to 11 6 OFDM BPSK + BT-LE 0 to 39 19 DTS GFSK Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE1G 22deg. C, 68%RH 120Vac, 60Hz Steven Chiang RE<1G 22deg. C, 67%RH 120Vac, 60Hz Robert Cheng PLC 25deg. C, 75%RH 120Vac, 60Hz Andy Ho OB 25deg. C, 60%RH 120Vac, 60Hz Jyunchun Lin Report No.: RF180131E09-1 Page No. 9 / 27 Report Format Version: 6.1.1 Reference No.:

3.2 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Micro SD Card Transcend 16GB NA NA Supplied by client B. Laptop DELL E5430 DM1SKV1 FCC DoC Provided by Lab C. Laptop DELL E5430 GM1SKV1 FCC DoC Provided by Lab Note: 1. All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. DC Cable 1 3 No 0 Supplied by client 2. RJ-45 Cable 1 10 No 0 Provided by Lab 3. Console Cable 1 0.5 No 0 Supplied by client (for RF Setup) 4. USB Cable 1 1.2 Yes 1 Provided by Lab 5. RJ-45 Cable 1 3 No 0 Provided by Lab Note: The core(s) is(are) originally attached to the cable(s). Report No.: RF180131E09-1 Page No. 10 / 27 Report Format Version: 6.1.1 Reference No.:

3.2.1 Configuration of System under Test For Conducted emission test: Report No.: RF180131E09-1 Page No. 11 / 27 Report Format Version: 6.1.1 Reference No.:

For Radiated emission test: Report No.: RF180131E09-1 Page No. 12 / 27 Report Format Version: 6.1.1 Reference No.:

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF180131E09-1 Page No. 13 / 27 Report Format Version: 6.1.1 Reference No.:

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY54450088 July 08, 2017 July 07, 2018 Keysight (*) Loop Antenna HLA 6121 45745 May 19, 2017 May 18, 2018 TESEQ Pre-Amplifier ZFL-1000VH2 AMP-ZFL-01 Nov. 09, 2017 Nov. 08, 2018 Mini-Circuits B Trilog Broadband Antenna VULB 9168 9168-406 Nov. 29, 2017 Nov. 28, 2018 SCHWARZBECK 966-4-1 RF Cable 8D 966-4-2 Apr. 01, 2017 Mar. 31, 2018 966-4-3 Fixed attenuator UNAT-5+ PAD-3m-4-01 Oct. 03, 2017 Oct. 02, 2018 Mini-Circuits Horn_Antenna BBHA 9120D 9120D-783 Dec. 12, 2017 Dec. 11, 2018 SCHWARZBECK Pre-Amplifier EMC12630SE 980385 Jan. 29, 2018 Jan. 28, 2019 EMCI EMC104-SM- SM-1200 160923 Jan. 29, 2018 Jan. 28, 2019 EMC104-SM- RF Cable 150318 Jan. 29, 2018 Jan. 28, 2019 SM-2000 150321 Jan. 29, 2018 Jan. 28, 2019 EMC104-SM- SM-5000 Pre-Amplifier EMC184045S 980387 Jan. 29, 2018 Jan. 28, 2019 EMCI E Horn_Antenna BBHA 9170 BBHA9170608 Dec. 14, 2017 Dec. 13, 2018 SCHWARZBECK EMC102-KM- RF Cable 160925 Jan. 29, 2018 Jan. 28, 2019 KM-1200 ADT_Radiated Software NA NA NA _V8.7.08 Antenna Tower & Turn Table MF-7802 MF780208410 NA NA Max-Full Boresight Antenna Fixture FBA-01 FBA-SIP02 NA NA Spectrum Analyzer E4446A MY48250254 Nov. 21, 2017 Nov. 20, 2018 Agilent Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in 966 Chamber No. 4. 4. The CANADA Site Registration No. is 20331-2 5. Loop antenna was used for all emissions below 30 MHz. 6. Tested Date: Feb. 22 to 23, 2018 Report No.: RF180131E09-1 Page No. 14 / 27 Report Format Version: 6.1.1 Reference No.:

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Both X and Y axes of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. Report No.: RF180131E09-1 Page No. 15 / 27 Report Format Version: 6.1.1 Reference No.:

4.1.4 Deviation from Test Standard No deviation. 4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF180131E09-1 Page No. 16 / 27 Report Format Version: 6.1.1 Reference No.:

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Connected the EUT with the Laptop which is placed on remote site. b. Controlling software (MPTool_Ver:30.12.20150826) has been activated to set the EUT on specific status. Report No.: RF180131E09-1 Page No. 17 / 27 Report Format Version: 6.1.1 Reference No.:

4.1.7 Test Results Above 1GHz Data DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 4874.00 44.3 PK 74.0 -29.7 1.76 H 289 41.4 2.9 2 4874.00 39.2 AV 54.0 -14.8 1.76 H 289 36.3 2.9 3 4880.00 37.8 PK 74.0 -36.2 1.45 H 168 34.9 2.9 4 4880.00 30.0 AV 54.0 -24.0 1.45 H 168 27.1 2.9 5 7311.00 42.5 PK 74.0 -31.5 1.59 H 122 33.2 9.3 6 7311.00 33.4 AV 54.0 -20.6 1.59 H 122 24.1 9.3 7 7320.00 44.5 PK 74.0 -29.5 2.53 H 243 35.1 9.4 8 7320.00 34.5 AV 54.0 -19.5 2.53 H 243 25.1 9.4 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 4874.00 48.7 PK 74.0 -25.3 1.49 V 173 45.8 2.9 2 4874.00 42.9 AV 54.0 -11.1 1.49 V 173 40.0 2.9 3 4880.00 40.0 PK 74.0 -34.0 1.37 V 291 37.1 2.9 4 4880.00 33.5 AV 54.0 -20.5 1.37 V 291 30.6 2.9 5 7311.00 44.3 PK 74.0 -29.7 1.77 V 338 35.0 9.3 6 7311.00 35.3 AV 54.0 -18.7 1.77 V 338 26.0 9.3 7 7320.00 43.5 PK 74.0 -30.5 1.89 V 224 34.1 9.4 8 7320.00 33.9 AV 54.0 -20.1 1.89 V 224 24.5 9.4 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF180131E09-1 Page No. 18 / 27 Report Format Version: 6.1.1 Reference No.:

Below 1GHz Data: DETECTOR FREQUENCY RANGE 9kHz ~ 1GHz Quasi-Peak (QP) FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 58.88 35.2 QP 40.0 -4.8 1.65 H 304 43.3 -8.1 2 131.82 41.1 QP 43.5 -2.4 1.75 H 166 50.0 -8.9 3 248.11 41.0 QP 46.0 -5.0 1.42 H 211 50.1 -9.1 4 311.85 37.6 QP 46.0 -8.4 1.65 H 99 44.3 -6.7 5 648.12 34.6 QP 46.0 -11.4 1.44 H 88 33.7 0.9 6 900.12 41.0 QP 46.0 -5.0 1.88 H 88 36.6 4.4 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 63.42 37.9 QP 40.0 -2.1 1.45 V 165 46.7 -8.8 2 131.72 36.0 QP 43.5 -7.5 1.77 V 165 44.9 -8.9 3 166.65 39.2 QP 43.5 -4.3 1.77 V 88 47.3 -8.1 4 241.26 40.2 QP 46.0 -5.8 1.65 V 244 49.6 -9.4 5 288.81 39.4 QP 46.0 -6.6 1.66 V 345 46.9 -7.5 6 900.65 36.5 QP 46.0 -9.5 1.25 V 44 32.0 4.5 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF180131E09-1 Page No. 19 / 27 Report Format Version: 6.1.1 Reference No.:

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 847124/029 Nov. 01, 2017 Oct. 31, 2018 R&S Line-Impedance Stabilization Network ESH3-Z5 848773/004 Nov. 15, 2017 Nov. 14, 2018 (for EUT) R&S Line-Impedance Stabilization Network ENV216 100072 June 03, 2017 June 02, 2018 (for Peripheral) R&S 50 ohms Terminator N/A EMC-02 Sep. 22, 2017 Sep. 21, 2018 RF Cable 5D-FB COCCAB-001 Sep. 29, 2017 Sep. 28, 2018 10 dB PAD HAT-10+ CONATT-004 June 18, 2017 June 17, 2018 Mini-Circuits Software BVADT_Cond_ NA NA NA BVADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Conduction 1. 3 Tested Date: Feb. 13, 2018 Report No.: RF180131E09-1 Page No. 20 / 27 Report Format Version: 6.1.1 Reference No.:

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver EUT 40cm 80cm LISN Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF180131E09-1 Page No. 21 / 27 Report Format Version: 6.1.1 Reference No.:

4.2.7 Test Results Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 10.14 34.35 23.81 44.49 33.95 66.00 56.00 -21.51 -22.05 2 0.37656 10.19 38.14 28.25 48.33 38.44 58.35 48.35 -10.02 -9.91 3 0.39219 10.20 39.18 34.70 49.38 44.90 58.02 48.02 -8.64 -3.12 4 0.97031 10.25 30.62 25.53 40.87 35.78 56.00 46.00 -15.13 -10.22 5 2.16016 10.31 29.20 22.66 39.51 32.97 56.00 46.00 -16.49 -13.03 6 3.20313 10.38 29.29 22.11 39.67 32.49 56.00 46.00 -16.33 -13.51 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF180131E09-1 Page No. 22 / 27 Report Format Version: 6.1.1 Reference No.:

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 10.05 34.26 21.42 44.31 31.47 66.00 56.00 -21.69 -24.53 2 0.37656 10.09 33.83 22.32 43.92 32.41 58.35 48.35 -14.43 -15.94 3 0.39219 10.10 33.87 29.84 43.97 39.94 58.02 48.02 -14.05 -8.08 4 0.97422 10.12 26.17 20.01 36.29 30.13 56.00 46.00 -19.71 -15.87 5 4.56641 10.32 25.16 17.77 35.48 28.09 56.00 46.00 -20.52 -17.91 6 6.91406 10.46 25.46 18.46 35.92 28.92 60.00 50.00 -24.08 -21.08 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF180131E09-1 Page No. 23 / 27 Report Format Version: 6.1.1 Reference No.:

4.3 Conducted Out of Band Emission Measurement 4.3.1 Limits of Conducted Out of Band Emission Measurement Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.3.2 Test Setup Spectrum EUT Attenuator Analyzer 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedures MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. 4.3.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF180131E09-1 Page No. 24 / 27 Report Format Version: 6.1.1 Reference No.:

2.4GHz_802.11g CH6 + BT-LE CH19 Report No.: RF180131E09-1 Page No. 25 / 27 Report Format Version: 6.1.1 Reference No.:

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF180131E09-1 Page No. 26 / 27 Report Format Version: 6.1.1 Reference No.:

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF180131E09-1 Page No. 27 / 27 Report Format Version: 6.1.1 Reference No.:


Document Created: 2018-03-26 12:38:21
Document Modified: 2018-03-26 12:38:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC