Test Report (BT).pdf

FCC ID: KA2CHG021A1

Test Report

Download: PDF
FCCID_2470264

FCC TEST REPORT (15.247_BLUETOOTH) REPORT NO.: RF140729C08A-1 MODEL NO.: DCH-G021 FCC ID: KA2CHG021A1 RECEIVED: Oct. 24, 2014 TESTED: Oct. 29 ~ Nov. 03, 2014 ISSUED: Nov. 04, 2014 APPLICANT: D-LINK CORPORATION ADDRESS: 17595 Mt. Hermann, Fountain Valley, CA 92708, U.S.A. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF140729C08A-1 1 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

Table of Contents RELEASE CONTROL RECORD ..............................................................................................................3 1. CERTIFICATION ...........................................................................................................................4 2. SUMMARY OF TEST RESULTS ..................................................................................................5 2.1 MEASUREMENT UNCERTAINTY................................................................................................5 3. GENERAL INFORMATION ...........................................................................................................6 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................6 3.2 DESCRIPTION OF TEST MODES ...............................................................................................7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ...............................................8 3.3 DESCRIPTION OF SUPPORT UNITS .........................................................................................9 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ..........................................................................9 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................10 4. TEST TYPES AND RESULTS .................................................................................................... 11 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................... 11 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................. 11 4.1.2 TEST INSTRUMENTS ................................................................................................................12 4.1.3 TEST PROCEDURES ................................................................................................................13 4.1.4 DEVIATION FROM TEST STANDARD ......................................................................................13 4.1.5 TEST SETUP ..............................................................................................................................14 4.1.6 EUT OPERATING CONDITIONS ...............................................................................................14 4.1.7 TEST RESULTS .........................................................................................................................15 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................16 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ..........................................................16 4.2.2 TEST INSTRUMENTS ................................................................................................................16 4.2.3 TEST PROCEDURES ................................................................................................................17 4.2.4 DEVIATION FROM TEST STANDARD ......................................................................................17 4.2.5 TEST SETUP ..............................................................................................................................18 4.2.6 EUT OPERATING CONDITIONS ...............................................................................................18 4.2.7 TEST RESULTS .........................................................................................................................19 5. PHOTOGRAPHS OF THE TEST CONFIGURATION.................................................................21 6. INFORMATION ON THE TESTING LABORATORIES ...............................................................22 7. APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB .......................................................................................................................23 Report No.: RF140729C08A-1 2 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF140729C08A-1 Original release. Nov. 04, 2014 Report No.: RF140729C08A-1 3 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

1. CERTIFICATION PRODUCT: Wireless smart hub MODEL NO.: DCH-G021 BRAND: D-Link APPLICANT: D-LINK CORPORATION TESTED: Oct. 29 ~ Nov. 03, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.247) This report is issued as a supplementary report of RF140729C08-1. This report shall be used combined together with its original report. PREPARED BY : , DATE : Nov. 04, 2014 Polly Chien / Specialist APPROVED BY : , DATE : Nov. 04, 2014 Ken Liu / Senior Manager NOTE: Test items for conducted emission and radiated emission below 1GHz test were performed for this addendum. Other testing data refer to original report. Report No.: RF140729C08A-1 4 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD TEST TYPE AND LIMIT RESULT REMARK SECTION Meet the requirement of limit. 15.207 AC Power Conducted Emission PASS Minimum passing margin is -17.86dB at 0.59158MHz. 15.247(a)(1) (iii) Number of Hopping Frequency Used N/A Refer to NOTE below 15.247(a)(1) (iii) Dwell Time on Each Channel N/A Refer to NOTE below 1. Hopping Channel Separation 2. Spectrum Bandwidth of a 15.247(a)(1) N/A Refer to NOTE below Frequency Hopping Sequence Spread Spectrum System 15.247(b) Maximum Peak Output Power N/A Refer to NOTE below Meet the requirement of limit. 15.205 & 209 Radiated Emissions PASS Minimum passing margin is -4.2dB at 43.48MHz. 15.247(d) Band Edge Measurement N/A Refer to NOTE below 15.247(d) Antenna Port Emission N/A Refer to NOTE below 15.203 Antenna Requirement PASS No antenna connector is used. NOTE: Test items for conducted emission and radiated emission below 1GHz test were performed for this addendum. Other testing data refer to original report. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENT FREQUENCY UNCERTAINTY Conducted emission 150kHz ~ 30MHz 2.44 dB 30MHz ~ 200MHz 3.59 dB Radiated emissions 200MHz ~1000MHz 3.60 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Report No.: RF140729C08A-1 5 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT Wireless smart hub MODEL NO. DCH-G021 POWER SUPPLY 12Vdc (Adapter) MODULATION TYPE GFSK, π/4-DQPSK, 8DPSK MODULATION FHSS TECHNOLOGY TRANSFER RATE 1/2/3Mbps OPERATING 2402 ~ 2480MHz FREQUENCY NUMBER OF 79 CHANNEL MAX. OUTPUT POWER 9.016mW ANTENNA TYPE PCB antenna with 2.10dBi gain ANTENNA NA CONNECTOR I/O PORTS Refer to user’s manual DATA CABLE NA ACCESSORY DEVICES Adapter NOTE: 1. This is a supplementary report of RF140729C08-1. This report shall be combined together with its original report. 2. This report is prepared for FCC class II permissive change. The difference compared with the original report is adding one adapter. Therefore, test items for conducted emission and radiated emission below 1GHz test had been re-tested and presented in this report. 3. The EUT consumes power from the following adapters. Original adapter BRAND: JENTEC TECHNOLOGY CO., LTD. MODEL: CH1812-B INPUT: 100-240Vac, 50-60Hz, 0.5A OUTPUT: 12Vdc, 1.5A POWER LINE: 1.55m cable with 1 core attached on adapter New adapter BRAND: D-Link MODEL: AMS3-1201500FU INPUT: 100-240Vac, 50/60Hz, 0.5A/45VA OUTPUT: 12Vdc, 1.5A POWER LINE: 1.2m cable without core attached on adapter 4. The above EUT information is declared by manufacturer and for more detailed feature description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF140729C08A-1 6 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

3.2 DESCRIPTION OF TEST MODES 79 channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHz) (MHz) (MHz) (MHz) 0 2402 20 2422 40 2442 60 2462 1 2403 21 2423 41 2443 61 2463 2 2404 22 2424 42 2444 62 2464 3 2405 23 2425 43 2445 63 2465 4 2406 24 2426 44 2446 64 2466 5 2407 25 2427 45 2447 65 2467 6 2408 26 2428 46 2448 66 2468 7 2409 27 2429 47 2449 67 2469 8 2410 28 2430 48 2450 68 2470 9 2411 29 2431 49 2451 69 2471 10 2412 30 2432 50 2452 70 2472 11 2413 31 2433 51 2453 71 2473 12 2414 32 2434 52 2454 72 2474 13 2415 33 2435 53 2455 73 2475 14 2416 34 2436 54 2456 74 2476 15 2417 35 2437 55 2457 75 2477 16 2418 36 2438 56 2458 76 2478 17 2419 37 2439 57 2459 77 2479 18 2420 38 2440 58 2460 78 2480 19 2421 39 2441 59 2461 Report No.: RF140729C08A-1 7 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE<1G PLC - √ √ EUT + new adapter Where RE1G: Radiated Emission above 1GHz PLC: Power Line Conducted Emission NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Y-plane. RADIATED EMISSION TEST (BELOW 1 GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, antenna ports (if EUT with antenna diversity architecture) and packet type. Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION MODULATION CONFIGURE PACKET TYPE CHANNEL CHANNEL TECHNOLOGY TYPE MODE - 0 to 78 0 FHSS 8DPSK DH5 POWER LINE CONDUCTED EMISSION: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, antenna ports (if EUT with antenna diversity architecture) and packet type. Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION MODULATION CONFIGURE PACKET TYPE CHANNEL CHANNEL TECHNOLOGY TYPE MODE - 0 to 78 0 FHSS 8DPSK DH5 TEST CONDITION: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE<1G 24deg. C, 66%RH 120Vac, 60Hz Alan Wu PLC 24deg. C, 64%RH 120Vac, 60Hz Match Tsui Report No.: RF140729C08A-1 8 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID CN-0XM006-48643 1 NOTEBOOK DELL D531 QDS-BRCM1020 -81U-2610 2 USB DISK SANDISK SDCZ6-1024 NA NA NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 10m RJ45 UTP cable 2 NA NOTE: 1. All power cords of the above support units are non shielded (1.8m). 2. Items 1 acted as communication partners to transfer data. 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST USB Disk EUT (Power from adapter) *Test table RJ45 UTP cable Notebook *Kept in a remote area Report No.: RF140729C08A-1 9 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) FCC Public Notice DA 00-705 ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. NOTE: The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF140729C08A-1 10 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

4. TEST TYPES AND RESULTS 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: FIELD STRENGTH MEASUREMENT DISTANCE FREQUENCIES (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF140729C08A-1 11 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

4.1.2 TEST INSTRUMENTS DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESCI 100424 Oct. 06, 2014 Oct. 05, 2015 ROHDE & SCHWARZ Spectrum Analyzer FSU 43 100115 Dec. 18, 2013 Dec. 17, 2014 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-155 Feb. 26, 2014 Feb. 25, 2015 SCHWARZBECK HORN Antenna BBHA 9120D 9120D-404 Jan. 05, 2014 Jan. 04, 2015 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Feb. 17, 2014 Feb. 16, 2015 SCHWARZBECK Preamplifier 8449B 3008A01961 Oct. 18, 2014 Oct. 17, 2015 Agilent Preamplifier 8447D 2944A10738 Oct. 18, 2014 Oct. 17, 2015 Agilent RF signal cable SUCOFLEX 104 309220/4 Aug. 09, 2014 Aug. 08, 2015 HUBER+SUHNNER RF signal cable SUCOFLEX 104 250724/4 Aug. 09, 2014 Aug. 08, 2015 HUBER+SUHNNER RF signal cable SUCOFLEX 104 295012/4 Aug. 09, 2014 Aug. 08, 2015 HUBER+SUHNNER Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.4 Antenna Tower MA 4000 010303 NA NA inn-co GmbH Antenna Tower Controller CO2000 019303 NA NA inn-co GmbH Turn Table TT100. TT93021704 NA NA BV ADT Turn Table Controller SC100. SC93021704 NA NA BV ADT NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 4. 3. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Site Registration No. is 460141. 5. The IC Site Registration No. is IC7450F-4. Report No.: RF140729C08A-1 12 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

4.1.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF140729C08A-1 13 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

4.1.5 TEST SETUP Frequency range 30MHz~1GHz For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT OPERATING CONDITIONS a. Placed the EUT on the testing table. b. Prepared notebook to act as communication partner and placed it outside of testing area. c. The communication partner connected with EUT via a RJ45 cable and ran a test program (provided by manufacturer) to enable EUT under transmission condition continuously at specific channel frequency. d. The necessary accessories enable the system in full functions. Report No.: RF140729C08A-1 14 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

4.1.7 TEST RESULTS BELOW 1GHz WORST-CASE DATA：8DPSK EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 0 FREQUENCY RANGE Below 1000MHz DETECTOR INPUT POWER 120Vac, 60 Hz Quasi-Peak FUNCTION ENVIRONMENTAL 24deg. C, 66%RH TESTED BY Alan Wu CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 53.18 27.3 QP 40.0 -12.7 1.49 H 201 41.30 -14.00 2 107.52 36.9 QP 43.5 -6.6 1.49 H 86 54.30 -17.40 3 142.44 33.6 QP 43.5 -9.9 1.49 H 228 47.70 -14.10 4 204.54 27.9 QP 43.5 -15.6 1.49 H 292 44.50 -16.60 5 524.70 27.2 QP 46.0 -18.8 1.75 H 243 35.70 -8.50 6 757.55 31.1 QP 46.0 -14.9 1.00 H 235 34.70 -3.60 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 43.48 35.8 QP 40.0 -4.2 1.50 V 169 50.10 -14.30 2 107.52 33.7 QP 43.5 -9.8 1.00 V 34 51.10 -17.40 3 140.50 33.2 QP 43.5 -10.3 1.00 V 63 47.40 -14.20 4 524.70 24.7 QP 46.0 -21.3 3.00 V 161 33.20 -8.50 5 749.79 26.5 QP 46.0 -19.5 1.50 V 223 30.10 -3.60 6 775.01 27.2 QP 46.0 -18.8 1.00 V 163 30.50 -3.30 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF140729C08A-1 15 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

4.2 CONDUCTED EMISSION MEASUREMENT 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15 ~ 0.5 66 to 56 56 to 46 0.5 ~ 5 56 46 5 ~ 30 60 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.2.2 TEST INSTRUMENTS DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESCI 100612 Sep. 30, 2014 Sep. 29, 2015 ROHDE & SCHWARZ RF signal cable 5D-FB Cable-HYC01-01 Dec. 27, 2013 Dec. 26, 2014 Woken LISN ROHDE & SCHWARZ ESH3-Z5 835239/001 Feb. 13, 2014 Feb. 12, 2015 (EUT) LISN ROHDE & SCHWARZ ESH3-Z5 100311 Jul. 21, 2014 Jul. 20, 2015 (Peripheral) Software BV ADT_Cond_ NA NA NA ADT V7.3.7.3 Notes: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 1. 3. The VCCI Site Registration No. is C-2040. Report No.: RF140729C08A-1 16 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

4.2.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF140729C08A-1 17 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

4.2.5 TEST SETUP Ve r tic a l G ro u n d R e fe r e n c e P la n e Te s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n ta l G ro u n d R e fe r e n c e P la n e N o te : 1 .S u p p o rt u n its w e r e c o n n e c te d t o s e c o n d L IS N . 2 .B o th o f L IS N s ( A M N ) a r e 8 0 c m fr o m E U T a n d a t le a s t 8 0 fr o m o th e r u n its a n d o th e r m e ta l p la n e s For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6. Report No.: RF140729C08A-1 18 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

4.2.7 TEST RESULTS CONDUCTED WORST—CASE DATA : SDPSK PHASE Line 1 6dB BANDWIDTH OKHz Freq. Corr. Reading Value |Emission Level Limit Margin No Factor_|__ [dB (uV)] [dB (uV)] [dB (uV)] (dB) MHz] (4p) or av. or av. or av. or ay. 1 0.17737 0.07 33.82 20.60 33.89 20.73 64.61 54.61 —30.71 —33.87 2 0.59158 0.09 37.44 28.05 37.53 28.14 56.00 46.00 —18.47 —17.86 3 1.16660 0.12 26.62 18.49 26.74 18.61 56.00 46.00 —29.26 —27.39 4 1.67099 0.14 24.23 16.29 24.37 16.43 56.00 46.00 —31.63 —29.57 5 9.50663 0.49 31.36 24.79 31.85 25.28 60.00 50.00 —28.15 —24.72 6 24.58359 1.18 23.27 17.85 24.45 19.03 60.00 50.00 —35.55 —30.97 REMARKS: 1. Q.P. and AV. are abbreviations of quasi—peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level— Limit value 4. Correction factor= Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value douy PK ace [~~ or mt |.~~ C umt w ns tho toho mahbe mie Report No.: RF140720CO8A—1 18 o23 Report Format Version 5.0.0 Reference No.: 141024C19

PHASE Line 2 6dB BANDWIDTH OKHz Freq. Corr. Reading Value |Emission Level Limit Margin No Factor_|__ [dB (uV)] [dB (uV)] [dB (uV)] (dB) MHz] (4p) or av. or av. or av. or ay. 1 018122 0.05 33.37 2056 33.42 20.61 64.43 54.43 —31.01 —33.82 2 0.57620 0.08 37.91 2747 37.99 27.55 56.00 46.00 —18.01 —18.45 3 1.06885 0.09 2315 15.36 23.24 15.45 56.00 46.00 —32.76 —30.55 4 2406088 0.16 23.72 1718 23.88 17.34 56.00 46.00 —32.12 —28.66 5 9. 11172 0.41 30.92 2440 31.33 24.81 60.00 50.00 —28.67 —25.19 6 25.81524 1.04 24.05 1795 25.09 18.99 60.00 50.00 —34.91 —31.01 REMARKS: 1. Q.P. and AV. are abbreviations of quasi—peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level— Limit value 4. Correction factor= Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value douy P Tace [~~ ar umt ~~ Et limt w ns tho toho mahbe mie Report No.: RF140720CO8A—1 20 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF140729C08A-1 21 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF/Telecom Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Lab: Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. Report No.: RF140729C08A-1 22 of 23 Report Format Version 5.0.0 Reference No.: 141024C19

7. APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. --- END --- Report No.: RF140729C08A-1 23 of 23 Report Format Version 5.0.0 Reference No.: 141024C19


Document Created: 2019-10-30 10:37:16
Document Modified: 2019-10-30 10:37:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC