RF Exposure Info (MPE).pdf

FCC ID: KA2CHG021A1

RF Exposure Info

Download: PDF
FCCID_2470262

                                     RF EXPOSURE REPORT

                                    REPORT NO.: SA140729C08A
                                      MODEL NO.: DCH-G021
                                                FCC ID: KA2CHG021A1
                                         RECEIVED: Oct. 24, 2014
                                             TESTED: Oct. 29 ~ Nov. 03, 2014
                                              ISSUED: Nov. 04, 2014



                                 APPLICANT: D-LINK CORPORATION

                                    ADDRESS: 17595 Mt. Hermann, Fountain Valley, CA 92708,
                                             U.S.A.



                                  ISSUED BY: Bureau Veritas Consumer Products Services
                                             (H.K.) Ltd., Taoyuan Branch

                           LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist.,
                                        New Taipei City, Taiwan ( R.O.C. )

                        TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei
                                       Shan Hsiang, Taoyuan Hsien 333, Taiwan,
                                       R.O.C.




This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is
permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set
forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or
identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the
information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our
negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue
within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the
report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or
non-compliance to the specification.


 Report No.: SA140729C08A                                                    1 of 6                                         Report Format Version 5.0.1
 Reference No.: 141024C19


                                         TABLE OF CONTENTS

RELEASE CONTROL RECORD ................................................................................................ 3
1.       CERTIFICATION ............................................................................................................. 4
2.       RF EXPOSURE ............................................................................................................... 5
2.1      LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 5
2.2      MPE CALCULATION FORMULA .................................................................................... 5
2.3      CLASSIFICATION ........................................................................................................... 5
2.4      CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................. 6




Report No.: SA140729C08A                                        2 of 6                                   Report Format Version 5.0.1
Reference No.: 141024C19


                               RELEASE CONTROL RECORD

 ISSUE NO.             REASON FOR CHANGE                    DATE ISSUED
 SA140729C08A          Original release                     Nov. 04, 2014




Report No.: SA140729C08A                   3 of 6       Report Format Version 5.0.1
Reference No.: 141024C19


1. CERTIFICATION

                PRODUCT: Wireless smart hub
                    MODEL: DCH-G021
                    BRAND: D-Link
              APPLICANT: D-LINK CORPORATION
                   TESTED: Oct. 29 ~ Nov. 03, 2014
         TEST SAMPLE: ENGINEERING SAMPLE
            STANDARDS: FCC Part 2 (Section 2.1091)
                               KDB 447498 D03
                               IEEE C95.1



 The above equipment (Model: DCH-G021) has been tested by Bureau Veritas
 Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance
 with the requirement of the above standards. The test record, data evaluation &
 Equipment Under Test (EUT) configurations represented herein are true and accurate
 accounts of the measurements of the sample’s EMC characteristics under the
 conditions specified in this report.




   PREPARED BY             :                                    ,   DATE:     Nov. 04, 2014
                                Polly Chien / Specialist


   APPROVED BY             :                                    ,   DATE:     Nov. 04, 2014
                               Ken Liu / Senior Manager


   NOTE: This is a duplicate report of SA140729C08. The difference compared with the original report is
         adding one adapter. Due to no effect on any test item and we didn’t re-test.




Report No.: SA140729C08A                         4 of 6                         Report Format Version 5.0.1
Reference No.: 141024C19


2. RF EXPOSURE
2.1    LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)
   FREQUENCY               ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY    AVERAGE TIME
   RANGE (MHz)             STRENGTH (V/m) STRENGTH (A/m)   (mW/cm2)         (minutes)
                 LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE
      300-1500                  …               …           F/1500                30
   1500-100,000                 …               …             1.0                 30

F = Frequency in MHz


2.2    MPE CALCULATION FORMULA
Pd = (Pout*G) / (4*pi*r2)
where
Pd = power density in mW/cm2
Pout = output power to antenna in mW
G = gain of antenna in linear scale
Pi = 3.1416
R = distance between observation point and center of the radiator in cm


2.3    CLASSIFICATION

The antenna of this product, under normal use condition, is at least 20cm away from the
body of the user. So, this device is classified as Mobile Device.




Report No.: SA140729C08A                       5 of 6                Report Format Version 5.0.1
Reference No.: 141024C19


2.4     CALCULATION RESULT OF MAXIMUM CONDUCTED POWER


                                Conducted       Conducted       Antenna          Power
                  Frequency                                                                       Limit
      Mode                        power           power          Gain           Density
                  band (MHz)                                                                    (mW/cm2)
                                  (mW)            (dBm)           (dBi)        (mW/cm2)
  WiFi 2.4G       2412~2462       274.157          24.38           2.10           0.088              1
   BT EDR         2402~2480        9.016           9.55            2.10           0.003              1
      Zigbee     2405 ~ 2480       79.433          19.00           1.72           0.023              1

**Zigbee can transmit simultaneously with WLAN or BT but not WLAN and BT. WLAN and BT cannot
  transmit at the same time.

CONCULSION:
Zigbee can transmit simultaneously with WLAN or BT, the formula of the calculated MPE is:
CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1
CPD = Calculation power density
LPD = Limit of power density

Conducted power:
WiFi 2.4G + Zigbee = 274.157 + 79.433 = 353.59(mW)= 25.48(dBm) < 30(dBm)
BT EDR + Zigbee = 9.016 + 79.433 = 88.449(mW)= 19.47(dBm) < 30(dBm)

Power density:
WiFi 2.4G + Zigbee = 0.088 + 0.023 = 0.111
BT EDR + Zigbee = 0.003 + 0.023 = 0.026

Therefore the maximum calculations of the above situations are less than the “1” limit.




--- END ---




Report No.: SA140729C08A                           6 of 6                          Report Format Version 5.0.1
Reference No.: 141024C19



Document Created: 2019-11-02 14:16:23
Document Modified: 2019-11-02 14:16:23

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC