Users Manual

FCC ID: KA2BA1510PA1

Users Manual

Download: PDF
FCCID_3305705

Quick Installation Guide Business Cloud Access Point This document will guide you through the basic installation process for your D-Link Wireless AC Access Point. DBA-1510P Documentation is also available on the D-Link website

About This Instruction Guide Hardware Overview ENGLISH This installation guide provides instructions LEDs for installing the DBA-1510P Business Cloud Access Point on your network. For additional information about how to use the DBA-1510P, please see the User’s Manual which is available from the D-Link support website. Power Solid Orange The DBA-1510P is Setup Preparation performing its startup procedure Solid Green The DBA-1510P is ready Please ensure that the following items are to use readily available before continuing the quick LAN Solid Green The DBA-1510P is installation process. connected to another ƒƒ D-Link Business Cloud License device on the network ƒƒ DBA-1510P Registration in D-Link Business Blinking Green The DBA-1510P is transferring data Cloud Cloud Solid Orange The DBA-1510P is ƒƒ DBA-1510P is able to connect to D-Link connecting to the D-Link Business Cloud through internet. Business Cloud Solid Green The DBA-1510P is System Requirements currently in Cloud mode Solid Red The DBA-1510P is not If you are unable to connect to the D-Link working properly in Cloud mode Business Cloud through the Internet due to 2.4 Ghz Solid Green The DBA-1510P is your networking configuration you will need to operating in 2.4 Ghz manually configure the DBA-1510P. Below are mode the minimum system requirements needed to Blinking Green The DBA-1510P is manually configure the device. transferring data over 2.4 Ghz ƒƒ A n Ethernet port, or an installed Ethernet 5 Ghz Solid Green The DBA-1510P is operating in 5 Ghz mode adapter Blinking Green The DBA-1510P is ƒƒ Internet Explorer 9.0, Safari 5.0, Firefox 19, transferring data over Chrome 25 or later versions of these browsers 5 Ghz Package Contents Interfaces ƒƒ DBA-1510P Business Cloud Access Point ƒƒ Mounting Ring ƒƒ Power Adapter ƒƒ Ethernet Cable ƒƒ Console Cable ƒƒ Rubber Feet If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage than the one included with the DBA- 1510P will damage the device and void the warranty for this product. 2

Bottom The DBA-1510P will automatically connect ENGLISH ƒƒ Power Receptor to the D-Link Business Cloud, download its ENGLISH ƒƒ LAN Port (PoE) configuration, and join the appropriate network. ƒƒ Serial Console Port D-Link Business Cloud Switch or Router Switch or Router DBA-1510P Management Front ƒƒ Kensington Security Slot If you are unable to connect the DBA-1510P to ƒƒ Reset Button the D-Link Business Cloud through the Internet due to your networking configuration you will Management Press the Reset Button between 2 to 5 need to DBA-1510P manually configure the DBA-1510P seconds to restart the device. using one of the following options. Press the Reset Button between 6 to 15 1. Connect the DBA-1510P and your seconds to restore the device to its factory computer directly DBA-1510P via a straight-through Switch or Router Management default settings. Ethernet cable. You can then manage the access point from your computer using the Press the Reset Button more than 15 seconds following steps. to restore the device to its factory default DBA-1510P Management settings and also force the loading of alternate Enter the DBA-1510P hostname in the firmware. 6 address field of your browser and then D-Link DBA-1510P Quick Install Guide press Enter. The default hostname is ENGLISH “DBA-1510P-XXXX” where XXXX is the Installation last 4 digits of the MAC address listed on the device label located on the bottom of the device. Step 1 – Powering The Device D-Link Business Cloud Log in to the administration web pages. The To power on the DBA-1510P, you can use one default login information is: of the two following methods: Username: admin Switch or Router Switch or Router Password: admin DBA-1510P Management 1. Connect the supplied power adapter 2. Plug one end of your Ethernet cable into the LAN port of the DBA-1510P, and the other end into a port on a Power over DBA-1510P Management Ethernet enabled switch. 2. Connect the DBA-1510P and your Step 2 – Configure The Device computer to the same switch or router. You Switch or Router can then manage the access point DBA-1510P from Management The easiest way to configure the DBA-1510P your computer using the following steps. is to connect the DBA-1510P to the Internet through a switch or router. Connect your Enter the DBA-1510P hostname in the computer to the Internet and manage the address field of your browser DBA-1510P and then Management DBA-1510P via D-Link Business Cloud. press Enter. The default hostname is 6 D-Link DBA-1510P Quick Install Guide 3

D-Link Business Cloud “DBA-1510P-XXXX” where XXXX is the Mounting on a Solid Wall last 4 digits of the MAC address listed on ENGLISH the device label Switch locatedSwitch or Router onorthe bottom Router of Management Place the plastic wall mounting ring on a wall DBA-1510P the device. or ceiling. Log in to the administration web pages. 1. Mark the points where you will insert the The default login information is: screws. Remove the mounting ring. Username: admin DBA-1510P Management Password: admin Switch or Router Management DBA-1510P 3. Connect your computer to the DBA-1510P wirelessly via the SSID “DBA-1510P-XXXX” where XXXX is the ENGLISH last 4 digits of the MAC address DBA-1510P listed on Management the device label located on the bottom 6 of the device. You can then manage D-Link DBA-1510P Quick the Install Guide access point D-Link fromBusiness yourCloudcomputer using the following steps. 2. Drill holes in the marked points and insert the plastic wall anchors. Enter the DBA-1510P hostname in the addressSwitch fieldor Router of your browser and then Switch or Router Management 3. Use the supplied screws to attach the DBA-1510P press Enter. The default hostname is mounting ring to the wall. “DBA-1510P-XXXX” where XXXX is the last 4 digits of the MAC address listed on the device label located on the bottom of the device. DBA-1510P Management Log in to the administration web pages. The default login information is: Username: admin Switch or Router Management DBA-1510P Password: admin DBA-1510P Management Note: Once the device has been manually 6 D-Link DBA-1510P Quick Install Guide configured, it must be able to connect to the D-Link Business Cloud in order to continue functioning properly. Step 3 – Mounting The Device To mount the DBA-1510P, use one of the 4. Plug the Ethernet cable into the LAN port following methods: on the access point. 4

5. If you are not using a PoE switch or router Additional Information with the DBA-1510P, plug the power ENGLISH cable into the Power Receptor on the If you are encountering problems setting up access point. your network, please refer to the user manual that can be obtained from the D-Link website. It 6. Place the DBA-1510P onto the mounting contains many more rules, charts, explanations, ring brackets. Lock the DBA-1510P and examples to help you get your network up into place by rotating the DBA-1510P and running. clockwise. Additional help is available through our offices listed at the back of the user manual or online. To find out more about D-Link products or marketing information, please visit the website http://www.dlink.com. Warranty Information The Warranty information is available at http:// warranty.dlink.com/ Placement on a Desktop 1. Attach the provided rubber feet to the holes located on the back of the DBA- 1510P housing. 2. Plug the Ethernet cable into the LAN port on the access point. 3. If you are not using a PoE switch or router with the DBA-1510P, plug the power cable into the Power Receptor on the access point. 5

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Non-modification Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.


Document Created: 2017-02-20 14:41:36
Document Modified: 2017-02-20 14:41:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC