RF Exposure Info MPE

FCC ID: KA2AP2680A1

RF Exposure Info

Download: PDF
FCCID_3793109

RF Exposure Report Report No.: SA171024E05B FCC ID: KA2AP2680A1 Test Model: DAP-2680 Received Date: Oct. 24, 2017 Test Date: Nov. 13 to 14, 2017 Issued Date: Jan. 25, 2018 Applicant: D-Link Corporation Address: No.289, Xinhu 3rd Rd., Neihu District, Tapei City 11494, Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA171024E05B Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 171102E03

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 2.5 Calculation Result ............................................................................................................................... 6 Report No.: SA171024E05B Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 171102E03

Release Control Record Issue No. Description Date Issued SA171024E05B Original release. Jan. 25, 2018 Report No.: SA171024E05B Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 171102E03

1 Certificate of Conformity Product: Wireless AC1750 Wave 2 Dual-Band PoE Access Point Brand: D-Link Test Model: DAP-2680 Sample Status: ENGINEERING SAMPLE Applicant: D-Link Corporation Test Date: Nov. 13 to 14, 2017 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Jan. 25, 2018 Wendy Wu / Specialist Approved by : , Date: Jan. 25, 2018 May Chen / Manager Report No.: SA171024E05B Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 171102E03

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time 2 (MHz) Strength (V/m) Strength (A/m) (mW/cm ) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 2 1.34-30 824/f 2.19/f (180/f )* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula 2 Pd = (Pout*G) / (4*pi*r ) where 2 Pd = power density in mW/cm Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 32cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA171024E05B Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 171102E03

2.4 Antenna Gain Antenna Gain Frequency range Cable Length Antenna No. Model Antenna Type Connecter Type (dBi) (GHz ) (mm) 3.6 2.4~2.4835 1 NYS3072 PIFA i-pex (MHF) 60 4.2 5.15~5.85 3.6 2.4~2.4835 2 NYS3073 PIFA i-pex (MHF) 70 4.2 5.15~5.85 3.5 2.4~2.4835 3 NYS3074 PIFA i-pex (MHF) 160 4 5.15~5.85 2.5 Calculation Result For 2.4GHz, 5GHz (U-NII-1 & UNII-3 band) data was copied from the original test report (Report No.: SA171024E05) Frequency Max Power Antenna Gain Distance Power Density Limit 2 2 (MHz) (mW) (dBi) (cm) (mW/cm ) (mW/cm ) 2412-2462 779.921 8.34 32 0.41356 1 5180-5240 676.99 8.91 32 0.40933 1 5260-5320 246.757 8.91 32 0.14920 1 5500-5700 246.496 8.91 32 0.14904 1 5745-5825 341.892 8.91 32 0.20672 1 NOTE: G1/20 G2/20 G3/20 2 2.4GHz: Directional gain = 10 log[(10 + 10 + 10 ) / 3] = 8.34dBi G1/20 G2/20 G3/20 2 5GHz: Directional gain = 10 log[(10 + 10 + 10 ) / 3] = 8.91dBi Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz = 0.41356 / 1 + 0.40933 / 1 = 0.82289 Therefore the maximum calculations of above situations are less than the “1” limit. --- END --- Report No.: SA171024E05B Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: 171102E03


Document Created: 2018-01-25 16:35:22
Document Modified: 2018-01-25 16:35:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC