Test-Report-NII

FCC ID: KA2AP2662A1

Test Report

Download: PDF
FCCID_4244888

Timco Engineering, Inc. Job Number For Timco Use Only Scope Date Filed TCB Application Form 731 Conf. # Grant Note Rev 22 May 10 Shaded areas are REQUIRED Item 1. Applicant’s complete, legal business name: D-Link Corporation Applicant’s FCC Registration Number (FRN): 0007371172 Item 2. Applicant’s mailing address: fill in fields, as appropriate Line 1: 17595 Mt. Herrmann Line 2: KDB Tracking #: City: Fountain Valley State: California Country: United States Zip/Postal Code: 92708 Item 3. Applicant Contact Person: Must be the same as the FCC Grantee Contact listed in the FCC database. The Name in the FCC Database will be on the Certification. https://fjallfoss.fcc.gov/oetcf/eas/reports/GranteeSearch.cfm First Name: Brett Last Name: Adair Title: Engineer Telephone: E-mail: breet.adair@dlink.com Fax No.: Item 4. FCC ID Grantee Code: Equipment Product Code (14 characters maximum): consisting of: KA2 AP2662A1 include “dashes” (-) where appropriate Item 5. TIMCO’s Customer: All questions regarding the application will be directed to this contact. The Original Grant and Invoice will be sent to this contact. Firm Name: Telephone: Ext: Fax: No.: Bureau Veritas Consumer Products Services 886 3 318 3232 886 3 327 0892 (H.K.) Ltd., Taoyuan Branch First Name: Amanda Middle Initial: Last Name: Wu Address Line 1: No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang P.O. Box: Address Line 2: City: Taoyuan Hsien State: Country (if foreign address): Taiwan Zip/Postal Code: 333 E-mail: amanda.wu@tw.bureauveritas.com Item 6. Test Firm Used to Take Measurements: Firm Name: Telephone: Ext.: Fax No.: Bureau Veritas Consumer Products Services 886 3 318 3232 5210 886 3 327 0892 (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory First Name: Eric Middle Initial: Last Name: Lin Address Line 1: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park P.O. Box: Address Line 2: City: Hsinchu City State: Country (if foreign address): Taiwan Zip/Postal Code: 300 E-mail: eric-wp.lin@tw.bureauveritas.com TW2022 FCC Registered Test Site Number (Required for Part 15 and 18 applications) or Designation # under MRA or within USA Item 7. SHORT-TERM request: * Does this application include a request for SHORT-TERM confidentiality for any portion(s) Yes No of the data contained in this application pursuant to FCC DA 04-1705 dated 6/15/2004? PERMANENT request: * Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR 0.459 of the Commission Rules? Yes No Request for Grant Deferral Yes: No: Date: Item 8. *Is this application for modular approval? Yes No Modular Type: (only complete if you answered Yes to Item 8) Single Modular Approval Split Modular Approval Limited Single Modular Approval Limited Split Modular Approval Item 9. *Is this application for software defined radio authorization? Yes No Item 10. Equipment Class: 3-digits required Enter a brief description of the product being marketed. NII (List available for download) Wireless AC1200 Wave 2 Dual-Band PoE Access Point (Maximum 50 Characters)

Item 11. *Application is for: Original Equipment Change in identification of presently authorized equipment: Original FCC ID Grant Date (MM/DD/YYYY) Class II permissive change or modification of presently authorized equipment Class III permissive change to software defined radio Note: this may only be filed for applications pertaining to Software Defined Radio Item 12. Is the equipment in this application: * (a) a composite device subject to an additional equipment authorization? Yes No * (b) part of a system that operates with, or is marketed with, another device that requires an equipment authorization? Yes No If either of the above questions is answered “Yes” complete section 12 (c). (c) The related application: has been granted under the FCC ID(s) listed to the right i. FCC ID: KA2AP2662A1 is in the process of being filed under the FCC ID(s) listed to the right ii. FCC ID: is pending with the FCC under the FCC ID(s) listed to the right iii. FCC ID: has a mix of pending and granted statuses under the FCC ID(s) listed to the right iv. FCC ID: Item 13. * Equipment will be operated under FCC Rule Part(s): (Must match Test Report. Please specify Exact Rule Part) 15.407 Item 14. EQUIPMENT SPECIFICATIONS: Where applicable Frequency range in MHz Rated RF Frequency Emission FCC Grant power output tolerance Designator Rule Part Notes (See 47 CFR 2.201 (only use for (Example- IN and 2.202) Multiple Rules) CC, MO) %, Hz, Low Freq High Freq WATTS Value ppm 5180 5240 0.691 15.407 5745 5825 0.660 15.407 5260 5320 0.251 15.407 5500 5700 0.250 15.407 Equipment Authorization Waiver * Is there an equipment authorization waiver associated with this application? Yes No If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? Yes No (Continued on Next Page)

Read each certification carefully before answering and signing this application WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312 (a) (1)), AND/OR FORFEITURE (U.S. TITLE 47, SECTION 503). Item 15. APPLICANT/AGENT CERTIFICATION: I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization issued by the TCB, under the authority of the FCC, as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. Authorizing an agent to sign this application is done solely at the applicant’s discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above Section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time. If different from Applicant’s contact (Item 3) you must supply a Letter of Authorization. This authorization letter must be signed by the applicant / grantee (Item 3). The authorization letter MUST name the person that they are authorizing to sign on their behalf. *Signature of Authorized Applicant: (Must be actual signature) * Name & Title of Authorized Signature: (Typed) Amanda Wu / Senior Specialist *Company Name of Person Signing Application: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch NOTE: An asterisk ‘*’ preceding a field indicates it must be completed. S:\TIMCO\QA\Master Documents\731_TCB_Rev_22May10.doc

Instructions for completing the Timco Engineering, Inc. TCB Application Form 731 All Shaded areas are required Item 1, Item 2 and Item 3: Please complete these sections with the APPLICANT’S contact information. This information will be verified against the information listed in the FCC’s database. Changes in Applicant contact information must be handled separately with the FCC. Contact us if changes to the Applicant’s information is necessary. Item 4: Please enter the FCC ID of the device. The FCC ID consists of the 3-digit Grantee Code and an Equipment Product Code. The Equipment Product Code may consist of up to 14 characters and may contain “dashes” (-). Please remember to use dashes when appropriate. Item 5: Timco’s Customer Contact - This is Timco’s customer. Only one contact is acceptable: the organization that submits the application. All correspondence regarding the application will be directed to this contact. When issued, the original Grant and Invoice will be sent to this contact. This contact may not always be the test lab that performed the testing of the device. This contact may be a third-party agent or the Applicant itself. Please complete all areas. Item 6: Please indicate the name and location of the Test Laboratory where the testing took place. Please also identify the Test Lab’s contact person and their contact information. For Part 15 and Part 18 applications please record the FCC registered test site number or the Test Labs Designation Number under MRA or within USA. Item 7: Please indicate if a request for confidentiality of certain exhibits is requested with this application. You now can choose between short-term confidentiality or permanent confidentiality. Short-term confidentiality is described in FCC DA 04-1705 dated 6/15/04. A separate cover letter exhibit must be submitted with the application explaining either request for confidentiality. This cover letter must refer to the correct FCC Rules that govern confidentiality, must indicate which exhibits confidentiality is requested for and must provide adequate reason for the request. Additional fees apply. Please note that the release date listed for Short-term Confidentiality must not exceed the 180 days allowed by the FCC from the date of Grant. Deferral Grant Request- If the applicant wishes to postpone the date of grant they have the option to do so. The Yes box much be checked and a date must be listed. By checking this box you agree to the additional fees assessed for this service. Item 8: Please indicate if the application if for modular approval. If yes, please justify the modular type and a separate cover letter must be submitted addressing the modular approval requirements of FCC 15.212. Item 9: Please indicate if the application is for authorization of a software-defined radio. Item 10: Please provide the 3-digit Equipment Class. Examples of Equipment Classifications include “DXX” for Part 15 Low Power Communication Device Transmitter and “8CC” for Part 18 Consumer Device (different Equipment Classifications may apply for your device). This list is available for download, “731 Form Equipment Code List”. Please provide a brief description of the device. The description that you enter here will appear on the final Grant of Equipment Authorization. (example: 3G Cell phone, laptop with WiFi and Bluetooth, remote control for toy, or garage door opener, etc. ) Item 11: Please indicate what type of application is being submitted. With applications for a Change in ID of Previously Authorized Equipment or a Class II Change, a separate cover letter exhibit explaining the details of the change must accompany the application. Item 12: Please indicate if the equipment in this application is a composite device or part of a system. Complete Item 12c only if you check “Yes” in Items 12a or 12b. Item 13: Please indicate the FCC Rule Part(s) that the equipment will be operated under. Item 14: Please complete the appropriate sections for the Equipment Specifications. Item 15: Please affix the signature and Title of the authorized Applicant.


Document Created: 2019-03-28 09:51:48
Document Modified: 2019-03-28 09:51:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC