RF Exposure report

FCC ID: KA2AP1620B1

RF Exposure Info

Download: PDF
FCCID_4086768

RF Exposure Report Report No.: SA180424C18 R2 FCC ID: KA2AP1620B1 Model: DAP-1620 Series Model: DRA-1360 Received Date: Sep. 11, 2017 Test Date: Sep. 15, 2017 ~ May 18, 2018 Issued Date: Oct. 12, 2018 Applicant: D-Link Corporation Address: 17595 Mt. Herrmann, Fountain Valley, California, United States, 92708 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA180424C18 R2 Page No. 1 / 6 Report Format Version: 6.1.1 Cancels and replaces the report No.: SA180424C18 R1 dated Sep. 25, 2018

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power........................................................................... 6 Report No.: SA180424C18 R2 Page No. 2 / 6 Report Format Version: 6.1.1 Cancels and replaces the report No.: SA180424C18 R1 dated Sep. 25, 2018

Release Control Record Issue No. Description Date Issued SA180424C18 Original release May 24, 2018 SA180424C18 R1 Added one model and revised product name Sep. 25, 2018 SA180424C18 R2 Added remark on page 6 Oct. 12, 2018 Report No.: SA180424C18 R2 Page No. 3 / 6 Report Format Version: 6.1.1 Cancels and replaces the report No.: SA180424C18 R1 dated Sep. 25, 2018

1 Certificate of Conformity Product: AC1300 Wi-Fi Range Extender Brand: D-Link Corporation Model: DAP-1620 Series Model: DRA-1360 Sample Status: Engineering sample Applicant: D-Link Corporation Test Date: Sep. 15, 2017 ~ May 18, 2018 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Oct. 12, 2018 Pettie Chen / Senior Specialist Approved by : , Date: Oct. 12, 2018 Bruce Chen / Project Engineer Report No.: SA180424C18 R2 Page No. 4 / 6 Report Format Version: 6.1.1 Cancels and replaces the report No.: SA180424C18 R1 dated Sep. 25, 2018

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 2 1.34-30 824/f 2.19/f (180/f )* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA180424C18 R2 Page No. 5 / 6 Report Format Version: 6.1.1 Cancels and replaces the report No.: SA180424C18 R1 dated Sep. 25, 2018

3 Calculation Result of Maximum Conducted Power Frequency Band Max Power Antenna Gain Distance Power Density Limit (MHz) (dBm) (dBi) (cm) (mW/cm2) (mW/cm2) 2412-2462 24.48 4.01 20 0.141 1 CDD Mode 5180-5240 24.93 5.01 20 0.196 1 5745-5825 25.38 5.01 20 0.218 1 Beamforming Mode 5180-5240 21.92 5.01 20 0.098 1 5745-5825 22.37 5.01 20 0.109 1 Remark: The above Max power is tune-up power. Note: 2.4GHz Band: Directional gain = 1dBi +10log(2) = 4.01dBi 5GHz Band: Directional gain = 2dBi +10log(2) = 5.01dBi Conclusion: The WLAN 2.4G & WLAN 5G can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density WALN 2.4GHz + WALN 5GHz = 0.141 + 0.218 = 0.359 Therefore the maximum calculations of above situations are less than the “1” limit. ---END--- Report No.: SA180424C18 R2 Page No. 6 / 6 Report Format Version: 6.1.1 Cancels and replaces the report No.: SA180424C18 R1 dated Sep. 25, 2018


Document Created: 2018-10-12 15:11:27
Document Modified: 2018-10-12 15:11:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC