TEST REPORT

FCC ID: K7SF8E859-MSE

Test Report

Download: PDF
FCCID_589776

Test Report -----------------------------------------------------------------------------                     1/12
Report No.            B1515050754
FCC ID                K7SF8E859-MSE
Specifications        FCC Part 15, Class B
Test Method           ANSI C63.4

Applicant                 Belkin Corporation
Applicant                 501 West Walnut Street Compton,
address                   CA 90220-5221, USA

Items tested              Wireless Optical Mouse
Model No.                 F8E859-BNDL
Sample No.                B15050753
Frequency Range           26.96MHz to 27.28MHz

Results                   Compliance (As detailed within this report)
Date                      10/04/2005 (month / day / year)(Sample received)
                          10/05/2005 (month / day / year)(Tested)

Prepared by                                                                  Project Engineer


Authorized by                                                                General Manager
                                                                             (Frank Tsai)
Issue date                            October 07, 2005                       (month / day / year)

Modifications             None
Tested by                 Training Research Co., Ltd. (Accredited by NVLAP)
Office at                 2, Lane 194, Huan-Ho Street, Hsichih, Taipei Hsien 221, Taiwan
Open site at              No. 15, Lane 530, Pa-Lian RD., Sec. 1, Hsichih City, Taipei Hsien, Taiwan, R.O.C.

Conditions of issue :
   This test report shall not be reproduced except in full, without written approval of
   TRC. And the test result contained within this report only relate to the sample
   submitted for testing.
   The test data in this test report are following the procedures in accordance with
   the terms of accreditation.
   This test report and measurements made by TRC are traceable to the NIST only
   Conducted and Radiated Method (TRC is accredited by NVLAP, code No.:
   200174-0).
   The device has been tested is fully complied with the requirements the Directive
   FCC Part 15.


Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778


Test Report -----------------------------------------------------------------------------                                                  2/12




Contents
Chapter 1 Introduction
Description of EUT ................................................................................................................... 3
Configuration of Test Setup ...................................................................................................... 4
List of Support Equipment ........................................................................................................ 4


Chapter 2 Conducted Emission Test
Test Condition and Setup .......................................................................................................... 5


Chapter 3 Peak Power Measurement (Frequency Band: 26.96 ~ 27.28)
Test Setup.................................................................................................................................. 6
Test Procedure........................................................................................................................... 6


Chapter 4 Radiated Emission Test
Test Condition and Setup .......................................................................................................... 7
Radiated Test Placement ........................................................................................................... 8


Appendix A :
Peak Power and Radiated test result ......................................................................................... 9


Appendix B :
Band Edge of Measurement ..................................................................................................... 12




Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778


Test Report -----------------------------------------------------------------------------   3/12



                                Chapter 1 Introduction

Description of EUT:


    EUT                   :   Wireless Mouse
    Model No.             :   F8E859-BNDL
    Product name          :   Wireless Optical Mouse
    Frequency Range       :   26.96 – 27.28 MHz
    Power Type            :   Transmitter: Powered by two 1.5VDC AA batteries


    *This EUT has two channels (each with 256 IDs):
   1. 27.1000 MHz                              2. 27.0500 MHz



Test method:

      All measurements contained in this report were performed according to the techniques
described in Measurement procedure ANSI C63.4 – 1992.
      Pretest was found that the emission of operating mode is worse than standby mode. So, The
final test is made at the operating mode.
     During testing, the following modes were tested:
     Mode#1: Rx Used USB Interface.
     Mode#2: Rx Used PS/2 Interface, with an USB to PS2 adaptor.
     Mode#3: Rx Used PS/2 Interface.
     The conduction test was found out the “Mode #1” was the worst case.
     The radiation pretest was found out the “Mode #3” was the worst case.
     We only recorded the worse case in this report.
     While testing, the EUT was made to transmit continuously and adjusted at a position, which
transmitted the maximum emission.
     The test placement as the photographs showed is the worst case emission placed. (If the
emission is close to the ambient, the resolution BW and view resolution will be reduced and the
data will be recorded by detection of maximum hold peak mode.)


    The testing configuration of test setup is showing in the next page.




Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778


Test Report -----------------------------------------------------------------------------      4/12


Configuration of Test Setup (Test mode: “Normal”)




                                         EUT (Tx)




      EUT:
      Put two AA size, 1.5V battery into the battery cell of EUT, powers the subject device.
      The EUT does not be connected with any product.




List of Support Equipment

Conducted (Radiated) test:
N/A




Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778


Test Report -----------------------------------------------------------------------------              5/12



                          Chapter 2 Conducted Emission Test

Test Condition and Setup:

     All the equipment is placed and setup according to the ANSI C63.4 – 1992.
The EUT is assembled on a wooden table that is 80 cm high, is placed 40 cm from the back-wall
that is a vertical conducting plane. One LISN is for EUT, the other LISN is for support
equipment. They are all placed on the conductive ground. The EUT’s LISN connect a line switch
box for selecting L1 or L2, then connect to a preamplifier and Spectrum.
     The spectrum measured from 150KHz to 30MHz. Conducted emission levels are detected at
max. peak mode. But if the max. peak mode failed or over average limit, it will be measured by
QP and average detection mode using the Receiver.
     While testing, there is the worst-emission plot printed at peak detection mode, and there are
more than 6 highest emissions relative to limit recorded. The plot is kept as the original data, not
included in test report.



List of test Instrument :
                                                                                   Calibration Date
Instrument Name       Model No.            Brand              Serial No.           Last time Next time
Receiver              SCR3102              SCHAFFNER          012                  05/13/05     05/12/06
LISN (EUT)            3825/2               EMCO               9411-2284            07/21/05     07/20/06
LISN (Support E.)     3825/2               EMCO               9210-2007            09/03/05     09/02/06
Line switch box       CB-01                TRC                98-04                05/29/05     05/28/06
FTB-1-6 Attenuator    15542                mini-circuits      9620 03              05/29/05     05/28/06
20dB Attenuator       CAT-20               mini-circuits      9620 13              05/29/05     05/28/06
Coaxial Cable         BNC3200B-0058        Jyebao             CL-05                05/29/05     05/28/06
Coaxial Cable         BNC31VB-0316         Jyebao             IF-01ca0069-036      05/29/05     05/28/06
50ohm terminator      370BNM               NARDA              PWR5W                07/21/05     07/20/06
50ohm terminator      370BNM               NARDA              PWR5W                07/21/05     07/20/06
50ohm terminator      370BNM               NARDA              PWR5W                09/03/05     09/02/06
50ohm terminator      370BNM               NARDA              PWR5W                09/03/05     09/02/06

The level of confidence of 95% , the uncertainty of measurement of conducted emission is +3.1/-4.84 dB .


     Test Result: N/A




Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778


Test Report -----------------------------------------------------------------------------                6/12



Chapter 3 Peak Power Measurement (Frequency Band: 26.96 ~ 27.28)

Test Setup:
1. Test Setup:

                                                     3M




                                                                                      EUT
                            1M




                   Spectrum


2. Test Procedure:
           a. The EUT was setup in the anechoic chamber as shown above.
           b. The loop antenna was located upon its plane vertical, 3-meter distance from the
              EUT. The center of the loop is 1-meter above the ground plane.
           c. In order to find the maximum radiation, the EUT was rotated 360°. The measuring
              antenna was rotated about its axis at each azimuth about the EUT.

List of test Instrument :
                                                                                   Calibration Date
Instrument Name           Model No.        Brand              Serial No.           Last time Next time
Receiver                  SCR3102          SCHAFFNER          012                  05/13/05     05/12/06
Control Box               TWR95-4          TRC                C9001-2              N/A          N/A
Antenna                   CBL6141A         SCHAFFNER          4206                 05/27/05     05/26/06
Open test side                                                                     05/29/05     05/28/06
Pre-amplifier             TRC-CB-2         TRC                CB-002               05/29/05     05/28/06
Coaxial Cable (20meter)   RG-214/U         Jyebao             CL-002               05/29/05     05/28/06
Coaxial Cable (50cm)      BNC31VB-0316     Jyebao             CL-002               05/29/05     05/28/06
Coaxial Cable (20cm)      BNC31VB-0318     Jyebao             CL-007               05/29/05     05/28/06
Coaxial Cable (55cm)      BNC31VB-0316     Jyebao             CL-006               05/29/05     05/28/06
Coaxial Cable (55cm)      BNC31VB-0316     Jyebao             CL-005               05/29/05     05/28/06

The level of confidence of 95%, the uncertainty of measurement of radiated emission is +2.85/-2.77 dB.


      Test Result : Appendix A


Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778


Test Report -----------------------------------------------------------------------------                7/12



                           Chapter 4 Radiated Emission Test
Test Condition and Setup:

     Pretest :        Prior to the final test ,the EUT is placed in an anechoic chamber, and scan
from 30MHz to 1GHz. The devices rotated through three orthogonal axes to determine which
attitude and configuration produces the highest emission relative to the limit. This is done to
ensure the radiation exactly emits form the EUT.
      Final test: Final radiation measurements is made on a 3 – meter open-field test site.
The EUT's maximum emission of radiation is placed on a nonconductive table, which is 0.8m
height, the top surface is 1.0 x 1.5 meter. All placement is according to ANSI C63.4 - 1992.
      The emissions was examined from 30 MHz to 1000 MHz measured by receiver.
      The whole range Antenna is used to measure frequency from 30 MHz to 1 GHz. The final
test is used the receiver.
      Measure more than six top marked frequencies generated form pretest by computer step by
step at each frequency. The EUT is rotated 360 degrees, and antenna is raised and lowered from
1 to 4 meters to find the maximum emission levels. The antenna is used with both horizontal and
vertical polarization.
      Appropriated preamplifier, which is made by TRC is used for improving sensitivity and
precautions is taken to avoid overloading. The spectrum analyzer’s 6dB bandwidth is set to 120
KHz, and the EUT is measured at quasi-peak mode.
      If the emission is close to the frequency band of ambient, the tester will recheck the data
and the corrected data will be written in the test data sheet. If the emission is just within the
ambient, the data from shield room will be taken as the final data.

List of test Instrument :
                                                                                   Calibration Date
Instrument Name           Model No.        Brand              Serial No.           Last time Next time
Receiver                  SCR3102          SCHAFFNER          012                  05/13/05     05/12/06
Control Box               TWR95-4          TRC                C9001-2              N/A          N/A
Antenna                   CBL6141A         SCHAFFNER          4206                 05/27/05     05/26/06
Open test side                                                                     05/29/05     05/28/06
Pre-amplifier             TRC-CB-2         TRC                CB-002               05/29/05     05/28/06
Coaxial Cable (20meter)   RG-214/U         Jyebao             CL-002               05/29/05     05/28/06
Coaxial Cable (50cm)      BNC31VB-0316     Jyebao             CL-002               05/29/05     05/28/06
Coaxial Cable (20cm)      BNC31VB-0318     Jyebao             CL-007               05/29/05     05/28/06
Coaxial Cable (55cm)      BNC31VB-0316     Jyebao             CL-006               05/29/05     05/28/06
Coaxial Cable (55cm)      BNC31VB-0316     Jyebao             CL-005               05/29/05     05/28/06

The level of confidence of 95%, the uncertainty of measurement of radiated emission is +2.85/-2.77 dB.


      Test Result : Pass (Appendix A)


Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778


Test Report -----------------------------------------------------------------------------   8/12


Radiated Test Placement: (Photographs)




Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778


Test Report -----------------------------------------------------------------------------               9/12



                                            Appendix A

Peak Power Test Result: (Horizontal)(Test mode: Normal)

                      Reading           Correction       Corrected             Limit             Margin
  Frequency
                   Amplitude             Factors         Amplitude
     MHz              dBµV/m               dB             dBµV/m             dBµV/m               dB
       27.1000              72.43               -8.30              64.13             80.00          -15.13


Radiated Emission Test Result: (Horizontal) (Test mode: Normal)
Test Conditions:
     Testing site :        Temperature : 28 ° C                Humidity : 73 % RH
                 Reading         Ant.                Correction          Corrected     Class B
Frequency                                 Table                                                    Margin
              Amplitude         Height                  Factors          Amplitude      Limit
   MHz         dBµV/m             m      degree           dB             dBµV/m        dBµV/m       dB

  125.4525             39.05      2.50          48              -4.72        34.33        43.52        -9.19

  197.1525             33.82      2.50       121                -5.40        28.42        43.52     -15.10

  415.6900             21.82      0.97          32                2.97       24.79        46.02     -21.23

  581.9680             27.32      0.97       328                  6.15       33.47        46.02     -12.55

        ***

Note:
     1. Margin = Amplitude – limit, if margin is minus means under limit.
     2. Corrected Amplitude = Reading Amplitude – Correction Factors
     3. Correction factor = Antenna factor + ( Cable Loss – Amplitude gain)
      (For example : 30MHz correction factor = 15.5 + (–15.26) = 0.24 dB/m)




Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778


Test Report ----------------------------------------------------------------------------             10/12


Peak Power Test Result: (Vertical) (Test mode: Normal)

                      Reading           Correction      Corrected            Limit             Margin
  Frequency
                   Amplitude             Factors        Amplitude
     MHz              dBµV/m              dB/m            dBµV             dBµV/m               dB
       27.1025              75.62              -8.30              67.32            80.00          -12.68


Radiated Emission Test Result: (Vertical) (Test mode: Normal)
Test Conditions:
     Testing site :        Temperature : 28 ° C               Humidity : 73 % RH
                 Reading         Ant.                Correction        Corrected     Class B
Frequency                                 Table                                                  Margin
              Amplitude         Height                 Factors         Amplitude      Limit
   MHz         dBµV/m             m      degree          dB            dBµV/m        dBµV/m       dB

  126.0025             43.43      1.00        72               -4.66       38.77        43.52        -4.75

  156.0025             43.09      2.50       200               -4.47       38.62        43.52        -4.90

  270.4900             37.67      1.00       306               -3.02       34.65        46.02     -11.37

        ***

Note:
     1. Margin = Amplitude – limit, if margin is minus means under limit.
     2. Corrected Amplitude = Reading Amplitude – Correction Factors
     3. Correction factor = Antenna factor + ( Cable Loss – Amplitude gain)
      (For example : 30MHz correction factor = 15.5 + (–15.26) = 0.24 dB/m)




Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778


Test Report ----------------------------------------------------------------------------   11/12



                                       Appendix C

Band Edge of Measurement: (Frequency Band: 26.96 ~ 27.28)


Lower channel




                              26.96MHz       <<   Class B Limit.




Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778


Test Report ----------------------------------------------------------------------------   12/12




Upper channel:




                                27.28 MHz >> Class B Limit.




Report No.: B1515050754
Training Research Co., Ltd., TEL: 886-2-26461146, Fax: 886-2-26461778











Document Created: 2005-10-07 17:40:17
Document Modified: 2005-10-07 17:40:17

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC