Test Report

FCC ID: K7SF7U094

Test Report

Download: PDF
FCCID_4414492

FCC Pretest Report Report No.: RF190724C15 FCC ID: K7SF7U094 Test Model: F7U094 Received Date: Jul. 24, 2019 Test Date: Jul. 25 ~ Jul. 30, 2019 Issued Date: Aug. 15, 2019 Applicant: Belkin International, Inc. Address: 12045 East Waterfront Drive, Playa Vista, CA 90094 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190724C15 Page No. 1 / 33 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 6 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 7 3.3 Description of Support Units ............................................................................................................... 8 3.3.1 Configuration of System under Test .................................................................................................... 8 3.4 General Description of Applied Standards .......................................................................................... 8 4 Test Types and Results ........................................................................................................................ 9 4.1 Radiated Emission and Bandedge Measurement............................................................................... 9 4.1.1 Limits of Radiated Emission and Bandedge Measurement ................................................................ 9 4.1.2 Test Instruments ................................................................................................................................ 10 4.1.3 Test Procedures.................................................................................................................................. 11 4.1.4 Deviation from Test Standard ............................................................................................................. 11 4.1.5 Test Set Up ........................................................................................................................................ 12 4.1.6 EUT Operating Conditions................................................................................................................. 12 4.1.7 Test Results ....................................................................................................................................... 13 4.2 Conducted Emission Measurement .................................................................................................. 26 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 26 4.2.2 Test Instruments ................................................................................................................................ 26 4.2.3 Test Procedures................................................................................................................................. 27 4.2.4 Deviation from Test Standard ............................................................................................................ 27 4.2.5 Test Setup .......................................................................................................................................... 27 4.2.6 EUT Operating Conditions................................................................................................................. 27 4.2.7 Test Results ....................................................................................................................................... 28 5 Pictures of Test Arrangements .......................................................................................................... 32 Appendix – Information of the Testing Laboratories ................................................................................. 33 Report No.: RF190724C15 Page No. 2 / 33 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF190724C15 Original release Aug. 15, 2019 Report No.: RF190724C15 Page No. 3 / 33 Report Format Version: 6.1.1

1 Certificate of Conformity Product: BOOST↑CHARGE™ Wireless Charging Stand Special Edition Brand: belkin Test Model: F7U094 Sample Status: Engineering sample Applicant: Belkin International, Inc. Test Date: Jul. 25 ~ Jul. 30, 2019 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.209) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Aug. 15, 2019 Polly Chien / Specialist Approved by : , Date: Aug. 15, 2019 Bruce Chen / Project Engineer Report No.: RF190724C15 Page No. 4 / 33 Report Format Version: 6.1.1

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.209) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission Pass Minimum passing margin is -10.24dB at 5.61618MHz. Meet the requirement of limit. 15.209 Radiated Emission Test Pass Minimum passing margin is -8.2dB at 59.06MHz 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.94 dB 9kHz ~ 30MHz 3.04 dB Radiated Emissions up to 1 GHz 30MHz ~ 200MHz 3.86 dB 200MHz ~ 1000MHz 3.87 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF190724C15 Page No. 5 / 33 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product BOOST↑CHARGE™ Wireless Charging Stand Special Edition Brand belkin Test Model F7U094 Sample Status Engineering sample Rating 15Vdc (Adapter) Modulation Type FSK Operating Frequency 127.8 kHz Dimension for iPhone charging 47.52cm2 (diameter = 77.8mm) coil Antenna Type Coil antenna Field Strength 81.1dBuV/m Accessory Device Adapter Data Cable Supplied NA Maximum Power Output for 7.5W Phone charging coil Note: 1. The EUT uses following adapter. Brand belkin Model 2ADH023H NJ Input Power 100-240Vac, 50/60Hz, 0.7A MAX Output Power 15Vdc, 1.5A Power Line 1.5m DC cable without core attached on adapter 2. The EUT has WPC (Wireless Power Consortium) technology. 3.2 Description of Test Modes 1 channel is provided to this EUT Channel Freq. (kHz) 1 127.8 Report No.: RF190724C15 Page No. 6 / 33 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE<1G PLC A √ - Charging Mode (iPhone in the stand-up position) B √ √ Charging Mode (iPhone in the lie-down position) C √ √ Standby Mode Where RE<1G: Radiated Emission below 1GHz PLC: Power Line Conducted Emission Note: 1. The EUT is designed to be positioned on the X-plane only. 2. “-” means no effect. 3. After the pretesting on radiated emission (30MHz to 1GHz) among mode A and B, mode B was found to be the worst case test mode. Therefore, radiated emission (30MHz to 1GHz) and conducted emission among mode B had been chosen for final test. Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Mode Available Channel Tested Channel A, B, C 1 1 Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Mode Available Channel Tested Channel B, C 1 1 Test Condition: Applicable To Environmental Conditions Input Power Tested by RE<1G 22 deg. C, 66% RH 120Vac, 60Hz Adair Peng PLC 25 deg. C, 75% RH 120Vac, 60Hz Willy Cheng Report No.: RF190724C15 Page No. 7 / 33 Report Format Version: 6.1.1

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. iPhone X APPLE A1901 NA NA - 3.3.1 Configuration of System under Test Charging Mode: Test Mode A, B iPhone X (A) Adapter (EUT) EUT Standby Mode: Test Mode C Adapter (EUT) EUT 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.209) ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF190724C15 Page No. 8 / 33 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement FOR FREQUENCY BELOW 30MHz Frequency Field Strength (dBuV/m) Measurement Distance (MHz) uV/m dBuV/m (meters) 0.009 – 0.490 2400 / F (kHz) 48.52-13.80 300 0.490 – 1.705 24000 / F (kHz) 33.80-22.97 30 1.705 – 30.0 30 29.54 30 FOR FREQUENCY BETWEEN 30-1000MHz Frequency Class A (at 10m) Class B (at 3m) (MHz) uV/m dBuV/m uV/m dBuV/m 30-88 90 39.1 100 40.0 88-216 150 43.5 150 43.5 216-960 210 46.4 200 46.0 Above 960 300 49.5 500 54.0 Report No.: RF190724C15 Page No. 9 / 33 Report Format Version: 6.1.1

4.1.2 Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESIB7 100187 May 30, 2019 May 29, 2020 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-171 Nov. 22, 2018 Nov. 21, 2019 SCHWARZBECK HORN Antenna 9120D 209 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK Loop Antenna HLA 6121 45745 Jul. 01, 2019 Jun. 30, 2020 TESEQ Preamplifier Agilent 8447D 2944A10738 Aug. 21, 2018 Aug. 20, 2019 (Below 1GHz) Preamplifier Agilent 8449B 3008A02465 Mar. 27, 2019 Mar. 26, 2020 (Above 1GHz) RF signal cable Cable-CH3-03 SUCOFLEX 104 Aug. 21, 2018 Aug. 20, 2019 HUBER+SUHNER (223653/4) RF signal cable SUCOFLEX Cable-CH3-03 HUBER+SUHNER& 104&EMC104-SM-S Aug. 21, 2018 Aug. 20, 2019 (309224+170907) EMCI M-8000 Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.5 Antenna Tower MA 4000 013303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021702 NA NA BV ADT Turn Table TT100 TT93021702 NA NA BV ADT Turn Table Controller SC100 SC93021702 NA NA BV ADT Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 3. Report No.: RF190724C15 Page No. 10 / 33 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for below 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF190724C15 Page No. 11 / 33 Report Format Version: 6.1.1

4.1.5 Test Set Up For Radiated emission below 30MHz EUT& 3m Loop antenna Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions Charging Mode: Test Mode A, B a. The EUT powered by adapter. b. Put the iPhone X on the EUT (wireless charging) during the test. Standby Mode: Test Mode C a. The EUT powered by adapter. Report No.: RF190724C15 Page No. 12 / 33 Report Format Version: 6.1.1

4.1.7 Test Results Below 30MHz Data: Charging Mode Channel TX Channel 1 Average (AV) Detector Function Frequency Range 9 kHz ~ 30 MHz Quasi-Peak (QP) Test Mode A ANTENNA POLARITY & TEST DISTANCE: LOOP ANTENNA PARALLEL AT 3M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.1278 73.9 AV 105.5 -31.6 1.00 293 54.8 19.1 2 3.3747 36.5 QP 69.5 -33.0 1.00 335 16.5 20.0 3 5.5985 37.0 QP 69.5 -32.5 1.00 319 16.7 20.3 4 10.2865 33.9 QP 69.5 -35.6 1.00 213 12.2 21.7 5 15.2149 34.7 QP 69.5 -34.8 1.00 321 12.8 21.9 6 23.2085 37.4 QP 69.5 -32.1 1.00 13 15.3 22.1 7 27.1151 34.8 QP 69.5 -34.7 1.00 70 12.6 22.2 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190724C15 Page No. 13 / 33 Report Format Version: 6.1.1

Channel TX Channel 1 Average (AV) Detector Function Frequency Range 9 kHz ~ 30 MHz Quasi-Peak (QP) Test Mode A ANTENNA POLARITY & TEST DISTANCE: LOOP ANTENNA PERPENDICULAR AT 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.1278 66.1 AV 105.5 -39.4 1.00 15 47.0 19.1 2 3.4348 34.1 QP 69.5 -35.4 1.00 332 14.1 20.0 3 6.8607 33.8 QP 69.5 -35.7 1.00 240 13.1 20.7 4 12.9911 34.6 QP 69.5 -34.9 1.00 147 12.8 21.8 5 17.4987 34.3 QP 69.5 -35.2 1.00 30 12.3 22.0 6 23.2085 35.4 QP 69.5 -34.1 1.00 128 13.3 22.1 7 28.4974 34.8 QP 69.5 -34.7 1.00 94 12.6 22.2 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190724C15 Page No. 14 / 33 Report Format Version: 6.1.1

Channel TX Channel 1 Average (AV) Detector Function Frequency Range 9 kHz ~ 30 MHz Quasi-Peak (QP) Test Mode A ANTENNA POLARITY & TEST DISTANCE: LOOP ANTENNA GROUND-PARALLEL AT 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.1278 71.1 AV 105.5 -34.4 1.00 277 52.0 19.1 2 3.550 37.2 QP 69.5 -32.3 1.00 286 17.2 20.0 3 5.5985 35.0 QP 69.5 -34.5 1.00 147 14.7 20.3 4 10.0461 35.4 QP 69.5 -34.1 1.00 123 13.7 21.7 5 15.3351 36.7 QP 69.5 -32.8 1.00 306 14.8 21.9 6 20.3235 36.8 QP 69.5 -32.7 1.00 69 14.7 22.1 7 24.1701 38.7 QP 69.5 -30.8 1.00 243 16.6 22.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190724C15 Page No. 15 / 33 Report Format Version: 6.1.1

Channel TX Channel 1 Average (AV) Detector Function Frequency Range 9 kHz ~ 30 MHz Quasi-Peak (QP) Test Mode B ANTENNA POLARITY & TEST DISTANCE: LOOP ANTENNA PARALLEL AT 3M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.1278 81.1 AV 105.5 -24.4 1.00 333 62.0 19.1 2 2.7737 36.7 QP 69.5 -32.8 1.00 302 16.8 19.9 3 5.3581 36.8 QP 69.5 -32.7 1.00 343 16.6 20.2 4 7.5819 33.7 QP 69.5 -35.8 1.00 154 12.8 20.9 5 12.4502 34.7 QP 69.5 -34.8 1.00 336 12.9 21.8 6 17.4386 36.5 QP 69.5 -33.0 1.00 214 14.5 22.0 7 20.3235 36.7 QP 69.5 -32.8 1.00 141 14.6 22.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190724C15 Page No. 16 / 33 Report Format Version: 6.1.1

Channel TX Channel 1 Average (AV) Detector Function Frequency Range 9 kHz ~ 30 MHz Quasi-Peak (QP) Test Mode B ANTENNA POLARITY & TEST DISTANCE: LOOP ANTENNA PERPENDICULAR AT 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.1278 74.3 AV 105.5 -31.2 1.00 115 55.2 19.1 2 2.8338 35.4 QP 69.5 -34.1 1.00 27 15.5 19.9 3 5.3581 34.7 QP 69.5 -34.8 1.00 192 14.5 20.2 4 10.1663 34.1 QP 69.5 -35.4 1.00 173 12.4 21.7 5 13.5921 34.4 QP 69.5 -35.1 1.00 337 12.6 21.8 6 19.2417 34.4 QP 69.5 -35.1 1.00 80 12.3 22.1 7 25.0716 36.5 QP 69.5 -33.0 1.00 170 14.4 22.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190724C15 Page No. 17 / 33 Report Format Version: 6.1.1

Channel TX Channel 1 Average (AV) Detector Function Frequency Range 9 kHz ~ 30 MHz Quasi-Peak (QP) Test Mode B ANTENNA POLARITY & TEST DISTANCE: LOOP ANTENNA GROUND-PARALLEL AT 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.1278 78.5 AV 105.5 -27.0 1.00 41 59.4 19.1 2 2.7737 42.1 QP 69.5 -27.4 1.00 236 22.2 19.9 3 5.0576 35.1 QP 69.5 -34.4 1.00 287 15.0 20.1 4 9.2046 36.7 QP 69.5 -32.8 1.00 3 15.3 21.4 5 13.3517 35.6 QP 69.5 -33.9 1.00 298 13.8 21.8 6 21.2852 37.4 QP 69.5 -32.1 1.00 300 15.3 22.1 7 25.0716 40.9 QP 69.5 -28.6 1.00 14 18.8 22.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190724C15 Page No. 18 / 33 Report Format Version: 6.1.1

Standby Mode Channel TX Channel 1 Average (AV) Detector Function Frequency Range 9 kHz ~ 30 MHz Quasi-Peak (QP) Test Mode C ANTENNA POLARITY & TEST DISTANCE: LOOP ANTENNA PARALLEL AT 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.1278 69.3 AV 105.5 -36.2 1.00 354 50.2 19.1 2 2.8338 36.1 QP 69.5 -33.4 1.00 102 16.2 19.9 3 5.2379 38.3 QP 69.5 -31.2 1.00 10 18.1 20.2 4 8.9642 34.0 QP 69.5 -35.5 1.00 198 12.7 21.3 5 13.4719 34.6 QP 69.5 -34.9 1.00 114 12.8 21.8 6 18.2200 35.1 QP 69.5 -34.4 1.00 23 13.1 22.0 7 23.2085 36.9 QP 69.5 -32.6 1.00 352 14.8 22.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190724C15 Page No. 19 / 33 Report Format Version: 6.1.1

Channel TX Channel 1 Average (AV) Detector Function Frequency Range 9 kHz ~ 30 MHz Quasi-Peak (QP) Test Mode C ANTENNA POLARITY & TEST DISTANCE: LOOP ANTENNA PERPENDICULAR AT 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.1278 65.5 AV 105.5 -40.0 1.00 273 46.4 19.1 2 2.8338 38.1 QP 69.5 -31.4 1.00 187 18.2 19.9 3 5.2379 38.5 QP 69.5 -31.0 1.00 56 18.3 20.2 4 10.1062 35.0 QP 69.5 -34.5 1.00 322 13.3 21.7 5 11.9693 35.7 QP 69.5 -33.8 1.00 182 13.9 21.8 6 16.2366 34.5 QP 69.5 -35.0 1.00 18 12.6 21.9 7 20.3235 36.0 QP 69.5 -33.5 1.00 12 13.9 22.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190724C15 Page No. 20 / 33 Report Format Version: 6.1.1

Channel TX Channel 1 Average (AV) Detector Function Frequency Range 9 kHz ~ 30 MHz Quasi-Peak (QP) Test Mode C ANTENNA POLARITY & TEST DISTANCE: LOOP ANTENNA GROUND-PARALLEL AT 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *0.1278 63.0 AV 105.5 -42.5 1.00 3 43.9 19.1 2 2.7737 42.1 QP 69.5 -27.4 1.00 27 22.2 19.9 3 5.4783 36.0 QP 69.5 -33.5 1.00 175 15.8 20.2 4 11.1279 34.7 QP 69.5 -34.8 1.00 73 13.0 21.7 5 15.3952 37.0 QP 69.5 -32.5 1.00 238 15.1 21.9 6 20.3836 37.6 QP 69.5 -31.9 1.00 9 15.5 22.1 7 23.9898 40.0 QP 69.5 -29.5 1.00 63 17.9 22.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. Loop antenna was used for all radiated emission below 30MHz. 7. Limit @3m=Limit@300m+40log(300 / 3)=Limit@300m+80 8. Limit @3m=Limit@30m+40log(30 / 3)=Limit@30m+40 Report No.: RF190724C15 Page No. 21 / 33 Report Format Version: 6.1.1

Below 1GHz Data: Charging Mode Channel TX Channel 1 Detector Function Quasi-Peak (QP) Frequency Range 30MHz ~ 1GHz Test Mode B Antenna Polarity & Test Distance: Horizontal At 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 57.12 26.9 QP 40.0 -13.1 2.00 H 268 37.0 -10.1 2 131.00 30.5 QP 43.5 -13.0 1.50 H 71 41.0 -10.5 3 152.39 32.9 QP 43.5 -10.6 2.00 H 78 42.1 -9.2 4 179.61 30.6 QP 43.5 -12.9 1.50 H 74 40.8 -10.2 5 307.93 30.6 QP 46.0 -15.4 1.01 H 236 37.7 -7.1 6 455.70 27.2 QP 46.0 -18.8 2.00 H 120 31.6 -4.4 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF190724C15 Page No. 22 / 33 Report Format Version: 6.1.1

Channel TX Channel 1 Detector Function Quasi-Peak (QP) Frequency Range 30MHz ~ 1GHz Test Mode B Antenna Polarity & Test Distance: Vertical At 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 37.68 30.3 QP 40.0 -9.7 1.00 V 329 41.0 -10.7 2 59.06 31.8 QP 40.0 -8.2 1.00 V 322 41.9 -10.1 3 150.45 24.4 QP 43.5 -19.1 1.00 V 0 33.5 -9.1 4 294.32 27.3 QP 46.0 -18.7 1.50 V 183 34.9 -7.6 5 473.20 28.3 QP 46.0 -17.7 1.00 V 84 32.4 -4.1 6 642.35 27.1 QP 46.0 -18.9 1.50 V 7 27.7 -0.6 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF190724C15 Page No. 23 / 33 Report Format Version: 6.1.1

Standby Mode Channel TX Channel 1 Detector Function Quasi-Peak (QP) Frequency Range 30MHz ~ 1GHz Test Mode C Antenna Polarity & Test Distance: Horizontal At 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 57.12 22.3 QP 40.0 -17.7 1.50 H 62 32.4 -10.1 2 152.39 29.1 QP 43.5 -14.4 1.00 H 250 38.3 -9.2 3 193.22 22.9 QP 43.5 -20.6 2.00 H 68 34.1 -11.2 4 290.43 28.6 QP 46.0 -17.4 1.00 H 135 36.3 -7.7 5 339.04 26.4 QP 46.0 -19.6 1.50 H 81 33.2 -6.8 6 436.26 24.6 QP 46.0 -21.4 1.00 H 290 29.1 -4.5 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF190724C15 Page No. 24 / 33 Report Format Version: 6.1.1

Channel TX Channel 1 Detector Function Quasi-Peak (QP) Frequency Range 30MHz ~ 1GHz Test Mode C Antenna Polarity & Test Distance: Vertical At 3m Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 51.29 22.7 QP 40.0 -17.3 1.50 V 5 32.4 -9.7 2 154.33 21.5 QP 43.5 -22.0 1.00 V 120 30.5 -9.0 3 290.43 25.8 QP 46.0 -20.2 1.50 V 169 33.5 -7.7 4 432.37 24.9 QP 46.0 -21.1 1.00 V 247 29.4 -4.5 5 582.08 25.6 QP 46.0 -20.4 2.00 V 240 27.3 -1.7 6 689.01 27.5 QP 46.0 -18.5 1.00 V 117 27.4 0.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF190724C15 Page No. 25 / 33 Report Format Version: 6.1.1

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESCI 100613 Dec. 10, 2018 Dec. 09, 2019 ROHDE & SCHWARZ RF signal cable 5D-FB Cable-cond1-01 Sep. 05, 2018 Sep. 04, 2019 Woken LISN ROHDE & SCHWARZ ENV216 101826 Feb. 21, 2019 Feb. 20, 2020 (EUT) LISN ROHDE & SCHWARZ ESH3-Z5 100311 Aug. 19, 2018 Aug. 18, 2019 (Peripheral) Software BV ADT_Cond_ NA NA NA ADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 1. 3. The VCCI Site Registration No. is C-12040. Report No.: RF190724C15 Page No. 26 / 33 Report Format Version: 6.1.1

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) were not recorded. NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver EUT 40cm 80cm LISN Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF190724C15 Page No. 27 / 33 Report Format Version: 6.1.1

4.2.7 Test Results Charging Mode Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Test Mode B Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 9.84 43.45 27.05 53.29 36.89 66.00 56.00 -12.71 -19.11 2 0.15782 9.84 40.35 25.24 50.19 35.08 65.58 55.58 -15.39 -20.50 3 0.25932 9.86 29.58 21.18 39.44 31.04 61.45 51.45 -22.01 -20.41 4 0.44325 9.88 30.35 24.10 40.23 33.98 57.00 47.00 -16.77 -13.02 5 0.63856 9.90 26.17 23.28 36.07 33.18 56.00 46.00 -19.93 -12.82 6 5.61618 10.06 31.85 29.70 41.91 39.76 60.00 50.00 -18.09 -10.24 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF190724C15 Page No. 28 / 33 Report Format Version: 6.1.1

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Test Mode B Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 9.82 44.30 27.29 54.12 37.11 66.00 56.00 -11.88 -18.89 2 0.20084 9.84 34.38 20.56 44.22 30.40 63.58 53.58 -19.36 -23.18 3 0.44325 9.87 27.42 21.02 37.29 30.89 57.00 47.00 -19.71 -16.11 4 0.63856 9.87 25.16 23.09 35.03 32.96 56.00 46.00 -20.97 -13.04 5 5.62009 10.04 26.53 23.78 36.57 33.82 60.00 50.00 -23.43 -16.18 6 8.05602 10.11 22.45 17.45 32.56 27.56 60.00 50.00 -27.44 -22.44 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF190724C15 Page No. 29 / 33 Report Format Version: 6.1.1

Standby Mode Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Test Mode C Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.16564 9.84 28.93 4.57 38.77 14.41 65.18 55.18 -26.41 -40.77 2 0.24384 9.86 20.12 2.20 29.98 12.06 61.96 51.96 -31.98 -39.90 3 0.44325 9.88 25.51 9.34 35.39 19.22 57.00 47.00 -21.61 -27.78 4 1.40395 9.93 12.24 4.18 22.17 14.11 56.00 46.00 -33.83 -31.89 5 2.93783 9.98 14.53 5.63 24.51 15.61 56.00 46.00 -31.49 -30.39 6 4.72861 10.04 19.32 9.62 29.36 19.66 56.00 46.00 -26.64 -26.34 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF190724C15 Page No. 30 / 33 Report Format Version: 6.1.1

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Test Mode C Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15802 9.82 30.87 9.56 40.69 19.38 65.57 55.57 -24.88 -36.19 2 0.18910 9.84 25.72 6.04 35.56 15.88 64.08 54.08 -28.52 -38.20 3 0.43579 9.87 25.24 8.85 35.11 18.72 57.14 47.14 -22.03 -28.42 4 3.44613 9.98 14.37 5.59 24.35 15.57 56.00 46.00 -31.65 -30.43 5 5.36203 10.04 28.39 20.00 38.43 30.04 60.00 50.00 -21.57 -19.96 6 8.13813 10.11 16.12 0.71 26.23 10.82 60.00 50.00 -33.77 -39.18 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF190724C15 Page No. 31 / 33 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190724C15 Page No. 32 / 33 Report Format Version: 6.1.1

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF190724C15 Page No. 33 / 33 Report Format Version: 6.1.1


Document Created: 2019-08-27 19:03:00
Document Modified: 2019-08-27 19:03:00
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC