RF Exposure Info

FCC ID: K7SF7U085

RF Exposure Info

Download: PDF
FCCID_4193265

EK Access to the World MPE REPORT For Belkin International, Inc. Product name: Studio Qi Wireless Charger PAD Model No.: F7U085 Prepared for : Belkin International, Inc. Address : 12045 East Waterfront Dr., Playa Vista, California, 90094 United States Prepared by : SHENZHEN EMTEK CO., LTD. Address : Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China Tel: (0755) 26954280 Fax: (0755) 26954282 Report Number _: ES190115017W02 Date of Test : January 08, 2019 to January 30, 2019 Date of Report _: January 30, 2019 TRF NO. FCC15 C/A Page 1 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World TABLE OF CONTENT Test Report Description Page 1. SUMMARY OF TEST RESULT ........................................................................................................ 4 2. GENERAL INFORMATION ............................................................................................................... 5 2.1. DESCRIPTION OF DEVICE (EUT) .................................................................................................................................... 5 2.2. DESCRIPTION OF TEST FACILITY .................................................................................................................................... 6 2.3. MEASUREMENT UNCERTAINTY ....................................................................................................................................... 6 3. MEASURING DEVICE AND TEST EQUIPMENT ......................................................................... 7 3.1. FOR MPE MEASUREMENT ............................................................................................................................................. 7 4. RF EXPOSURE ................................................................................................................................... 7 4.1. MEASURING STANDARD.................................................................................................................................................. 8 4.2. REQUIMENTS .................................................................................................................................................................. 8 4.3. TEST CONFIGURATION .................................................................................................................................................... 9 4.4. LIMITS ........................................................................................................................................................................... 10 4.5. MEASURING RESULTS .................................................................................................................................................. 11 5. PHOTOGRAPHS OF TEST SETUP .............................................................................................. 16 TRF NO. FCC15 C/A Page 2 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World TEST REPORT DESCRIPTION Applicant : Belkin International, Inc. 12045 East Waterfront Dr., Playa Vista, California, 90094 United States Manufacturer : Belkin International, Inc. 12045 East Waterfront Dr., Playa Vista, California, 90094 United States Trade Mark : BELKIN EUT : Studio Qi Wireless Charger STAND Model No. : F7U085 Measurement Procedure Used: FCC Part 1(1.1310) and Part 2(2.1091) The device described above is tested by SHENZHEN EMTEK CO., LTD. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and SHENZHEN EMTEK CO., LTD. is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of SHENZHEN EMTEK CO., LTD. Date of Test : January 08, 2019 to January 30, 2019 Prepared by : Yaping Shen/Editor Reviewer : Jack Li/Supervisor Approve & Authorized Signer : Lisa Wang/Manager TRF NO. FCC15 C/A Page 3 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World 1. SUMMARY OF TEST RESULT EMISSION Description of Test Item Standard & Limits Results MPE FCC Part 1(1.1310) and Part 2(2.1091) Pass Note: N/A is an abbreviation for Not Applicable. TRF NO. FCC15 C/A Page 4 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World 2. GENERAL INFORMATION 2.1. Description of Device (EUT) EUT : Studio Qi Wireless Charger STAND Model Number : F7U085 Power Supply : AC 100-240V 50/60Hz 0.45A Max Adapter Model: W0920U-1U05F Input: AC 100-240V~50/60Hz,0.45mA Output: DC 3.6V-6V 3A, DC6V-9V 2A DC 9V-12V 1.5A Applicant : Belkin International, Inc. Address : 12045 East Waterfront Dr., Playa Vista, California, 90094 United States Manufacturer : Belkin International, Inc. Address : 12045 East Waterfront Dr., Playa Vista, California, 90094 United States Date of Received : January 08, 2019 Date of Test : January 08, 2019 to January 30, 2019 TRF NO. FCC15 C/A Page 5 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World 2.2. Description of Test Facility Site Description EMC Lab. : Accredited by CNAS, 2016.10.24 The certificate is valid until 2022.10.28 The Laboratory has been assessed and proved to be in compliance with CNAS-CL01:2006 (identical to ISO/IEC 17025:2005) The Certificate Registration Number is L2291. Accredited by TUV Rheinland Shenzhen 2016.5.19 The Laboratory has been assessed according to the requirements ISO/IEC 17025. Accredited by FCC, August 06, 2018 The certificate is valid until August 07, 2020 Designation Number: CN1204 Test Firm Registration Number: 882943 Accredited by Industry Canada, November 09, 2018 The Conformity Assessment Body Identifier is CN0008. Accredited by A2LA, July 31, 2017 The Certificate Number is 4321.01. Name of Firm : EMTEK (SHENZHEN) CO., LTD. Site Location : Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China 2.3. Measurement Uncertainty Radiated Emission Uncertainty : 3.3dB (30M~1GHz Polarize: H) 3.2dB (30M~1GHz Polarize: V) 3.7dB (1~18GHz Polarize: H) 3.6dB (1~18GHz Polarize: V) TRF NO. FCC15 C/A Page 6 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World 3. MEASURING DEVICE AND TEST EQUIPMENT 3.1. For MPE Measurement Used Equipment Manufacturer Model No. Serial No. Last Cal. Cal. Interval E-Field  Narda EF0391 2304/03 May 20, 2018 1 Year Probe(100kHz-3GHz)  Broadband Field Meter Narda NBM-550 232421 May 20, 2018 1 Year Exposure Level  Narda ELT-400 C-0012 May 20, 2018 1 Year Tester(1Hz-400KHz) TRF NO. FCC15 C/A Page 7 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World 4. RF EXPOSURE 4.1. Measuring Standard FCC Part 1(1.1310) and Part 2(2.1091) 4.2. Requiments Three different categories of transmitters are defined by the FCC in OET Bulletin 65. These categories are fixed installation, mobile, and portable and are defined as follows: o Fixed Installations: fixed location means that the device, including its antenna, is physically secured at a permanent location and is not able to be easily moved to another location. Additionally, distance to humans from the antenna is maintained to at least 2 meters. o Mobile Devices: a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to be generally used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structures and the body of the user or nearby persons. Transmitters designed to be used by consumers or workers that can be easily re-located, such as a wireless modem operating in a laptop computer, are considered mobile devices if they meet the 20 centimeter separation requirement. The FCC rules for evaluating mobile devices for RF compliance are found in 47 CFR §2.1091. o Portable Devices: a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. Portable device requirements are found in Section 2.1093 of the FCC's Rules (47 CFR§2.1093). The FCC also categorizes the use of the device as based upon the user’s awareness and ability to exercise control over his or her exposure. The two categories defined are Occupational/ Controlled Exposure and General Population/Uncontrolled Exposure. These two categories are defined as follows: Occupational/Controlled Exposure: In general, occupational/controlled exposure limits are applicable to situations in which persons are exposed as a consequence of their employment, who have been made fully aware of the potential for exposure and can exercise control over their exposure. This exposure category is also applicable when the exposure is of a transient nature due to incidental passage through a location where the exposure levels may be higher than the general population/uncontrolled limits, but the exposed person is fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate means. Awareness of the potential for RF exposure in a workplace or similar environment can be provided through specific training as part of a RF safety program. If appropriate, warning signs and labels can also be used to establish such awareness by providing prominent information on the risk of potential exposure and instructions on methods to minimize such exposure risks. General Population/Uncontrolled Exposure: The general population / uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Members of the general public would come under this category when exposure is not employment-related; for example, in the case of a wireless transmitter that exposes persons in its vicinity. Warning labels placed on low-power consumer devices such as cellular telephones are not considered sufficient to allow the device to be considered under the occupational/controlled category, and the general population/uncontrolled exposure limits apply to these devices. TRF NO. FCC15 C/A Page 8 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World 4.3. Test configuration 1, The field strength of both E-field and H-field was measured at 15cm(the 15 cm measured from the center of the probe(s) to the edge of the device) using the equipment list above for determining compliance with the MPE requirements of FCC Part 1.1310. 2, The RF power density was measured at 3 different charge conditions:. min load, mid load, max load. 3, Maximum E-field and H-field measurements were made 15cm from each side of the EUT. Along the side of the EUT and still 10cm away from the edge of the EUT, the field probes were positioned at the location where there is maximum field strength. The maximum E-field and H-field is reported below. 4, This device uses a wireless charging circuit for power transfer operating at the frequency of 111 – 205kHz. Thus, the 300kHz limits were used: E-field Limit = 614 (V/m); H-field limit = 1.63 (A/m). TRF NO. FCC15 C/A Page 9 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World 4.4. Limits Test Mode Description Remark 100% Load With resistor Mode A.1 90% Load With resistor Charging(10W RX Load operating at center) 50% Load With resistor 10% Load With resistor 100% Load With resistor Mode A.2 90% Load With resistor Charging(10W RX Load with 3mm airgap at center) 50% Load With resistor 10% Load With resistor Mode B Standby N/A TRF NO. FCC15 C/A Page 10 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World 4.5. Measuring Results Test Mode: Mode A.1(100% Load) Electric Field Emissions Test Position Measure Value (V/m) Limit(V/m) Top 2.45 614 Left 1.31 614 Right 1.25 614 Rear 1.40 614 Front 1.38 614 Bottom 1.98 614 Magnetic Field Emissions Test Position Measure Value (A/m) Limit(A/m) Top 0.0130 1.63 Left 0.0039 1.63 Right 0.0066 1.63 Rear 0.0026 1.63 Front 0.0024 1.63 Bottom 0.00110 1.63 Test Mode: Mode A.1(90% Load) Electric Field Emissions Test Position Measure Value (V/m) Limit(V/m) Top 2.56 614 Left 1.40 614 Right 1.55 614 Rear 1.62 614 Front 1.38 614 Bottom 1.89 614 Magnetic Field Emissions Test Position Measure Value (A/m) Limit(A/m) Top 0.0155 1.63 Left 0.0039 1.63 Right 0.0074 1.63 Rear 0.0034 1.63 Front 0.0036 1.63 Bottom 0.0086 1.63 TRF NO. FCC15 C/A Page 11 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World Test Mode: Mode A.1(50% Load) Electric Field Emissions Test Position Measure Value (V/m) Limit(V/m) Top 2.62 614 Left 1.59 614 Right 1.40 614 Rear 1.47 614 Front 1.30 614 Bottom 1.89 614 Magnetic Field Emissions Test Position Measure Value (A/m) Limit(A/m) Top 0.0123 1.63 Left 0.0037 1.63 Right 0.0060 1.63 Rear 0.0042 1.63 Front 0.0049 1.63 Bottom 0.0094 1.63 Test Mode: Mode A.1(10% Load) Electric Field Emissions Test Position Measure Value (V/m) Limit(V/m) Top 2.66 614 Left 1.38 614 Right 1.18 614 Rear 1.35 614 Front 1.26 614 Bottom 1.88 614 Magnetic Field Emissions Test Position Measure Value (A/m) Limit(A/m) Top 0.0128 1.63 Left 0.0038 1.63 Right 0.0061 1.63 Rear 0.0037 1.63 Front 0.0039 1.63 Bottom 0.0108 1.63 TRF NO. FCC15 C/A Page 12 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World Test Mode: Mode A.2(100% Load) Electric Field Emissions Test Position Measure Value (V/m) Limit(V/m) Top 2.35 614 Left 1.49 614 Right 1.38 614 Rear 1.62 614 Front 1.42 614 Bottom 1.99 614 Magnetic Field Emissions Test Position Measure Value (A/m) Limit(A/m) Top 0.0135 1.63 Left 0.0060 1.63 Right 0.0049 1.63 Rear 0.0038 1.63 Front 0.0027 1.63 Bottom 0.0096 1.63 Test Mode: Mode A.2(90% Load) Electric Field Emissions Test Position Measure Value (V/m) Limit(V/m) Top 2.49 614 Left 1.50 614 Right 1.38 614 Rear 1.34 614 Front 1.50 614 Bottom 1.87 614 Magnetic Field Emissions Test Position Measure Value (A/m) Limit(A/m) Top 0.0143 1.63 Left 0.0085 1.63 Right 0.0062 1.63 Rear 0.0044 1.63 Front 0.0038 1.63 Bottom 0.0102 1.63 TRF NO. FCC15 C/A Page 13 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World Test Mode: Mode A.2(50% Load) Electric Field Emissions Test Position Measure Value (V/m) Limit(V/m) Top 2.25 614 Left 1.29 614 Right 1.42 614 Rear 1.25 614 Front 1.27 614 Bottom 1.86 614 Magnetic Field Emissions Test Position Measure Value (A/m) Limit(A/m) Top 0.0155 1.63 Left 0.0061 1.63 Right 0.0044 1.63 Rear 0.0072 1.63 Front 0.0033 1.63 Bottom 0.0099 1.63 Test Mode: Mode A.2(10% Load) Electric Field Emissions Test Position Measure Value (V/m) Limit(V/m) Top 2.52 614 Left 1.26 614 Right 1.35 614 Rear 1.25 614 Front 1.46 614 Bottom 1.91 614 Magnetic Field Emissions Test Position Measure Value (A/m) Limit(A/m) Top 0.0151 1.63 Left 0.0037 1.63 Right 0.0041 1.63 Rear 0.0035 1.63 Front 0.0030 1.63 Bottom 0.0094 1.63 TRF NO. FCC15 C/A Page 14 of 16 Report No.: ES190115017W02 Rev.1.0

Access to the World Test Mode: Mode B-Standby Electric Field Emissions Test Position Measure Value (V/m) Limit(V/m) Top 2.51 614 Left 1.46 614 Right 1.42 614 Rear 1.49 614 Front 1.38 614 Bottom 1.83 614 Magnetic Field Emissions Test Position Measure Value (A/m) Limit(A/m) Top 0.0056 1.63 Left 0.0049 1.63 Right 0.0051 1.63 Rear 0.0047 1.63 Front 0.0033 1.63 Bottom 0.0056 1.63 Remark: The device meets the mobile RF exposure limit at a 15cm separation distance as specified in §2.1091 of the FCC Rules. The maximum leakage fields at 15 cm surrounding the device from all simultaneous transmitting coils are demonstrated to be less than 30% of the MPE limit. TRF NO. FCC15 C/A Page 15 of 16 Report No.: ES190115017W02 Rev.1.0


Document Created: 2019-03-07 18:04:31
Document Modified: 2019-03-07 18:04:31
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC