DTS test report 3

FCC ID: K7S-F6D3050

Test Report

Download: PDF
FCCID_523290

FCC ID: K7S-F6D3050 5.3 6dB BANDWIDTH MEASUREMENT 5.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 5.3.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until R&S SPECTRUM ANALYZER FSEK30 100049 Aug. 12, 2005 NOTES: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. Report No.: RF931207L04 103 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 5.3.3 TEST PROCEDURE The transmitter output was connected to the spectrum analyzer through an attenuator. The bandwidth of the fundamental frequency was measured by spectrum analyzer with 100kHz RBW and 100kHz VBW. The 6dB bandwidth is defined as the total spectrum the power of which is higher than peak power minus 6dB. 5.3.4 DEVIATION FROM TEST STANDARD No deviation 5.3.5 TEST SETUP SPECTRUM EUT ANALYZER 5.3.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF931207L04 104 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 5.3.7 TEST RESULTS 802.11a OFDM modulation EUT Wireless A/G USB Adapter MODEL F6D3050 MODULATION BPSK TRANSFER RATE 6Mbps TYPE INPUT POWER ENVIRONMENTAL 24deg. C, 64%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 991 hPa TESTED BY Leo Hung CHANNEL FREQUENCY 6dB BANDWIDTH MINIMUM LIMIT CHANNEL PASS/FAIL (MHz) (MHz) (MHz) 1 5745 16.47 0.5 PASS 3 5785 16.41 0.5 PASS 5 5825 16.47 0.5 PASS Report No.: RF931207L04 105 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 CH 1 CH 3 Report No.: RF931207L04 106 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 CH 5 Report No.: RF931207L04 107 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 802.11a Turbo OFDM modulation EUT Wireless A/G USB Adapter MODEL F6D3050 MODULATION BPSK TRANSFER RATE 12Mbps TYPE INPUT POWER ENVIRONMENTAL 24deg. C, 64%RH, 120Vac, 60 Hz CONDITIONS (SYSTEM) 991 hPa TESTED BY Leo Hung CHANNEL FREQUENCY 6dB BANDWIDTH MINIMUM LIMIT CHANNEL PASS/FAIL (MHz) (MHz) (MHz) 1 5760 32.71 0.5 PASS 2 5800 32.63 0.5 PASS Report No.: RF931207L04 108 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 CH1 CH2 Report No.: RF931207L04 109 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 5.4 MAXIMUM PEAK OUTPUT POWER 5.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT The Maximum Peak Output Power Measurement is 30dBm. 5.4.2 INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until R&S SPECTRUM ANALYZER FSEK30 100049 Aug. 12, 2005 AGILENT SIGNAL E8257C MY43320668 Dec. 06, 2005 GENERATOR TEKTRONIX OSCILLOSCOPE TDS 1012 C019167 Feb. 01, 2005 NARDA DETECTOR 4503A FSCM99899 NA NOTE: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA.. Report No.: RF931207L04 110 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 5.4.3 TEST PROCEDURES 1. A detector was used on the output port of the EUT. An oscilloscope was used to read the response of the detector. 2. Replaced the EUT by the signal generator . The center frequency of the S.G was adjusted to the center frequency of the measured channel. 3. Adjusted the power to have the same reading on oscilloscope. Record the power level. 5.4.4 DEVIATION FROM TEST STANDARD No deviation 5.4.5 TEST SETUP OSCILLOSCOPE DETECTOROR EUT or S.G 5.4.6 EUT OPERATING CONDITIONS Same as Item 5.9.6 Report No.: RF931207L04 111 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 5.4.7 TEST RESULTS 802.11a OFDM modulation EUT Wireless A/G USB Adapter MODEL F6D3050 MODULATION BPSK TRANSFER RATE 6Mbps TYPE INPUT POWER ENVIRONMENTAL 24deg. C, 64%RH, 120Vac, 60 Hz CONDITIONS (SYSTEM) 991 hPa TESTED BY Leo Hung PEAK PEAK PEAK CHANNEL POWER POWER POWER CHANNEL FREQUENCY PASS/FAIL OUTPUT OUTPUT LIMIT (MHz) (mW) (dBm) (dBm) 1 5745 31.989 15.05 30 PASS 3 5785 20.512 13.12 30 PASS 5 5825 12.912 11.11 30 PASS Report No.: RF931207L04 112 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 802.11a Turbo OFDM modulation EUT Wireless A/G USB Adapter MODEL F6D3050 MODULATION BPSK TRANSFER RATE 12Mbps TYPE INPUT POWER ENVIRONMENTAL 24deg. C, 64%RH, 120Vac, 60 Hz CONDITIONS (SYSTEM) 991 hPa TESTED BY Leo Hung PEAK PEAK PEAK CHANNEL POWER POWER POWER CHANNEL FREQUENCY PASS/FAIL OUTPUT OUTPUT LIMIT (MHz) (mW) (dBm) (dBm) 1 5760 25.704 14.10 30 PASS 2 5800 31.989 15.05 30 PASS Report No.: RF931207L04 113 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 5.5 POWER SPECTRAL DENSITY MEASUREMENT 5.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT The Maximum of Power Spectral Density Measurement is 8dBm. 5.5.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until R&S SPECTRUM ANALYZER FSEK30 100049 Aug. 12, 2005 NOTES: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. Report No.: RF931207L04 114 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 5.5.3 TEST PROCEDURE The transmitter output was connected to the spectrum analyzer through an attenuator, the bandwidth of the fundamental frequency was measured with the spectrum analyzer using 3 kHz RBW and 30 kHz VBW, set sweep time = span/3 kHz. The power spectral density was measured and recorded. The sweep time is allowed to be longer than span/3 kHz for a full response of the mixer in the spectrum analyzer. 5.5.4 DEVIATION FROM TEST STANDARD No deviation 5.5.5 TEST SETUP EUT SPECTRUM ANALYZER 5.5.6 EUT OPERATING CONDITION Same as Item 5.9.6 Report No.: RF931207L04 115 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 5.5.7 TEST RESULTS 802.11a OFDM modulation EUT Wireless A/G USB Adapter MODEL F6D3050 MODULATION BPSK TRANSFER RATE 6Mbps TYPE INPUT POWER ENVIRONMENTAL 24deg. C, 64%RH, 120Vac, 60 Hz CONDITIONS (SYSTEM) 991 hPa TESTED BY Leo Hung CHANNEL RF POWER LEVEL MAXIMUM CHANNEL FREQUENCY IN 3 kHz BW LIMIT PASS/FAIL (MHz ) (dBm) (dBm) 1 5745 -13.18 8 PASS 3 5785 -16.61 8 PASS 5 5825 -17.58 8 PASS Report No.: RF931207L04 116 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 CH1 CH3 Report No.: RF931207L04 117 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 CH5 Report No.: RF931207L04 118 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 802.11a Turbo OFDM modulation EUT Wireless A/G USB Adapter MODEL F6D3050 MODULATION BPSK TRANSFER RATE 12Mbps TYPE INPUT POWER ENVIRONMENTAL 24deg. C, 64%RH, 120Vac, 60 Hz CONDITIONS (SYSTEM) 991 hPa TESTED BY Leo Hung CHANNEL RF POWER LEVEL MAXIMUM CHANNEL FREQUENCY IN 3 kHz BW LIMIT PASS/FAIL (MHz ) (dBm) (dBm) 1 5760 -14.28 8 PASS 2 5800 -13.57 8 PASS Report No.: RF931207L04 119 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 CH1 CH2 Report No.: RF931207L04 120 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 5.6 BAND EDGES MEASUREMENT 5.6.1 LIMITS OF BAND EDGES MEASUREMENT Below –20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 5.6.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until R&S SPECTRUM ANALYZER FSEK30 100049 Aug. 12, 2005 NOTES: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 5.6.3 TEST PROCEDURE The transmitter output was connected to the spectrum analyzer via a low lose cable. Set both RBW and VBW of spectrum analyzer to 100 kHz with suitable frequency span including 100 MHz bandwidth from band edge. The band edges was measured and recorded. 5.6.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF931207L04 121 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 5.6.5 EUT OPERATING CONDITION Same as Item 5.9.6 5.6.6 TEST RESULTS The spectrum plots are attached on the following pages. D2 line indicates the highest level, D1 line indicates the 20dB offset below D2. It shows compliance with the requirement in part 15.247(d). Report No.: RF931207L04 122 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 802.11a OFDM modulation Report No.: RF931207L04 123 Report Format Version 2.0.2

so IL{;'\' @ner i "*" CWhes en dn i ha VC * like maceyr 2i 6e Size is oiz & y x—=ag————=x "T—1T"— ] NHrs=e:" Coner s nsnzmies mne T me n ame 1 senzos

0 y uie 20 se« renzor

FCC ID: K7S-F6D3050 802.11a Turbo OFDM modulation Report No.: RF931207L04 126 Report Format Version 2.0.2

io ,@Y m mm. mo ar wot so ce sostos one sut s Lor rick ase. wieu in 2 lancsn Ine eronninm Fr ce tmm e &. T as ane scrermise on (9 sut *" x 2l weforo af is ced Sln> — * Comer scar on 3 m Tomse me senzos

» cim kess um n ait 30 n ohide BS W 2% uare 2 ane "[! fsmsafinc alin adhes on a af e |—_] En same e U (bos ich in wies im wreoe

FCC ID: K7S-F6D3050 5.7 ANTENNA REQUIREMENT 5.7.1 STANDARD APPLICABLE For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. And according to FCC 47 CFR Section 15.247(a), if transmitting antennas of directional gain greater than 6dBi are used, the power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6dBi. 5.7.2 ANTENNA CONNECTED CONSTRUCTION The antenna used in this product is Printed antenna without antenna connector. The maximum Gain of the antenna is 2.9dBi. Report No.: RF931207L04 129 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 6. PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Test Mode 1 Report No.: RF931207L04 130 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 Test Mode 2 Report No.: RF931207L04 131 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 RADIATED EMISSION TEST Test Mode 1 Report No.: RF931207L04 132 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 Test Mode 2 Report No.: RF931207L04 133 Report Format Version 2.0.2

FCC ID: K7S-F6D3050 7. INFORMATION ON THE TESTING LABORATORIES We, ADT Corp., were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025. USA FCC, NVLAP, UL, A2LA Germany TUV Rheinland Japan VCCI Norway NEMKO Canada INDUSTRY CANADA , CSA R.O.C. CNLA, BSMI, DGT Netherlands Telefication Singapore PSB , GOST-ASIA(MOU) Russia CERTIS(MOU) Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26052943 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Telecom Lab: Linko RF Lab. Tel: 886-3-3183232 Tel: 886-3-3270910 Fax: 886-3-3185050 Fax: 886-3-3270892 Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also Report No.: RF931207L04 134 Report Format Version 2.0.2


Document Created: 2005-02-10 00:17:51
Document Modified: 2005-02-10 00:17:51
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC