Test Report

FCC ID: K66FT-1500M

Test Report

Download: PDF
FCCID_78525

FCC ID: K66FT-1500M Date: December 28, 1999 Applicant: Yaesu Musen Co., Ltd. 20-2, Shimomaruko 1-chome Ota-ku Tokyo, Japan 146 Attention of: H. Edo, Export Manager Mailing: Yaesu U.S.A. 17210 Edwards Rd. Cerritos, CA 90703 Attention of: Mikio Maruya, Executive Vice President (800) 255-9237; FAX: (800) 477-9237 (562) 404-2700, x280; FAX: -1210 Equipment: FT-1500M FCC ID: K66FT-1500M P.O. Number: UPS/FAX 12/23/99 FCC Rules: Part 15, Subpart B. RECEIVER CERTIFICATION Gentlemen: Enclosed herewith please find your copies of the Application Form, Test Data Report and covering letter to the FCC, the whole for approval of the reference equipment as shown. Please allow from 6-8 weeks to hear from the Commission, who may request additional data or information, and even a sample for pre-grant audit testing. In the meantime, you are subject to the restrictions as listed on the attached summary. If your equipment is still retained by us, it will be returned to you shortly via U.P.S. Our invoice for services has been directed to your Accounts Payable Department, with a copy included here for your file. Should you have any questions, please do not hesitate to call. Sincerely yours, William H. Graff, Director of Engineering enclosure(s) WHG/cvr MFA p99c0020, d99c0067

FCC ID: K66FT-1500M SUMMARY OF RESTRICTIONS 1. All submissions to the FCC are subject to their Examiner's interpretation. 2. Please allow from 60 to 90 days before hearing from the FCC with regard to any submission. 3. The FCC can set aside any action; modify or set aside any action, within 30 days. (FCC Rule 1.108, 1.113). 4. Under Rule 2.803, if device is not certified then it must NOT be sold, leased, offered for sale, imported, shipped or distributed or advertised for sale. 5. FCC can revoke its certificates at any time if the equipment does not meet or CONTINUE to meet their Rules. (Rule Parts 2.927, 2.939). 6. FCC can request a sample at any time (2.936). M. FLOM ASSOCIATES, INC. William H. Graff, Director of Engineering MFA p99c0020, d99c0067

FCC ID: K66FT-1500M Date: December 28, 1999 Federal Communications Commission Via: Electronic Filing Attention: Authorization & Evaluation Division Applicant: Yaesu Musen Co., Ltd. Equipment: FT-1500M FCC ID: K66FT-1500M FCC Rules: 15.109 Gentlemen: On behalf of the Applicant, enclosed please find Application Form 731, Engineering Test Report and all pertinent documentation, the whole for approval of the referenced equipment as shown. Filing fees are attached. We trust the same is in order. Should you need any further information, kindly contact the writer who is authorized to act as agent. Sincerely yours, William H. Graff, Director of Engineering enclosure(s) cc: Applicant WHG/cvr MFA p99c0020, d99c0067

FCC ID: K66FT-1500M C E R T I F I C A T I O N of RECEIVER MODEL: FT-1500M FCC ID: K66FT-1500M to FEDERAL COMMUNICATIONS COMMISSION Part 15(B) (New) DATE OF REPORT: December 28, 1999 ON THE BEHALF OF THE APPLICANT: Yaesu Musen Co., Ltd. AT THE REQUEST OF: P.O. UPS/FAX 12/23/99 Yaesu U.S.A. 17210 Edwards Rd. Cerritos, CA 90703 Attention of: Mikio Maruya, Executive Vice President (800) 255-9237; FAX: (800) 477-9237 (562) 404-2700, x280; FAX: -1210 SUPERVISED BY: William H. Graff, Director of Engineering MFA p99c0020, d99c0067

FCC ID: K66FT-1500M TABLE OF CONTENTS RULE DESCRIPTION PAGE 2.948 Description of Measurement Facilities 1 15.109 Receiver Spurious Emissions (Radiated) 6 15.121(b) Scanning Receiver 9 MFA p99c0020, d99c0067

FCC ID: K66FT-1500M PAGE NO. 1 of 10. Required information per ISO/IEC Guide 25-1990, paragraph 13.2: a) TEST REPORT b) Laboratory: M. Flom Associates, Inc. (FCC: 31040/SIT) 3356 N. San Marcos Place, Suite 107 (Canada: IC 2044) Chandler, AZ 85225 c) Report Number: d99c0067 d) Client: Yaesu U.S.A. 17210 Edwards Rd. Cerritos, CA 90703 e) Identification: FT-1500M FCC ID: K66FT-1500M Description: Amateur Scanning Receiver f) EUT Condition: Not required unless specified in individual tests. g) Report Date: December 28, 1999 EUT Received: December 23, 1999 h, j, k): As indicated in individual tests. i) Sampling method: No sampling procedure used. l) Uncertainty: In accordance with MFA internal quality manual. m) Supervised by: William H. Graff, Director of Engineering n) Results: The results presented in this report relate only to the item tested. o) Reproduction: This report must not be reproduced, except in full, without written permission from this laboratory. MFA p99c0020, d99c0067

FCC ID: K66FT-1500M PAGE NO. 2 of 10. M. Flom Associates, Inc. is accredited by the American Association for Laboratory Association (A2LA) as shown in the scope below. "This laboratory is accredited by the American Association for Laboratory Accreditation (A2LA) and the results shown in this report have been determined in accordance with the laboratory's terms of accreditation unless stated otherwise in the report." Should this report contain any data for tests for which we are not accredited, or which have been undertaken by a subcontractor that is not A2LA accredited, such data would not covered by this laboratory's A2LA accreditation. MFA p99c0020, d99c0067

FCC ID: K66FT-1500M PAGE NO. 3 of 10. GENERAL INFORMATION Part 2.948: (a)(b) DESCRIPTION OF MEASUREMENT FACILITIES: FILE: 31040/SIT A description of the measurement facilities was filed with the Commission and was found to be in compliance with the requirements of Section 2.948, by letter dated March 3, 1997. All pertinent changes will be reported to the Commission by up-date prior to March 2000. (b)(4) SUPPORTING STRUCTURES: SKETCH - ATTACHED EXHIBITS (b)(5)(6) TEST INSTRUMENTATION: LIST - SEE EXHIBITS 2.925: IDENTIFICATION OF AN AUTHORIZED DEVICE: DRAWING - SEE EXHIBITS LOCATION OF LABEL - SEE PHOTOS NAME AND ADDRESS OF APPLICANT: Yaesu Musen Co., Ltd. 20-2, Shimomaruko 1-chome Ota-ku Tokyo, Japan 146 MFA p99c0020, d99c0067

FCC ID: K66FT-1500M PAGE NO. 4 of 10. 2.911: 2.1033(b)(6) TECHNICAL REPORT MANUFACTURER: Applicant TRADE NAME: Yaesu FCC ID: K66FT-1500M MODEL NO: FT-1500M PHOTOGRAPHS: SEE LIST OF EXHIBITS 15.31: MEASUREMENT STANDARD & PROCEDURE: IEEE STANDARD 187 WAS USED AS A GUIDE. FCC MEASUREMENT PROCEDURE MP-1 x FCC RULE PART 15(B) (NEW) MFA p99c0020, d99c0067

FCC ID: K66FT-1500M PAGE NO. 5 of 10. EXPOSITORY STATEMENT 1. NUMBER OF BANDS = 1 2. NUMBER OF CHANNELS = 120 3. TUNING RANGE, MHz = 137 to 174 4. OSCILLATOR RANGE, MHz = 115.3 to 152.3 5. I.F., MHz = 21.7 6. BLOCK DIAGRAM = ATTACHED 7. For cellular receiver only, the radio transceiver meets the requirements of FCC Bulletin OET 53 ("Cellular System Mobile Stations-Land-System Compatibility Specification."). See attached affidavit. 15.203: ANTENNA REQUIREMENT: The antenna is permanently attached to the EUT The antenna uses a unique coupling The EUT must be professionally installed x The antenna requirement does not apply SUPERVISED BY: William H. Graff, Director of Engineering MFA p99c0020, d99c0067

FCC ID: K66FT-1500M PAGE NO. 6 of 10. NAME OF TEST: Receiver Spurious Emissions (Radiated) SPECIFICATION: 15.109: Radiated Interference Limits 15.33: Frequency Range of Radiated Measurements 80.217: Suppression of Interference Aboard Ships GUIDE: See measurement procedure below TEST CONDITIONS: Standard Temperature & Humidity TEST EQUIPMENT: As per attached page SEARCH ANTENNAS: 100 Hz - 50 MHz: Emco 3301B Active Rod 10 kHz - 32 MHz: Singer 94593-1 Loop 25 MHz - 300 MHz: Emco 3109 Biconical 200 MHz - 1 GHz: Aprel 2001 Log Periodic 1 GHz - 18 GHz: Emco 3115 Horn 10 GHz - 40 GHz: Emco 3116 Horn with HP11970A Mixer MEASUREMENT PROCEDURE 1. At first, bench tests were performed to locate the spurious emissions at the antenna terminals. 2. In the field, tests were conducted over the range shown, The test sample was set up on a wooden turntable above ground, and at a distance of three meters from the antenna connected tot he Spectrum Analyzer. 3. In order to obtain the maximum response at each frequency, the turntable was rotated, and the search antenna was raised and lowered. The EUT was also adjusted for maximum response. Tests were conducted in Horizontal & Vertical polarization modes. 4. The field strength was calculated from: E µV/m @ 3 m = Log10-1(dBµV + A.F. + C.L.) 20 5. MEASUREMENT RESULTS: Attached for "Worst Case" conditions. MFA p99c0020, d99c0067

FCC ID: K66FT-1500M PAGE NO. 7 of 10. RADIATED TEST SETUP NOTES: (a)Search Antenna - Rotatable on (j)Cables routed through hollow boom turntable center (b) Non-metallic boom (k)30 cm or less (c) Non-metallic mast (l)External power source (d) Adjustable horizontally (m)10 cm diameter coil of excess (e) Equipment Under Test cable (f) Turntable (n)25 cm (V), 1 m-7 m (V, H) (g) Boom adjustable in height. (o)25 cm from bottom end of 'V', (h) External control cables routed 1m normally horizontally at least one (p)Calibrated Cable at least 10m wavelength. in length (i) Rotatable (q)Amplifier (optional) (r)Spectrum Analyzer Asset Description s/n Cycle Last Cal (as applicable) Per ANSI C63.4-1992, 10.1.4 TRANSDUCER i00088 EMCO 3109-B 25MHz-300MHz 2336 12 mo. Sep-99 i00089 Aprel 2001 200MHz-1GHz 001500 12 mo. Sep-99 i00103 EMCO 3115 1GHz-18GHz 9208-3925 12 mo. Sep-99 i00065 EMCO 3301-B Active Monopole 2635 12 mo. Sep-99 AMPLIFIER i00028 HP 8449A 2749A00121 12 mo. Mar-99 SPECTRUM ANALYZER i00029 HP 8563E 3213A00104 12 mo. Aug-99 i00033 HP 85462A 3625A00357 12 mo. May-99 i00048 HP 8566B 2511AD1467 6 mo. May-99 MFA p99c0020, d99c0067

FCC ID: K66FT-1500M PAGE NO. 8 of 10. NAME OF TEST: Receiver Spurious Emissions (Radiated) MEASUREMENT DETAILS SITE REFERENCE = 31040/SIT SPECTRUM SEARCHED = 0 to 10 x FR WORST CASE = V LIMITS = 15.109(a) (Attached) ALL OTHER EMISSIONS = 20 dB OR MORE BELOW LIMIT TESTS WERE CONDUCTED WITH: a. All controls and switches operated. b. Half-wave dipole antenna or manufacturer/applicant supplied antenna. SAMPLE CALCULATION: EMISSION FREQUENCY, MHz = 115.324980 LEVEL = Log10-1 (_7.5_+ 13.84 ) 20 LEVEL, µV/m @ 3m = 11.67 MEASUREMENT RESULTS = ATTACHED NOTE: WORST CASE OF SCAN AND NON-SCAN MODES REPORTED. NAME OF TEST: Receiver Spurious Emissions (Radiated) g99c0304: 1999-Dec-23 Thu 11:23:00 STATE: 0:General All other emissions in the required measurement range were more that 20 dB below the required limits. FREQUENCY FREQUENCY LEVEL, @ m C.F., µV/m @ m TUNED, MHz EMISSION, MHz dBuV dB 137.025000 115.324980 7.5 3 13.84 11.67 3 155.525000 133.824960 10.2 3 14.89 17.97 3 173.975000 152.274920 15.5 3 15.35 34.87 3 137.025000 230.650000 2.9 3 17.15 10.06 3 155.525000 267.649580 9.2 3 17.86 22.54 3 173.975000 304.549870 10 3 18.5 26.61 3 MFA p99c0020, d99c0067

FCC ID: K66FT-1500M PAGE NO. 9 of 10. NAME OF TEST: Scanning Receivers and Frequency Converters Used With Scanning Receivers SPECIFICATION: FCC: 47 CFR 15.121(b) GUIDE: See Measurement Procedure Below TEST CONDITIONS: S. T. & H. TEST EQUIPMENT: As per attached page GUIDE: 47 CFR 15.121(b): Except as provided in paragraph (c) of this section, scanning receivers shall reject any signals from Cellular Radiotelephone Service frequency bands that are 38 dB or higher based upon a 12 dB SINAD measurement, which is considered the threshold where a signal can be clearly discerned from any interference that may be present. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. MEASUREMENT PROCEDURE 1. A search for all potential spurious responses was begun by setting a signal generator at a level of -47 dBm to each of three frequencies in the subscriber transmit and base transmit bands. 2. The EUT was then set to scan across it's entire receive band. The most sensitive of each spurious response was noted. 3. The equipment was connected as illustrated. A second radio frequency signal generator (unwanted signal source) was connected to the appropriate matching network. 4. In absence of the unwanted signal, the standard input signal was applied to the combining network. Its level was varied to obtain reference sensitivity. This level is PREF. 5. The level of wanted input signal was increased by 3dB. 6. A high-level unwanted input signal, modulated with 400 Hz at 60% of the maximum permissible frequency deviation was connected to the combining network. 7. The unwanted signal frequency was varied over a range from 824-849 and 869-894 MHz, to search for degradation of the SINAD. When a response was found, the frequency of the unwanted signal was adjusted to maximize the degradation. 8. At the frequency of each spurious response the level of unwanted input signal was varied until the standard SINAD value obtained. The frequency of the unwanted signal and its level was recorded as PSPUR. 9. Calculate the spurious response rejection for each frequency concerned as follows: Spurious Response Rejection = PSPUR - PREF MFA p99c0020, d99c0067

FCC ID: K66FT-1500M PAGE NO. 10 of 10. SCANNING RECEIVER: RF Signal Distortion Generator Meter RF RF Signal Receiver Combining Audio Load Generator Under Test Network TEST RESULTS: DISPLAYED IMAGE PREF PSPUR REJECTION FREQUENCY FREQUENCY (dBm) (dBm) (dB) 151.34 824.04 -104 -5 -99 163.7 836.40 -104 -8 -96 154.57 848.97 -112 -5 -107 152.94 869.04 -110 -3 -107 165.30 881.4 -107 +10 -117 156.17 893.97 -105 +3 -108 SUPERVISED BY: William H. Graff, Director of Engineering MFA p99c0020, d99c0067

FCC ID: K66FT-1500M THE APPLICANT HAS BEEN CAUTIONED AS TO THE FOLLOWING: 15.21 INFORMATION TO USER. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.27(a) SPECIAL ACCESSORIES. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. MFA p99c0020, d99c0067

FCC ID: K66FT-1500M LIMITS: RULE 15.109(a): RECEIVER RADIATED EMISSION LIMITS _________________________________________________________________ FREQUENCY, MHz FIELD STRENGTH, µV/m DISTANCE, m _________________________________________________________________ 30 - 88 100 3 88 - 216 150 3 216 - 960 200 3 Above 960 500 3 LIMITS: RULE 15.111: RECEIVER CONDUCTED EMISSION LIMITS The power at the antenna terminal at any frequency within the range of measurements shall not exceed 2.0 nanowatts. MFA p99c0020, d99c0067

FCC ID: K66FT-1500M STATEMENT OF COMPLIANCE THIS IS TO CERTIFY: THAT, ON THE BASIS OF THE MEASUREMENTS MADE, THE EQUIPMENT TESTED IS CAPABLE OF COMPLYING WITH THE REQUIREMENTS OF FCC RULE PART 15, SUBPART B x_ FCC RULE PART 15, SUBPART C ___ USING ANSI C63.4-1992 IN EFFECT AS OF THIS DATE, UNDER NORMAL OPERATION, WITH THE USUAL MAINTENANCE. THAT THE DATA CONTAINED HEREIN IS A SUMMARY (WORST CASE) OF THAT OBTAINED ON SEVERAL RANDOMLY-SELECTED PRODUCTION SAMPLES. THA T THE EQUIPMENT MEETS OR EXCEEDS THE REQUIREMENTS OF PART 15. MFA p99c0020, d99c0067

FCC ID: K66FT-1500M LIST OF EXHIBITS (FCC CERTIFICATION (RECEIVERS) - REVISED 9/28/98) APPLICANT: Yaesu Musen Co., Ltd. EQUIPMENT: FT-1500M K66FT-1500M BY APPLICANT: IF APPLICABLE: Subsection 2.1033 1. LETTER OF AUTHORIZATION 2. ATTESTATION 3. IDENTIFICATION LABEL DRAWING LABEL LOCATION OF LABEL COMPLIANCE STATEMENT LOCATION OF COMPLIANCE STATEMENT 4. DOCUMENTATION: 2.1033(b) (3) USER MANUAL (4) OPERATIONAL DESCRIPTION (5) BLOCK DIAGRAM (5) SCHEMATIC DIAGRAM (7) PHOTOGRAPHS BY M.F.A. INC. A. STATEMENT OF COMPLIANCE B. STATEMENT OF QUALIFICATIONS MFA p99c0020, d99c0067


Document Created: 2019-07-06 19:33:27
Document Modified: 2019-07-06 19:33:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC