Operating Manual 75_80

FCC ID: K6630633X30

Users Manual

Download: PDF
FCCID_3849296

12.2.1 Setting Up Routing Directory NOTE All the destinations and via-points must be programmed as waypoints in the HX890 memory. Refer to section “12.1.2 Setting Up Waypoint Directory”. Adding a Route Press and hold WAYPOINT SETUP SELECT ROUTE DIR. SELECT     key ( / key) ( key) ( / key) ( key) 1. Select “ADD” with the CH▼/CH▲ key, then WAYPOINT SETUP ROUTE DIR. press the [SELECT] soft key. ADD EDIT 2. Select “NAME” with the CH▼/CH▲ key, then DELETE ROUTE DIR. press the [SELECT] soft key. NAME: 001RTE---------- 3. Enter a name for the route by pressing the BACK SELECT ROUTE SAVE CH▼/CH▲ key and the [SELECT] soft key. When the name entry is complete, press the BACK SELECT [FINISH] soft key. 4. Select “ROUTE” with the CH▼/CH▲ key, ROUTE DIR. NAME: press the [SELECT] soft key. 001RUT---------- ROUTE 5. Select “WPT” with the CH▼/CH▲ key, then SAVE 001RUT__________ press the [SELECT] soft key. WPT: Via1: 6. Press the CH▼/CH▲ key to select a BACK SELECT ROUTE DIR. DISPLAY RANGE ARRIVED RANGE waypoint, then press the [SELECT] soft key. ROUTE DIR. ROUTING OPERATION YAESU 7. Select “Via1” with the CH▼/CH▲ key, then 366901254 BOB BACK SELECT press the [SELECT] soft key. Horizon-1 Horizon-2 001RUT__________ 8. Press the CH▼/CH▲ key to select a KAREN Standard WPT:KAREN Via1: USCG waypoint, then press the [SELECT] soft key. BACK SELECT ROUTE DIR. DISPLAY RANGE ARRIVED RANGE 9. Repeat steps 7 and 8 to add more “Via…” ROUTE DIR. ROUTING OPERATION NAME: waypoints. 001RUT---------- BACK SELECT ROUTE 10. Press the [BACK] soft key. SAVE 11. Select “SAVE” with the CH▼/CH▲ key, then press the [SELECT] soft key to store the BACK SELECT route into memory. 12. Press the CLR key to return to radio operation. 75

Editing a Route This function allows a previously entered route to be edited. Press and hold WAYPOINT SETUP SELECT ROUTE DIR. SELECT     key ( / key) ( key) ( / key) ( key) 1. Select “EDIT” with the CH▼/CH▲ key, then WAYPOINT SETUP ROUTE DIR. press the [SELECT] soft key. ADD EDIT 2. Press the CH▼/CH▲ key to select the route DELETE ROUTE DIR. to be edited, then press the [SELECT] soft EDIT 366901254 key to show the route input display. BACK SELECT BOB Horizon-1 3. Perform steps 2 to 10 of the previous page ROUTE DIR. Horizon-2 KAREN NAME: Standard until the route is updated. KAREN---------- USCG ROUTE BACK SELECT 4. Select “SAVE” with the CH▼/CH▲ key, then SAVE press the [SELECT] soft key to store the edited route into memory. BACK SELECT 5. Press the CLR key to return to radio operation. Deleting a Route Press and hold WAYPOINT SETUP SELECT ROUTE DIR. SELECT     key ( / key) ( key) ( / key) ( key) 1. Select “DELETE” with the CH▼/CH▲ key, WAYPOINT SETUP ROUTE DIR. then press the [SELECT] soft key. ADD EDIT 2. Press the CH▼/CH▲ key to select the route DELETE ROUTE DIR. to be deleted, then press the [SELECT] soft DELETE 366901254 key. BACK SELECT BOB Horizon-1 3. Confirm the route to be deleted, select “OK” DELETE Horizon-2 KAREN NAME: Standard with the CH▼/CH▲ key, then press the KAREN------------ USCG WPT: BACK SELECT [SELECT] soft key. 001WPT CANCEL OK BACK SELECT 4. Press the CLR key to return to radio operation. 12.2.2 Starting and Stopping Route Navigation Press SELECT ROUTE SELECT     key ( / / / key) ( key) ( / key) ( key) 76

1. Select the desired category (“HISTORY” or ROUTE HISTORY “MEMORY”), then press the [SELECT] soft MEMORY key. ROUTE 2. Press the CH▼/CH▲ key to select a route, KAREN HISTORY then press the [SELECT] soft key. The navi- BACK SELECT BOB 366901254 Horizon-1 gation screen with “RTE” indicator appears. BUSY USA HI Standard 3. A message “ARRIVED” will appear when RTE 25 DW-16 Horizon-2 USCG BRG BACK SELECT you have reached the first target point. T 300° DST km 35.2 To start navigation to the next target, press N-UP SOG 20nm 36.0 kph the [YES] soft key. WPT KAREN 4. To stop the navigation, press ◄/►key, then press the [STOP] soft key. 5. Press the CLR key to return to radio operation. 12.2.3 Changing the Destination 1. On the navigation screen, press soft key, BUSY USA HI then press the [NEXT TG] soft key. RTE 25 DW-16 BRG T 2. Press the CH▼/CH▲ key to select the 300° DSTkm 35.2 ROUTE desired destination. SOGkph TARGET WPT:KAREN N-UP 20nm 36.0 3. Press the [ENTER] soft key. The navigation STOP NEXT TG FUNC Via1:001WPT Via2:002WPT DISPLAY RANGE screen with a new destination appears. BUSY USA HI 25 ARRIVED RANGE RTE ROUTING OPERATION DW-16 BRG T BACK ENTER 300° DSTkm 25.2 SOGkph N-UP 20nm 36.0 Via2 002WPT 12.2.4 Selecting Automatic or Manual Routing Use this selection to start navigation to the next target automatically or manu- ally when your vessel has arrived at a target point. Press and hold WAYPOINT SETUP SELECT ROUTING OPERATION SELECT     key ( / key) ( key) ( / key) ( key) 1. Select “AUTO” or “MANUAL” with the CH▼/CH▲ key, then WAYPOINT SETUP ROUTING OPERATION press the [ENTER] soft key. AUTO MANUAL 2. Press the CLR key to return to radio operation. BACK ENTER 77

13. GM OPERATION The GM (Group Monitor) feature of the HX890 utilizes the same system as the DSC Group call and Auto Position Polling, to display the group members' locations. 13.1 SETTING UP GM OPERATION The HX890 is capable of storing up to 10 groups with 1 to 9 members each. 13.1.1 Setting Up Group Directory NOTE ● For this function to operate, the same group MMSI must be programmed into each transceiver of group members to be moni- tored. Refer to section “11.6.1 Setting up a Group Call” for details. ● Group members for GM operation can only be selected from the Individual/Position Call directory, therefore all members that you want to monitor must be stored in the directory. Refer to section “11.5.1 Setting up the Individual Call Directory” for details. Press and hold GM SETUP SELECT GM GROUP DIR. SELECT     key ( / key) ( key) ( / key) ( key) 1. Select “ADD” with the CH▼/CH▲ key, then GM SETUP GM GROUP DIR. press the [SELECT] soft key. ADD EDIT 2. Select “NAME” with the CH▼/CH▲ key, then DELETE GM GROUP DIR. press the [SELECT] soft key. NAME: ----------------- 3. Enter a name for the route by pressing the BACK SELECT GM ID: 0-------- CH▼/CH▲ key and the [SELECT] soft key. MEMBER When finished entering the name, press the SAVE BACK SELECT [FINISH] soft key. 4. Select “GM ID” with the CH▼/CH▲ key, press the [SELECT] soft key, then enter the group MMSI number. When finished entering the MMSI, press the [FINISH] soft key. 78

5. Select “MEMBERS” with the CH▼/CH▲ key, GM GROUP DIR. then press the [SELECT] soft key. NAME: STANDARD--------- 6. Press the CH▼/CH▲ key to select a list GM ID: 087654321 GM GROUP DIR. number, then press the [SELECT] soft key. MEMBERS STANDARD 7. Press the CH▼/CH▲ key to select a BACK SAVE SELECT 1: 2: 3: member from the Individual directory, then INDIVIDUAL DIR. 4: 5: press the [SELECT] soft key. YAESU 6: KAREN 7: BOB BACK DELETE SELECT 8. Repeat steps 11 and 11 to add members to 366901254 Horizon-1 GM GROUP DIR. the group. Standard Horizon-2 STANDARD USCG 1: 9. Press the [BACK] soft key to return to the BACK DELETE SELECT 2: 3:KAREN “NAME” and “GM ID” screen. GM GROUP DIR. 4: 5: NAME: 10. To store the data, select “SAVE”” with the STANDARD--------- 6: 7: CH▼/CH▲ key, then press the [ENTER] GM ID: 087654321 BACK DELETE SELECT soft key. MEMBER SAVE BACK SELECT 11. To enter other group directories, repeat steps 5 through 10. 12. Press the CLR key to return to radio operation. 13.1.2 Setting Up the Polling Time Interval Press and hold GM SETUP SELECT INTERVAL SELECT     key ( / key) ( key) ( / key) ( key) 1. Press the CH▼/CH▲ key to select the desired interval GM SETUP INTERVAL time, then press the [ENTER] soft key. 1min 3min 2. Press the CLR key to return to radio operation. 5min 10min 15min BACK ENTER 13.1.3 Enabling/Disabling Transmission during GM Operation Press and hold GM SETUP SELECT GM TX SELECT     key ( / key) ( key) ( / key) ( key) 1. Press the CH▼/CH▲ key to select the desired transmis- GM SETUP GM TX sion type, then press the [ENTER] soft key. OFF ON GM OFF: Disables the transmission during GM operation. ON ALL ON GM: Enables the transmission during the GM target display. BACK ENTER ON ALL: Enables the transmission during the GM opera- tion. 2. Press the CLR key to return to radio operation. 79

13.2 STARTING GM OPERATION Press SELECT   key ( / / / key) ( key) 1. Select a group you want to monitor with the GROUP MONITOR MEMORY CH▼/CH▲ key, then press the [SELECT] KAREN BOB soft key. 366901254 Horizon-1 BUSY USA HI Standard The GM operation starts and the GM target Horizon-2 USCG GM 4 25 DW-16 display appears. BACK SELECT 3 1 BRG T 2 300° 2. Press the CLR key to return to radio opera- 6 5 DSTkm 35.2 SOGkph tion. N-UP 20nm 36.0 GM 1 KAREN 13.2.1 Transmitting a DSC Call to a Group Member 1. Press ◄/► key while the GM target is BUSY USA HI displayed, then press the [LIST] soft key. GM 4 1 25 DW-16 3 BRG T 2. Press the CH▼/CH▲ key to select a 2 300° 6 5 DSTkm 35.2 GM KARENS member you want to call. SOGkph NAME 1:KAREN DST NM 35.2 N-UP 20nm 36.0 3. Press the [SELECT] soft key. LIST CALL FUNC 2:BOB 11.0 3:366901254 12.8 4:Horizon 34.9 The list number of the selected member will BUSY USA HI 5:Standard 30.0 be highlighted, and the name of the selected GM 4 1 25 DW-16 6:Horizon-2 47.6 7:MIKE 38.4 BRG T BACK INFO SELECT 3 member will be displayed at the bottom of 5 2 300° DSTkm BUSY USA HI 25 6 35.2 the screen. N-UP SOGkph 20nm 36.0 GM 4 DW-16 4. Press ◄/► key, then press the [CALL] soft GM 2 BOB 3 1 2 BRG T 300° 5 DSTkm key to transmit a DSC Individual call to the 6 35.2 SOGkph N-UP 20nm 36.0 selected member. LIST CALL FUNC 13.2.2 Starting Navigation to a Group Member 1. Press ◄/► key while the GM target is BUSY USA HI displayed, then press the [LIST] soft key. GM 4 1 25 DW-16 3 BRG T 2. Press the CH▼/CH▲ key to select a 2 300° 6 5 DSTkm 35.2 GM KARENS member you want to approach. SOGkph NAME 1:KAREN DST NM 35.2 N-UP 20nm 36.0 3. Press the [INFO] soft key to display the loca- LIST CALL FUNC 2:BOB 11.0 3:366901254 12.8 4:Horizon 34.9 tion, distance, and bearing of the selected GM KARENS 5:Standard 30.0 GM INFO 6:Horizon-2 47.6 member. 987654321 Horizon 7:MIKE BACK 38.4 INFO SELECT POS: 24°25.9755 N 4. Press the [TO WPT] soft key to start navi- 118°59.4566 W TIME: 12:56 AM LOC gation to the selected member. (Press the DST: 10 NH BRG: 006° T [BACK] soft key twice to cancel and return BACK CALL TO WPT to the GM target display.) 80


Document Created: 2018-05-11 11:22:09
Document Modified: 2018-05-11 11:22:09
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC