Operating Manual 69_74

FCC ID: K6630633X30

Users Manual

Download: PDF
FCCID_3849295

11.11.4 Deleting Logged Calls from the DSC Log Directory Press SELECT DSC LOG SELECT     key ( / / / key) ( key) ( / key) ( key) 1. Press the CH▼/CH▲ key to select “LOG DSC LOG TRANSMITTED DELETE” menu. RX DISTRESS RX OTHER CALL 2. Press the [SELECT] soft key, then press LOG DELETE LOG DELETE the CH▼/CH▲ key to select the category TRANSMITTED RX DISTRESS (“TRANSMITTED”, “RX DISTRESS”, “RX OTHER BACK SELECT RX OTHER CALL ALL LOG CALL” or “ALL LOG”) to be deleted. LOG DELETE RX OTHER CALL 3. Press the [SELECT] soft key. BACK SELECT The display will show “Do you want to DELETE delete the LOG?”. Do you want to delete the LOG? 4. Press the [YES] soft key. (To cancel, press YES NO the [NO] soft key.) 5. Press the CLR key to return to radio operation. NOTE The procedure above will delete all logged calls of the selected category at one time. To delete logged calls one by one, review the details of the call you want to delete, then press the [DELETE] soft key. 11.12 DSC LOOP BACK OPERATION The HX890 has a self-test feature for DSC call. Press SELECT DSC LOOP BACK SELECT     key ( / / / key) ( key) ( / key) ( key) 1. Press the [YES] soft key to start a test. (To DSC LOOP BACK cancel, press the [NO] soft key.) The display will show “Passed!” if the DSC TEST DSC LOOP BACK feature properly operates, then return to the Do you want to start a test? “DSC CALL” menu. YES NO TEST 2. Press the CLR key to return to radio opera- DSC LOOP BACK Testing... tion. YES NO TEST Passed! YES NO 69

12. NAVIGATION The HX890 is capable of storing up to 250 waypoints for navigation using the compass page. You can also navigate to the DSC Distress Alert GPS position, or to a GPS position received from another DSC radio using DSC polling. 12.1 WAYPOINT OPERATION 12.1.1 Starting and Stopping Navigation Navigation by Using the Waypoint Directory Press SELECT WAYPOINT SELECT     key ( / / / key) ( key) ( / key) ( key) 1. Select the desired category (“HISTORY” or WAYPOINT HISTORY “MEMORY”) with the CH▼/CH▲ key, then MEMORY MANUAL press the [SELECT] soft key. WAYPOINT 2. Press the CH▼/CH▲ key to select a KAREN HISTORY waypoint, then press the [SELECT] soft key. BACK SELECT BOB 366901254 Horizon-1 The navigation screen will appear. BUSY USA HI Standard The screen includes the distance and direc- WPT 25 DW-16 Horizon-2 USCG BRG T BACK SELECT tion to the destination, and the waypoint 300° DSTkm 35.2 is indicated by a dot () displayed on the N-UP SOGkph 20nm 36.0 compass. WPT KAREN 3. Press ◄/► key, then press the [STOP] soft key to stop the navigation. Navigation by Manually Entering a Waypoint Press SELECT WAYPOINT SELECT     key ( / / / key) ( key) ( / key) ( key) 1. Select “MANUAL” with the CH▼/CH▲ key, then press the WAYPOINT [SELECT] soft key. HISTORY MEMORY MANUAL BACK SELECT 70

2. If you want to give the waypoint an easy- WAYPOINT NAME: to-find name, select “NAME” with the CH▼/ 001WPT---------- POSITION: CH▲ key, press the [SELECT] soft key, then --° --.---- - ---° --.---- - WAYPOINT enter the name. For details, refer to “11.5.1 POSITION SAVE SAVE & GOTO Lat --˚--.----- Setting up the Individual Call Directory”. BACK SELECT Lon ---˚--.----- 3. Select “POSITION” with the CH▼/CH▲ key, WAYPOINT 12 34 567890 SN NAME: then press the [SELECT] soft key. Delete 001WPT---------- POSITION: BACK FINISH SELECT 4. Press the CH▼/CH▲/◄/► key to select 24° 25.9755 N 118° 59.4566 W BUSY USA HI the first number of latitude, then press WPT 25 DW-16 GOTO SAVE & GOTO the [SELECT] soft key to step to the next BRG T BACK SELECT 300° number. DSTkm 35.2 SOGkph 5. Repeat step 4 to set the position. N-UP 20nm 36.0 WPT 001WPT 6. If a mistake was entered, press the CH▼/CH▲/◄/► key to select “←” or “→”, press the [SELECT] soft key until the wrong character is selected, then perform step 4. 7. When finished programming the position, press the [FINISH] soft key. The display will return to the previous screen. 8. Select “SAVE & GO” with the CH▼/CH▲ key, then press the [SELECT] soft key. The navigation screen will appear. The screen includes the distance and direction to the destination, and the waypoint is indicated by a dot () inside the compass. 9. Press ◄/► key, then press the [STOP] soft key to stop the navigation. 12.1.2 Setting Up Waypoint Directory Marking a Position The current position of the vessel may be marked and stored in the Waypoint Directory. Press and hold WAYPOINT SETUP SELECT MARK POSITION SELECT     key ( / key) ( key) ( / key) ( key) 1. Select “NAME” with the CH▼/CH▲ key, then MARK POSITION NAME: press the [SELECT] soft key. 001MARK---------- POSITION: 2. Enter the waypoint name by pressing the 24° 25.9755 S 118° 59.4566 W MARK POSITION CH▼/CH▲ key and the [SELECT] soft key. SAVE NAME: 001MARK---------- When the name entry is complete, press the BACK SELECT POSITION: 24° 25.9755 S [FINISH] soft key. 118° 59.4566 W SAVE 3. If you want to edit the position, select “POSITION” with the CH▼/CH▲ key, press BACK SELECT the [SELECT] soft key, then enter the new coordinates. 71

When finished editing the position, press the [FINISH] soft key. 4. Select “SAVE” with the CH▼/CH▲ key, then press the [SELECT] soft key to save the mark position into memory. 5. Press the CLR key to return to radio operation. Adding a Waypoint Press and hold WAYPOINT SETUP SELECT WAYPOINT DIR. SELECT     key ( / key) ( key) ( / key) ( key) 1. Select “ADD” with the CH▼/CH▲ key, then WAYPOINT SETUP WAYPOINT DIR. press the [SELECT] soft key. ADD EDIT 2. Select “NAME” with the CH▼/CH▲ key, then DELETE WAYPOINT DIR. press the [SELECT] soft key. NAME: 001WPT---------- 3. Enter the waypoint name by pressing the POSITION: BACK SELECT --°--.---- CH▼/CH▲ key and the [SELECT] soft key. - ---°--.---- WAYPOINT DIR. - SAVE NAME: When finished entering the name, press the STANDARD--------- BACK SELECT POSITION: [FINISH] soft key. 34° 118° 25.9755 59.4566 S W 4. Select “POSITION” with the CH▼/CH▲ key, SAVE press the [SELECT] soft key, then enter the BACK ENTER coordinates. When finished entering the position, press the [FINISH] soft key. 5. Select “SAVE” with the CH▼/CH▲ key, then press the [SELECT] soft key to save the waypoint into memory. 6. Press the CLR key to return to radio operation. Editing a Waypoint This function allows a previously entered waypoint to be edited. Press and hold WAYPOINT SETUP SELECT WAYPOINT DIR. SELECT     key ( / key) ( key) ( / key) ( key) 1. Select “EDIT” with the CH▼/CH▲ key, then press the WAYPOINT SETUP [SELECT] soft key. WAYPOINT DIR. ADD EDIT DELETE BACK SELECT 72

2. Press the CH▼/CH▲ key to select the WAYPOINT DIR. EDIT waypoint to be edited, then press the 366901254 BOB [SELECT] soft key to show the waypoint Horizon-1 Horizon-2 KAREN WAYPOINT DIR. input screen. Standard NAME: STANDARD--------- USCG 3. Select “NAME” or “POSITION” with the CH▼/ BACK SELECT 34°25.9755 POSITION: S CH▲ key, then press the [SELECT] soft key. 118°59.4566 SAVE W 4. Press the CH▼/CH▲/◄/► key to select BACK ENTER “←” or “→”, press the [SELECT] soft key until the character to be changed is selected, then enter a new character. 5. Repeat step 4 until the waypoint is updated. When finished editing, press the [FINISH] soft key. 6. Select “SAVE” with the CH▼/CH▲ key, then press the [SELECT] soft key to store the edited waypoint into memory. 7. Press the CLR key to return to radio operation. Deleting a Waypoint Press and hold WAYPOINT SETUP SELECT WAYPOINT DIR. SELECT     key ( / key) ( key) ( / key) ( key) 1. Select “DELETE” with the CH▼/CH▲ key, WAYPOINT SETUP WAYPOINT DIR. then press the [SELECT] soft key. ADD EDIT 2. Press the CH▼/CH▲ key to select the DELETE waypoint to be deleted, then press the WAYPOINT DIR. DELETE BACK SELECT 366901254 [SELECT] soft key. BOB Horizon-1 3. Confirm the waypoint to be deleted, select NAME: DELETE Horizon-2 KAREN Standard “OK” with the CH▼/CH▲ key, then press the KAREN------------ POSITION: USCG BACK SELECT 34° 25.9755 S [ENTER] soft key. 118° 59.4566 W CANCEL OK BACK ENTER 4. Press the CLR key to return to radio operation. Saving a DSC Position Call as a Waypoint When a position is received from another DSC radio the HX890 allows the position to be saved as a waypoint. Refer to section “11.8.4 Saving the Reported Position as a Waypoint” for details. 73

12.1.3 Selecting the Display Range Use this menu item to set the range on the compass display. Press and hold WAYPOINT SETUP SELECT DISPLAY RANGE SELECT     key ( / key) ( key) ( / key) ( key) 1. Press the CH▼/CH▲ key to select the desired range. (Unit WAYPOINT SETUP DISPLAY RANGE of measure depends on the settings in the GPS SETUP AUTO 2nm menu.) 5nm 10nm 2. Press the [ENTER] soft key to store the selected setting. 25nm BACK ENTER 3. Press the CLR key to return to radio operation. 12.1.4 Selecting the Arrival Range This menu item sets the range within which the HX890 will signal arrival at the destination. Press and hold WAYPOINT SETUP SELECT ARRIVAL RANGE SELECT     key ( / key) ( key) ( / key) ( key) 1. Press the CH▼/CH▲ key to select the desired range. (Unit WAYPOINT SETUP of measure depends on the settings in the GPS SETUP ARRIVAL RANGE 0.05nm menu.) 0.1nm 0.2nm 2. Press the [ENTER] soft key to store the selected setting. 0.5nm 1nm BACK ENTER 3. Press the CLR key to return to radio operation. 12.2 ROUTING OPERATION The HX890 allows setting 1 to 15 waypoints to create a route. Via14 Via15 Via3 Via2 WPT Current Via1 position Routing to a Waypoint 74


Document Created: 2018-05-11 11:19:26
Document Modified: 2018-05-11 11:19:26
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC