Operating Manual 62_68

FCC ID: K6630633X30

Users Manual

Download: PDF
FCCID_3849294

11.8.3 Navigating to the Reported Position The HX890 has a feature that aids navigation to a received position report call by using the compass display. Navigating to the report call may be enabled by the procedure below. 1. After the position report call has been received, press the [INFO] soft key. 2. Press the [TO WPT] soft key. RX POS REPORT POS INFO 3. To start navigation using the compass 987654321 Horizon 24°25.9755 display, select “GOTO” with the CH▼/CH▲ POS: N 118°59.4566 W 12:56 TIME: WAYPOINT AM LOC key, then press the [ENTER] soft key. 10 006° DST: BRG: NH NAME: T 001WPT---------- The display indicates the distance and BACK TO WPT QUIT 24°25.9755 POSITION: N 118°59.4566 W direction of the received vessel, and also BUSY USA HI the compass indicates the received vessel WPT 25 DW-16 GOTO SAVE & GOTO BRG BACK ENTER T with a dot (). 300° DST km 35.2 SOGkph N-UP 20nm 36.0 WPT Horizon Stopping Navigation to the Reported Position 1. Press one of the soft keys to show the key selections. BUSY USA HI 2. Press the [STOP] soft key. The radio will stop navigating WPT DW-16 25 BRG T to the waypoint and the normal VHF display will be shown. 300° DSTkm 35.2 SOGkph N-UP 20nm 36.0 STOP NEXT TG FUNC 11.8.4 Saving the Reported Position as a Waypoint The HX890 can save a position report call in the radio’s memory as a waypoint. 1. After the position report call has been RX POS REPORT 987654321 received, press the [SAVE] soft key. CATEG: Horizon SAFETY POS: 24°25.9755 N 2. If you want to change the name of the 118°59.4566 W TIME: 12:56 AM LOC WAYPOINT DIR. waypoint, press the CH▼/CH▲ key to select NAME: 001WPT---------- SINCE: 00:05 “NAME”, then press the [SELECT] soft key. SAVE INFO QUIT POSITION: 24° 25.9755 N 118° 59.4566 W 3. Enter the name of the waypoint you want to WAYPOINT DIR. SAVE NAME reference in the directory. For details, refer S --------------- BACK SELECT to “11.5.1 Setting up the Individual Call A B C D EF G HI J K LM WAYPOINT DIR. N O P Q RS T UV W X YZ Directory”. 0 1 2 3 45 6 78 9 NAME: Horizon---------- a& Delete [ 4. Press the CH▼/CH▲ key to select “SAVE”, BACK FINISH SELECT POSITION: 24° 25.9755 N 118° 59.4566 W then press the [ENTER] soft key to save the RX POS REPORT SAVE 987654321 waypoint into memory. Horizon CATEG: SAFETY BACK ENTER POS: 24°25.9755 N 5. Press the [OK] soft key to return to the posi- 118°59.4556 W TIME: 12:56 AM LOC tion report display. Saved OK 62

Navigating to a Saved Waypoint Refer to section “12. NAVIGATION” for details. 11.8.5 Setting up a Position Report Ringer The HX890 position report ringer may be turned OFF: Press and hold DSC SETUP SELECT DSC BEEP SELECT     key ( / key) ( key) ( / key) ( key) 1. Press the [SELECT] soft key, then select DSC SETUP DSC BEEP “POS REPORT” with the CH▼/CH▲ key. INDIVIDUAL ON 2. Press the [SELECT] soft key, then select GROUP ALL SHIPS ON ON DSC BEEP POS REPORT “OFF” with the CH▼/CH▲ key. POS REQUEST ON OFF POS REPORT ON 3. Press the [SELECT] soft key to store the BACK SELECT ON selected setting. 4. Press the CLR key to return to radio operation. BACK ENTER To re-enable the ringer tone, repeat the above procedure, pressing the CH▼/ CH▲ key to select “ON” in the step 6 above. 11.9 AUTO POS POLLING The HX890 has the capability to automatically track seven vessels programmed into the individual directory, or to automatically send your position information to the programmed stations. 11.9.1 Setting up the Polling Operation Press and hold DSC SETUP SELECT AUTO POS POLLING SELECT     key ( / key) ( key) ( / key) ( key) 1. Press the CH▼/CH▲ key to select the desired operation DSC SETUP AUTO POS POLLING (AUTO POS REQUEST and AUTO POS REPORT), and AUTO POS REQUEST AUTO POS REPORT press the [ENTER] soft key. 2. Press the CLR key to return to radio operation. BACK ENTER 11.9.2 Setting up the Polling Time Interval Press and hold DSC SETUP SELECT AUTO POS TIME SELECT     key ( / key) ( key) ( / key) ( key) 63

1. Press the CH▼/CH▲ key to select the desired interval DSC SETUP AUTO POS TIME time (30 second, 1, 2, 3, or 5 minutes) and press the 30sec 1min [ENTER] soft key. 2min 2. Press the CLR key to return to radio operation. 3min 5min BACK ENTER 11.9.3 Selecting Vessels to be Automatically Polled NOTE The radio uses the individual directory to select vessels to be auto- matically polled. Before proceeding, refer to section “11.5.1 Setting up the Individual Call Directory” and enter the MMSI of vessels you want to poll before proceeding. Press SELECT AUTO POS POLLING SELECT     key ( / / / key) ( key) ( / key) ( key) 1. Press the CH▼/CH▲ key to select “SELECTED ID”, then press AUTO POS POLLING the [SELECT] soft key. ACTIVATION SELECTED ID BACK SELECT 2. The radio will show a blank row highlighted AUTO POS POLLING SELECTED ID when you select the vessel for the first time. 1:000000000 2: Press the [SELECT] soft key. 3: AUTO POS POLLING 4: 3. The radio will show the vessels programmed INDIVIDUAL DIR. 5: KAREN 6: in the individual directory. Press the CH▼/ BOB BACK DELETE SELECT 366901254 CH▲ key to select the desired vessel and Horizon-1 Standard AUTO POS POLLING Horizon-2 SELECTED ID press the [ENTER] soft key. USCG KAREN BACK ENTER 4. For more entries, press the CH▼/CH▲ key to select a blank row, press the [SELECT] soft key, then perform step 3. BACK DELETE SELECT 5. When finished, press the CLR key to exit to the radio mode. 11.9.4 Enabling/Disabling Auto POS Polling Press SELECT AUTO POS POLLING SELECT     key ( / / / key) ( key) ( / key) ( key) 64

1. Press the CH▼/CH▲ key to select “ACTI- AUTO POS POLLING ACTIVATION STOP VATION”, then press the [SELECT] soft key. SELECTED ID 2. Select “START” to enable transmissions or AUTO POS POLLING “STOP” to disable transmissions. ACTIVATION START 3. Press the [ENTER] soft key. BACK SELECT STOP 4. Press the CLR key to return to radio opera- tion. BACK ENTER 5. Auto POS Polling starts and the “A” icon will BUSY USA HI 22 light up on the screen. MEM P-SET P A USCG A A LAT 33°37.1200 s LON 118°09.5822 W TIME LOC 09:56:56 AM 11.10 DSC TEST This function is used to contact another DSC equipped vessel and ensure the DSC functions of the radio are operating. NOTE To use this feature, the radio that will receive the test call must also have the DSC Test feature. To perform the DSC test, first enter the MMSI of another vessel into the individual directory, or manually enter the MMSI using the procedure below: 11.10.1 Programming MMSI into Individual Directory Refer to section “11.5.1 Setting up the Individual Call Directory”. 11.10.2 Transmitting a DSC Test to Another Vessel DSC Test call by using Individual/Position Directory Press SELECT DSC TEST SELECT     key ( / / / key) ( key) ( / key) ( key) 65

1. Press the CH▼/CH▲ key to select “HISTO- DSC TEST CALL HISTORY RY” or “MEMORY”, then press the [SELECT] MEMORY NEW ID soft key. DSC TEST CALL 2. Press the CH▼/CH▲ key to select the ship KAREN HISTORY name and press the [SELECT] soft key. BACK SELECT BOB 366901254 Horizon-1 3. Press the [YES] soft key to transmit the DSC DSC TEST CALL Standard 987654321 Horizon-2 Horizon-1 test call to the other vessel. CATEG: SAFETY USCG BACK SELECT 4. Press the [QUIT] soft key to return to radio DSC TEST CALL operation. Do you want to transmit a Call? 987654321 Horizon-1 CATEG: SAFETY YES NO SINCE: 00:05 Waiting for ACK RESEND QUIT DSC Test Call by Manually Entering an MMSI Press SELECT DSC TEST SELECT     key ( / / / key) ( key) ( / key) ( key) 1. Press the CH▼/CH▲ key to select “NEW ID” RX TEST CALL HISTORY and press the [SELECT] soft key. MEMORY NEW ID 2. Press the CH▼/CH▲ key to select the first DSC TEST CALL digit in the MMSI and press the [SELECT] MMSI soft key. BACK SELECT 98765432 - 3. Repeat step 4 until all the numbers of the DSC TEST CALL 987654321 12 34 567890 MMSI are shown on the display. CATEG: SAFETY BACK Delete FINISH SELECT 4. Press the [FINISH] soft key to show the test DSC TEST CALL 987654321 call page. Do you want to transmit a Call? CATEG: SAFETY 5. Press the [YES] soft key to transmit the DSC YES NO SINCE: 00:05 test call to the other vessel. Waiting for ACK 6. Press the [QUIT] soft key to return to radio RESEND QUIT operation. NOTE After the radio receives a test call reply from the called vessel, the radio will ring and show “RX TEST CALL” on the display, which confirms the called radio has received the test message. 66

11.10.3 Receiving a DSC Test Call When another vessel transmits a DSC Test call to the HX890 the following will happen: 1. When a DSC Test call is received, the radio will automati- RX DSC TEST 366901235 cally respond to the calling vessel. CATEG: Yaesu SAFETY 2. To exit from the DSC Test call display, press the [QUIT] 00:05 SINCE: DSC TEST REPLY soft key. Transmitted QUIT 11.11 DSC LOG OPERATION The HX890 logs: transmitted calls; received DSC Distress Alerts; and other calls (individual, group, all ships, etc.), and the “ ” icon will appear on the HX890 display. The DSC log feature is similar to an answer machine where calls are recorded for review. The HX890 can store up to 24 transmitted calls, up to the latest 27 Distress Alerts, and up to the latest 64 other calls (individual, group, all ships, position report, position request ack, test call ack, and polling calls). NOTE When the “DSC LOG” menu is selected, the HX890 will display high- priority logged call automatically. 11.11.1 Reviewing and Resending a Transmitted Logged Call The HX890 allows transmitted logged calls to be reviewed and to resend the call. Press SELECT DSC LOG SELECT     key ( / / / key) ( key) ( / key) ( key) 1. Press the [SELECT] soft key, then confirm DSC LOG TRANSMITTED “TRANSMITTED” is selected. RX DISTRESS RX OTHER CALL 2. Press the [SELECT] soft key, then press the LOG DELETE DSC LOG CH▼/CH▲ key to select the station (name TRANSMITTED 12:16 125932502 or MMSI number) you want to review and/ BACK SELECT 12:30 366901254 13:02 325401690 or resend the call. TRANSMITTED LOG 13:06 336605425 POS REPORT 125932502 3. Press the [SELECT] soft key to review YAESU-1 BACK SELECT CATEG: SAFETY details for the selected station. TX TM: 10 ° POS: 24° 55 UTC 25.9755 S 4. Press the [CALL] soft key to resend the call 118°59.4566 W TIME: 12 °56 UTC or press the [BACK] soft key to go back to BACK CALL DELETE the DSC transmitted call list. 67

11.11.2 Reviewing a Logged Distress Alert The HX890 logged Distress Alert Calls may be reviewed. Press SELECT DSC LOG SELECT     key ( / / / key) ( key) ( / key) ( key) 1. Press the CH▼/CH▲ key to select “RX DSC LOG TRANSMITTED DISTRESS”. RX DISTRESS RX OTHER CALL 2. Press the [SELECT] soft key, then press the LOG DELETE DSC LOG CH▼/CH▲ key to select the station names RX DISTRESS 12:16 125932502 or MMSI numbers in the DSC LOG that you BACK SELECT 12:30 366901254 13:02 325401690 want to review and/or relay the Distress Alert RX DISTRESS LOG 13:06 336605425 OWN DISTRESS 125932502 to the other vessels. YAESU-1 BACK SELECT 10:25TX TM: AM LOC Note: When there is an unread received call, the 25/JanDATE: DIST VESSEL 125932502 “ ” icon will appear at the left of the call YAESU-1 entry. BACK DELETE INFO 3. Press the [SELECT] soft key to review the details of the selected station. 4. Press the [INFO] soft key to display more information or press the [BACK] soft key to return to the received Distress Alert list. 11.11.3 Reviewing Other Logged Calls Press SELECT DSC LOG SELECT     key ( / / / key) ( key) ( / key) ( key) 1. Press the CH▼/CH▲ key to select “RX DSC LOG TRANSMITTED OTHER CALL”. RX DISTRESS RX OTHER CALL 2. Press the [SELECT] soft key, then press the LOG DELETE DSC LOG CH▼/CH▲ key to select the station (name RX OTHER CALL 12:16 125932502 or MMSI number) you want to review and/ BACK SELECT 12:30 366901254 13:02 325401690 or call back. RX OTHER CALL LOG 13:06 336605425 INDIVIDUAL 125932502 Note: When there is an unread received YAESU-1 BACK SELECT ROUTINE CATEG: call, the “ ” icon will appear at the left of 26 10:55 CH: RX TM: UTC 25/Jan RX DT: the call entry. 3. Press the [SELECT] soft key to review BACK DELETE REPLY details for the selected station. 4. Press the [CALL] soft key to reply to the call or press the [BACK] soft key to return to the received call list. 68


Document Created: 2018-05-11 11:11:14
Document Modified: 2018-05-11 11:11:14
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC