User Manual 20

FCC ID: K6620345X40

Users Manual

Download: PDF
FCCID_2766355

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Set-up Menu 5 Touch [OUTPUT] to select the output function of the &#6# COM port Ჹ %1/21465'66+0) The setting changes as follows each time it is 52''& ᳁ᲾᲸᲸDRU 176276 1(( ECOGTC touched. 92(14/#6 0/'# “OFF(camera)” → “GPS OUT” → “PACKET” → 92(+.6'4 #.. “WAYPOINT” $#%- OFF (camera): The output function of the COM port is not used (invalid operation). GPS OUT: O  utputs the GPS data obtained by the radio. PACKET: Outputs the AX.25 packet communication data received using the in-built modem function. WAYPOINT: O  utputs the position information of other station beacons obtained from the APRS packets received as WAYPOINT data. Tip Factory default value: OFF (camera) 6 Touch [WP FORMAT] to select the data format &#6# Customize Menu Settings and User Preferences This sets the number of digits in the call sign Ჹ %1/21465'66+0) information of the APRS beacon station appended 52''& ᳁ᲾᲸᲸDRU 176276 9#;21+06 to each data when “WAYPOINT” is selected in Step 92(14/#6 0/'# 5 (the data will be output using the NMEA-0183 92(+.6'4 #.. $GPWPL format). $#%- The setting changes as follows each time it is touched. “NMEA 9” → “NMEA 8” → “NMEA 7” → “NMEA 6” NMEA 9: The call sign will be limited to 9 digits on the right (Example: The call sign information for JQ1YBG-14 is “JQ1YBG-14”). NMEA 8: The call sign will be limited to 8 digits on the right (Example: The call sign information for JQ1YBG-14 is “Q1YBG-14”). NMEA 7: The call sign will be limited to 7 digits on the right (Example: The call sign information for JQ1YBG-14 is “1YBG-14”). NMEA 6: The call sign will be limited to 6 digits on the right (Example: The call sign information for JQ1YBG-14 is “YBG-14”). Tip Factory default value: NMEA 9 194

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Set-up Menu 7 Touch [WP FILTER] to select the forwarding content &#6# This sets the type of beacon that you would like to Ჹ %1/21465'66+0) output when “WAYPOINT” is selected in Step 5. 52''& ᳁ᲾᲸᲸDRU 176276 9#;21+06 The setting changes as follows each time it is 92(14/#6 0/'# touched. 92(+.6'4 #.. “ALL” → “MOBILE” → “FREQUENCY” → “OBJECT/ $#%- ITEM” → “DIGIPEATER” → “VoIP”→ “WEATHER” → “YAESU” → “CALL RINGER” → “RNG RINGER” ALL: O  utputs all beacons received. MOBILE: O  utputs only mobile stations. FREQUENCY: Outputs only the stations with frequency information. OBJECT/ITEM: O  utputs only the object station or item station. DIGIPEATER: O  utputs only the digital repeater station. VoIP: O  utputs only VoIP stations such as WIRES. WEATHER: O  utputs only the weather station. YAESU: Outputs only stations which are using Yaesu Customize Menu Settings and User Preferences transceivers. CALL RINGER: Outputs only the information of the call sign ringer station set using [10 APRS RINGER (CALL)] in the APRS set-up menu. RNG RINGER: Outputs only the information of the station deemed to be the approaching station using the [9 APRS RINGER] range ringer function in the APRS set-up menu. Tip Factory default value: ALL 8 Press for one second or longer The COM port will be set and the display will return to the previous screen. 195

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Set-up Menu Setting the operating band of the APRS and data communication The operating band of the APRS (internal modem) and data communication (when using the [DATA] jack at the back of the main body) can be set. 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [DATA] 5'672/'07 &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 3 Touch [2 DATA BAND SELECT] &#6# The screen for the detailed settings will be displayed. Ჹ %1/21465'66+0) Ż Ჺ &#6#$#0&5'.'%6 Ż ᲻ &#6#52''& Ż  &#6#537'.%* Ż $#%- 4 Touch [APRS] to select the APRS operating band &#6# Customize Menu Settings and User Preferences The setting changes as follows each time it is  &#6#$#0&5'.'%6 touched. #245 $$#0&(+: “A-BAND FIX” → “B-BAND FIX” → “A=TX/B=RX” → &#6# $$#0&(+: “A=RX/B=TX” → “MAIN BAND” → “SUB BAND” A-BAND FIX: The upper band will be selected. $#%- B-BAND FIX: The lower band will be selected. A=TX/B=RX: Transmits using the upper band and receives using the lower band. A=RX/B=TX: R  eceives using the upper band and transmits using the lower band. MAIN BAND: The main band will be selected. SUB BAND: The sub-band will be selected. Tip Factory default value: B-BAND FIX 5 Touch [DATA] to select the data transmission &#6# operating band  &#6#$#0&5'.'%6 Repeat Step 4 to set the data communication #245 $$#0&(+: operating band. &#6# $$#0&(+: Tip Factory default value: B-BAND FIX $#%- 6 Press for one second or longer The operating band of the APRS and data communication will be set and the display will return to the previous screen. 196

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Set-up Menu Setting the baud rate of the APRS and data communication The baud rate of the APRS (internal modem) and data communication (when using the [DATA] jack at the back of the main body) can be set. 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [DATA] 5'672/'07 &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 3 Touch [3 DATA SPEED] &#6# The screen for the detailed settings will be displayed. Ჹ %1/21465'66+0) Ż Ჺ &#6#$#0&5'.'%6 Ż ᲻ &#6#52''& Ż  &#6#537'.%* Ż $#%- 4 Touch [APRS] to select the packet communication &#6# Customize Menu Settings and User Preferences speed  &#6#52''& The setting will switch between “1200 bps” and “9600 #245 DRU bps” each time it is touched. &#6# DRU 1200 bps: Sets the speed as AFSK 1200 bps packet. 9600 bps: Sets the speed as GMSK 9600 bps $#%- packet. Tip Factory default value: 1200 bps 5 Touch [DATA] to select the data communication &#6# speed  &#6#52''& Repeat Step 4 to set the data communication speed. #245 DRU Tip Factory default value: 1200 bps &#6# DRU $#%- 6 Press for one second or longer The baud rate of the APRS and data communication will be set and the display will return to the previous screen. 197

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Set-up Menu Setting the output condition of the squelch detection and squelch terminal The squelch detection condition during APRS (internal modem) operation and squelch terminal output condition of the data communication (when using the [DATA] jack at the back of the main body) can be set. 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [DATA] 5'672/'07 &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 3 Touch [4 DATA SQUELCH] &#6# The screen for the detailed settings will be displayed. Ჹ %1/21465'66+0) Ż Ჺ &#6#$#0&5'.'%6 Ż ᲻ &#6#52''& Ż  &#6#537'.%* Ż $#%- 4 Touch [APRS] to select the squelch detection Customize Menu Settings and User Preferences &#6# condition during APRS operation using the internal  &#6#537'.%* modem #245 4:$#0& The setting switches between “RX BAND” and “TX/ &#6# 4:$#0& RX BAND” each time it is touched. 6: 10 RX BAND: Transmission is not possible when the $#%- receive band squelch is open. TX/RX BAND: Transmission is not possible when either the receive band or transmit band squelch is open. Tip Factory default value: RX BAND 5 Touch [DATA] to select the output condition (during &#6# reception) related to the squelch terminal inside the  &#6#537'.%* [DATA] jack #245 4:$#0& The setting switches between “RX BAND” and “TX/ &#6# 4:$#0& RX BAND” each time it is touched. 6: 10 RX BAND: The SQL terminal becomes active when $#%- the receive band squelch is open. TX/RX BAND: The SQL terminal becomes active when either the receive band or transmit band squelch is open. Tip Factory default value: RX BAND 198

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Set-up Menu 6 Touch [TX] to select the output condition (during &#6# transmission) related to the squelch terminal inside  &#6#537'.%* the [DATA] jack #245 4:$#0& Each time this is touched, the setting will switch &#6# 4:$#0& between “ON” and “OFF”. 6: 10 ON: The SQL terminal becomes active during $#%- transmission. OFF: The SQL terminal does not become active during transmission. ••The action to be taken when the reception band specified using [DATA] under [2 DATA BAND SELECT] in the DATA set-up menu is ready to transmit is set here. ••When this is set to ON, transmission of external devices such as TNC can be suppressed during transmission. Tip Factory default value: ON 7 Press for one second or longer The APRS and data communication squelch will be set and the display will return to Customize Menu Settings and User Preferences the previous screen. APRS function settings The APRS function of the radio is a data communication system for data such as messages and station position using the APRS format. Refer to the separate Operating Manual APRS Edition for details (download the manual from the YAESU website). Micro-SD card settings Writing settings to the micro-SD card Using a micro-SD card, the memory channels registered in the radio and the settings in the set-up menu can be copied to another FTM-400XDR/DE. The settings saved in the micro-SD card can also be downloaded into the radio. Refer to “Copying the Radio Data to another transceiver” ( P.151) for details. 199

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Set-up Menu Writing group IDs to the micro-SD card The group ID information registered in the radio can be written to a micro-SD card. The group ID information saved in the micro-SD card can also be downloaded into the radio. Refer to the separate Operating Manual GM Edition for further details (download the operating manual from the YAESU website). Initializing the micro-SD card Initialize the memory card when using a new micro-SD card. Refer to “Initializing the micro-SD card” ( P.35) for details. Optional device settings Setting the image of the connected speaker microphone with camera The image size and quality when taking pictures with the connected speaker microphone with a camera (MH-85A11U) can be set. 1 Press for one second or longer The set-up menu will be displayed. Customize Menu Settings and User Preferences 2 Touch [OPTION] 5'672/'07 &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 3 Touch [1 USB CAMERA] 126+1 0 The screen for setting the image will be displayed. Ჹ 75$%#/'4# Ż ••PICTURE SIZE: Sets the size of the picture to be Ჺ $ Ჴ WGVQQVJ Ż taken. ᲻ 81+%'/'/14; Ż ••PICTURE QUALITY: Sets the quality of the picture to be taken. $#%- 4 Touch [PICTURE SIZE] to set the picture size 126+1 0 The setting changes between “160✽120” and Ჹ 75$%#/'4# “320✽240” each time it is touched. 2+%674'5+<'  ᲸᶤᲸ Tip • Factory default value: 320✽240 (unit: pixel) 2+%674'37#.+6; 014/#. • It takes about 30 seconds to sending a picture in the size of 320✽240 to other transceivers. $#%- 200


Document Created: 2015-09-29 09:16:41
Document Modified: 2015-09-29 09:16:41
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC