User Manual 16

FCC ID: K6620345X40

Users Manual

Download: PDF
FCCID_2766351

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Set-up Menu List Explanation of Available settings Menu / Item function (Default values shown in BOLD) DISPLAY 1 DISPLAY SELECT Screen display settings ALTITUDE: ON / OFF when is pressed TIMER/CLOCK: ON / OFF briefly GPS INFO: ON / OFF 2 TARGET LOCATION Switch between the COMPASS / NUMERIC compass screen and the latitude and longitude display screen when using the GPS and GM functions 3 BACKGROUND Set the display ORANGE / GREEN / BLUE / PURPLE / COLOR background color GRAY 4 BAND SCOPE Scope Display width NARROW / WIDE setting 5 LCD BRIGHTNESS Touch panel brightness MIN / 2 / 3 / 4 / 5 / 6 / MAX 6 LCD CONTRAST Touch panel contrast -3 / -2 / -1 / 0 / +1 / +2 / +3 7 TIME/VDD Time / Voltage Display TIME / VDD setting TX/RX MODE Setting the signal format AUTO (FM) / FM / NARROW FM / AM in the analog mode DIGITAL 1 AMS TX MODE Set the AMS TX M / TX FM FIXED / TX DN FIXED / transmission mode TX VW FIXED / AUTO 2 SQL TYPE Digital mode Squelch OFF / CODE / BREAK Customize Menu Settings and User Preferences type setting 3 SQL CODE Squelch code setting in CODE: 001 to 126 the digital mode 4 DIGITAL POPUP TIME Information screen pop- OFF / 2 sec / 4 sec / 6 sec / 8 sec / 10 sec / up time 20 sec / 30 sec / 60 sec / CONTINUE 5 LOCATION SERVICE Own (MY) position ON / OFF display setting in the Refer to the separate Operating Manual digital mode GM Edition for details on the functions. 6 STANDBY BEEP Standby Beep setting ON / OFF 7 DSP VERSION DSP version display Ver. 2.** (cannot be edited; differs depending on the time of release) AUDIO 1 SUB BAND MUTE Sub-band mute setting OFF / ON 2 MIC GAIN Microphone sensitivity MIN / LOW / NORMAL / HIGH / MAX setting MEMORY 1 ALPHA TAG SIZE Display size setting of SMALL / LARGE memory channel tag 2 MEM SCAN TYPE Scanning method ALL MEM / SELECT MEM setting during memory scan SIGNALING 1 TONE SQL FREQ Tone frequency 67.0Hz - 254.1 Hz 88.5 Hz (CTCSS) 2 DCS CODE DCS code setting 023 - 754 3 AUTO DIALER DTMF code automatic OFF / ON transmission setting 4 DTMF MEMORY DTMF code registration 1 - 9 ways 16 characters each 164

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Set-up Menu List Explanation of Available settings Menu / Item function (Default values shown in BOLD) SIGNALING 5 PAGER CODE Pager individual code RX CODE : 01 - 50 05 setting RX CODE 2: 01 - 50 47 TX CODE 1: 01 - 50 05 TX CODE 2: 01 - 50 47 6 PRG REV TONE User programmed 300 Hz - 3000 Hz 1500 Hz reverse tone frequency 7 BELL RINGER Recall sound length OFF / 1 time / 3 times / 5 times / 8 times / setting CONTINUOUS 8 SQL EXPANSION Separate squelch type OFF / ON setting for transmit and receive 9 WX ALERT Weather alert operation OFF / ON (USA Version Only) setting SCAN 1 DUAL WATCH STOP Setting the signal AUTO / HOLD reception method 2 SCAN DIRECTION Scanning direction UP / DOWN setting 3 SCAN RESUME Set the resume BUSY / HOLD / 1 sec / 3 sec / 5 sec operation after scan stop GM 1 RANGE RINGER Bell sound setting OFF / ON when checking for Customize Menu Settings and User Preferences stations within sphere of communications 2 RADIO ID Specific ID display by - (cannot be edited) transceiver * Refer to the separate Operating Manual GM Edition for details on the functions. WIRES X 1 RPT/WIRES FREQ Setting of operating MANUAL / PRESET frequency in repeater / WIRES-X PRESET FREQUENCY Registration of the 144.000 - 146.000 144.620 preset frequency 2 SEARCH SETUP Setting the WIRES HISTORY / ACTIVITY ROOM selection method 3 EDIT CATEGORY TAG Editing the category tag C1 - C5 4 REMOVE ROOM/NODE Deletion of the C1 - C5 registered categories * Refer to the separate Operating Manual WIRES-X Edition for details on the functions. CONFIG 1 DATE & TIME ADJUST Setting the date and time - 2 DATE & TIME FORMAT Setting the date and DATE: mmm/dd/yyyy / time display formats yyyy/mmm/dd / dd/mmm/yyyy / yyyy/dd/mmm TIME: 24 hour / 12 hour 3 TIME ZONE Time zone setting UTC±14: 00 (0.5 h interval) UTC +0: 00 4 AUTO RPT SHIFT Auto repeater shift setting OFF / ON 5 RPT SHIFT Repeater shift direction OFF / − / + setting (Differs depending on frequency) 165

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Set-up Menu List Explanation of Available settings Menu / Item function (Default values shown in BOLD) CONFIG 6 RPT SHIFT FREQ Repeater TX offset 0.00 - 99.95 MHz setting (Differs depending on frequency) 7 FM AM STEP Channel step setting AUTO / 5.00 KHz / 6.25 KHz / 10.00 KHz / 12.50 KHz / 15.00 KHz / 20.00 KHz / 25.00 KHz / 50.00 KHz / 100.00 KHz 8 BEEP Beep setting OFF / LOW / HIGH 9 CLOCK TYPE Clock shift setting A/B 10 MIC PROGRAM KEY Microphone P buttons OFF (disable the P button) / BAND SCOPE / setting SCAN / HOME / DCS CODE / TONE FREQ / RPT SHIFT / REVERSE / TX POWER / SQL OFF / T-CALL / VOICE / D_X / WX / S-LIST / MSG / REPLY / M-EDIT P1: SQL OFF (T-CALL: European version) P2: HOME P3: D_X P4: TX POWER 11 RX COVERAGE Reception range NORMAL / WIDE expansion setting 12 UNIT Display unit setting METRIC / INCH (Depends on the transceiver version) 13 APO Automatic power OFF OFF / 0.5 hour - 12.0 hour operating time Customize Menu Settings and User Preferences 14 TOT TX time out setting OFF / 1 min - 5 min - 30 min 15 Bluetooth PAIRING PIN code setting and 0000 - 9999 6111 pairing start 16 GPS DATUM GPS function positioning WGS-84 / TOKYO MEAN selection 17 GPS DEVICE GPS receiver selection INTERNAL / EXTERNAL 18 GPS LOG GPS access time setting OFF / 1 sec - 60 sec DATA 1 COM PORT SETTING COM port setting SPEED: 4800 bps / 9600 bps / 19200 bps / 38400 bps / 57600 bps OUTPUT: OFF (camera) / GPS OUT / PACKET / WAYPOINT WP FORMAT: NMEA 6 / NMEA 7 / NMEA 8 / NMEA 9 WP FILTER: ALL / MOBILE / FREQUENCY / OBJECT/ITEM / DIGIPEATER / VoIP / WEATHER / YAESU / CALL RINGER / RNG RINGER 2 DATA BAND SELECT APRS/DATA band APRS: MAIN BAND / SUB BAND / selection setting A-BAND FIX / B-BAND FIX / A=TX/B=RX / A=RX/B=TX DATA: MAIN BAND / SUB BAND / A-BAND FIX / B-BAND FIX / A=TX/B=RX / A=RX/B=TX 3 DATA SPEED APRS/DATA APRS: 1200 bps / 9600 bps communication baud DATA: 1200 bps / 9600 bps rate setting 166

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Set-up Menu List Explanation of Available settings Menu / Item function (Default values shown in BOLD) DATA 4 DATA SQUELCH Squelch detection APRS: RX BAND / TX/RX BAND setting DATA: RX BAND / TX/RX BAND TX: ON / OFF APRS 1 APRS COMPASS APRS compass display NORTH UP / HEADING UP orientation 2 APRS DESTINATION Model code display APY400 Non-editable 3 APRS FILTER Filter function setting Mic-E: ON / OFF POSITION: ON / OFF WEATHER: ON / OFF OBJECT: ON / OFF ITEM: ON / OFF STATUS: ON / OFF OTHER: ON / OFF RANGE LIMIT: 1 mi - 3000 mi / OFF ALT.NET: ON / OFF 4 APRS MESSAGE TEXT Standard message text 1 to 8 ch input 5 APRS MODEM APRS function ON/OFF OFF / ON setting 6 APRS MUTE Band B AF mute setting OFF / ON for APRS Customize Menu Settings and User Preferences 7 APRS POP-UP Display time setting BEACON: OFF / 3 sec / 5 sec / 10 sec / for pop-up display of HOLD beacons and messages MESSAGE: OFF / 3 sec / 5 sec / 10 sec / HOLD MYPACKET: OFF / ON 8 APRS POP-UP COLOR Screen color setting CHECK OFF / GREEN / BLUE / for pop-up display of ORANGE / PURPLE / SKY-BLUE / beacons YELLOW / AMBER / WHITE 1 BEACON: CHECK OFF 2 MOBILE: CHECK OFF 3 OBJECT/ITEM: CHECK OFF 4 CAL RINGER: CHECK OFF 5 RNG RINGER: CHECK OFF 6 MESSAGE: CHECK OFF 7 GRP/BULT: CHECK OFF 8 MY PACKET: CHECK OFF 9 APRS RINGER Bell sound setting at TX BEACON: ON / OFF beacon arrival TX MESSAGE: ON / OFF RX BEACON: ON / OFF RX MESSAGE: ON / OFF MY PACKET: ON / OFF CALL RINGER: ON / OFF RNG RINGER: 1km - 100km / OFF MSG VOICE: ON / OFF 10 APRS RINGER (CALL) Call sign setting for 1 - 8 stations CALL RINGER 167

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Set-up Menu List Explanation of Available settings Menu / Item function (Default values shown in BOLD) APRS 11 APRS TX DELAY Data transmit delay time 100 ms / 150 ms / 200 ms / 250 ms / setting 300 ms / 400 ms / 500 ms / 750 ms / 1000 ms 12 APRS UNITS APRS display unit 1 POSITION: dd°mm.mm' / dd°mm'ss'' setting 2 DISTANCE: km / mile 3 SPEED: km/h / mph / knot 4 ALTITUDE: m / ft 5 BARO: hPa / mb / mmHg / inHg 6 TEMP: °C / °F 7 RAIN: mm / inch 8 WIND: m/s / mph / knot 13 BEACON INFO Transmit beacon AMBIGUITY: OFF / 1 - 4 digit SELECT information setting SPEED/COURSE: ON / OFF ALTITUDE: ON / OFF 14 BEACON STATUS Status text input setting SELECT: TEXT 1 - 5 / OFF TEXT TX RATE: 1/1 - 1/8 / 1/2 (FREQ) - 1/8 (FREQ) TEXT 1 - 5: NONE / FREQUENCY / FREQ & SQL & SHIFT 15 BEACON TX Beacon automatic AUTO: OFF / ON transmit / manual INTERVAL: 30 sec - 60 min 5 min transmission switch PROPORTIONAL: ON / OFF Customize Menu Settings and User Preferences DECAY: ON / OFF LOW SPEED: 1 - 99 3 RATE LIMIT: 5 sec - 180 sec 30 sec 16 DIGI PATH SELECT Digital repeater route OFF / WIDE 1-1 / WIDE 1-1,WIDE 2-1 / setting PATH 1 - PATH 4 / FULL 1 / FULL 2 17 DIGI PATH 1 Digital repeater route ADDRESS 1: - address setting ADDRESS 2: - 18 DIGI PATH 2 ADDRESS 1: - ADDRESS 2: - 19 DIGI PATH 3 ADDRESS 1: - ADDRESS 2: - 20 DIGI PATH 4 ADDRESS 1: - ADDRESS 2: - 21 DIGI PATH FULL 1 Digital repeater route ADDRESS 1: - address setting ADDRESS 2: - ADDRESS 3: - ADDRESS 4: - ADDRESS 5: - ADDRESS 6: - ADDRESS 7: - ADDRESS 8: - 22 DIGI PATH FULL 2 ADDRESS 1: - ADDRESS 2: - ADDRESS 3: - ADDRESS 4: - ADDRESS 5: - ADDRESS 6: - ADDRESS 7: - ADDRESS 8: - 168

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Set-up Menu List Explanation of Available settings Menu / Item function (Default values shown in BOLD) APRS 23 CALLSIGN (APRS) My call sign setting - 24 MESSAGE GROUP Group filter setting for GROUP 1: ALL✽✽✽✽✽✽ received messages GROUP 2: CQ✽✽✽✽✽✽✽ GROUP 3: QST✽✽✽✽✽✽ GROUP 4: YAESU✽✽✽✽ GROUP 5: - GROUP 6: - BULLETIN 1: BLN?✽✽✽✽✽ BULLETIN 2: BLN? BULLETIN 3: BLN? 25 MESSAGE REPLY Automatic response REPLY: OFF / ON setting of received CALLSIGN: ✽✽✽✽✽✽-✽✽ messages REPLY TEXT: - 26 MY POSITION SET My position setting GPS / MANUAL 27 MY POSITION My position manual LAT: N 0°00. 00' (' 00'') setting LON: E 0°00. 00' (' 00'') 28 MY SYMBOL My symbol setting ICON 1: [/>] Car ICON 2: [/R] REC.Vehicle ICON 3: [/-] House QTH (VHF) USER: [YY] Yaesu Radios 29 POSITION COMMENT Position comment Off Duty / En Route / In Service / setting Returning / Committed / Special / Priority / Custom 0 - 6 / Emergency! Customize Menu Settings and User Preferences 30 Smart Beaconing Smart beaconing setting 1 STATUS: OFF / TYPE 1 / TYPE 2 / TYPE 3 2 LOW SPEED: 2 - 30 5 3 HIGH SPEED: 3 - 90 70 4 SLOW RATE: 1 - 100 min 30 min 5 FAST RATE: 10 - 180 sec 120 sec 6 TURN ANGLE: 5 - 90° 28° 7 TURN SLOPE: 1 - 255 26 8 TURN TIME: 5 - 180 sec 30 sec 31 SORT FILTER Sort function / filter SORT: TIME / CALLSIGN / DISTANCE function setting FILTER : ALL / MOBILE / FREQUENCY / OBJECT/ITEM / DIGIPEATER / VoIP / WEATHER / YAESU / OTHER PACKET / CALL RINGER / RANGE RINGER / 1200 bps / 9600 bps 32 VOICE ALERT Voice alert function VOICE ALERT: NORMAL / TONE SQL / setting DCS / RX-TSQL / RX-DCS TONE SQL: 67.0 Hz - 254.1 Hz 100.0 Hz DCS: 023 - 754 023 * Refer to the separate Operation Manual APRS Edition for details on the functions. SD CARD 1 BACKUP Reading and writing Write to SD / Read from SD information of the radio to the micro-SD card 2 GROUP ID Reading and writing Write to SD / Read from SD GROUP ID information to the micro-SD card 169

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Set-up Menu List Explanation of Available settings Menu / Item function (Default values shown in BOLD) SD CARD 3 FORMAT Initializing the micro-SD - card OPTION 1 USB CAMERA Picture size / picture PICTURE SIZE: 160 ✽ 120 / 320 ✽ 240 quality setting for the PICTURE QUALITY: LOW / NORMAL / microphone with camera HIGH 2 Bluetooth Bluetooth headset AUDIO: AUTO / FIX setting BATTERY: NORMAL / SAVE VOX: ON /OFF GAIN: HIGH / LOW 3 VOICE MEMORY Voice memory function PLAY/REC: FREE 5 min / LAST 30 sec setting ANNOUNCE: AUTO / OFF / MANUAL LANGUAGE: JAPANESE / ENGLISH VOLUME: HIGH / MID / LOW RX MUTE: ON / OFF RESET/CLONE 1 FACTORY RESET Return all settings to - default settings when shipped 2 PRESET Preset registration - 3 RECALL PRESET Recall preset - 4 MEM CH RESET Erasing registered - memory channels Customize Menu Settings and User Preferences 5 MEM CH SORT Sorting registered - memory channels 6 APRS RESET Return APRS settings - to default settings when shipped 7 CLONE Copy all saved data This radio → other / Other → This radio CALLSIGN CALLSIGN My call sign setting - 170

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Set-up Menu Screen display settings Select the screen to be displayed Set the type of screen to be displayed when pressing briefly. 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [DISPLAY] 5'672/'07 &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 3 Touch [1 DISPLAY SELECT] &+52.#; The display setting screen will be displayed. Ჹ &+52.#;5'.'%6 Ż Ჺ 6#4)'6.1%#6+10 %1/2#55 ᲻ $#%-)4170&%1.14 1 4 #0)' ᲼ $#0&5%12' 9+&' $#%- Customize Menu Settings and User Preferences 4 Touch the item to be displayed &+52.#; Select from “ALTITUDE”, “TIMER/CLOCK” and “GPS Ჹ &+52.#;5'.'%6 INFO”, the screen that you would like to display. #.6+67&' 1 (( 6+/'4%.1%- 1 (( Each time the item is touched, the setting will switch )25+0(1 1 (( between “ON” and OFF”. $#%- 5 Set the other screens as well Repeat Step 4 and set the other screens as well. 6 Press for one second or longer The screen to be displayed will be set and the display will return to the previous screen. Tip Factory default value: All screens are set to “OFF” 171

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Set-up Menu Switching between COMPASS and POSITION INFORMATION screens When using the GPS and GM functions, the screen will switch between the “Compass Screen” and the “Position Information (Latitude and Longitude) Display Screen”. 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [DISPLAY] 5'672/'07 &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' Ჹ &+52.#;5'.'%6 Ż 3 Touch [2 TARGET LOCATION] to select the display Ჺ 6#4)'6.1%#6+10 %1/2#55 content ᲻ $#%-)4170&%1.14 1 4 #0)' Each time this symbol is touched, the setting will ᲼ $#0&5%12' 9+&' switch between “COMPASS” and “NUMERIC”. $#%- COMPASS: The compass screen will be displayed. NUMERIC:  The position information (latitude and longitude) display screen will be displayed. Tip Factory default value: COMPASS Customize Menu Settings and User Preferences 4 Press for one second or longer The display contents will be set and the display will return to the previous screen. Setting the display background color The display background color can be selected from the following 5 colors. • Orange • Green • Blue • Purple • Grey Refer to “Changing the background color of the frequency display area” ( P.60) for details. Setting the band scope display width The frequency bandwidth and memory channel number to be displayed when band scope is running can be set. 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [DISPLAY] 5'672/'07 &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 172

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Set-up Menu ᲻ $#%-)4170&%1.14 1 4 #0)' 3 Touch [4 BAND SCOPE] to select the frequency width ᲼ $#0&5%12' 9+&' The frequency bandwidth will switch between “WIDE” $#%- and “NARROW” each time this symbol is touched. WIDE: The frequency bandwidth will be displayed using a wide search width. NARROW: The frequency bandwidth will be displayed using a narrow search width. VFO mode Memory mode WIDE ±25 steps ±25 channels NARROW ±12 steps ±5 channels Tip Factory default value: WIDE 4 Press for one second or longer The bandwidth of the frequency will be set and the display will return to the previous screen. Setting the display brightness The brightness of the touch panel can be set. Refer to “Adjusting the display brightness” ( P.58) for details. Customize Menu Settings and User Preferences Setting the display contrast The contrast of the touch panel can be adjusted. Refer to “Adjusting the display contrast” ( P.58) for details. Switching the time display and the voltage display The display at the top right of the display can be changed between “Time Display” and “Voltage Display”. 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [DISPLAY] 5'672/'07 &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 173

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Set-up Menu Ჾ .%&%1064#56 ⌽ 3 Touch [7 TIME/VDD] to select the display content Ჿ 6+/'8&& 6+/' The display content changes between “TIME” and $#%- “VDD” each time the symbol is touched. TIME: The time will be displayed. VDD: The voltage will be displayed. Tip Factory default value: TIME 4 Press for one second or longer The display content will be set and the display will return to the previous screen. Transmit and receive settings Setting the signal format The radio signal format can be selected from “FM”, “AM” and “NARROW FM” in the analog mode. Refer to “Changing the radio signal format” ( P.46) for details. Setting the AMS transmission mode When operating in the AMS function, the transmit mode may be selected: 1 Press for one second or longer Customize Menu Settings and User Preferences The set-up menu will be displayed. 2 Touch [TX/RX] 5'672/'07 &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 3 Touch [DIGITAL] 6:4: /1&' #761 (/ &+)+6#. Ż #7&+1 Ż $#%- 174


Document Created: 2015-09-29 09:10:20
Document Modified: 2015-09-29 09:10:20
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC