User Manual 11

FCC ID: K6620345X40

Users Manual

Download: PDF
FCCID_2766138

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the DTMF Function 7 Touch the character keys to input the DTMF code Ჽ Ჿ Ჿ Ჿ Ჿ& Tip The DTMF code can also be input using the character Ჹ Ჺ ᲻ # keys on the microphone. 8 Touch [ENT] ᲼ Ჽ Ჾ $ The DTMF code will be set. Ჿ ᳀ ᳁ % 5RCEG Tip Repeat Steps 5 to 8 when registering additional numbers ᳂  & '06 in the other channels.. 9 Press for one second or longer The DTMF code will be set and the display will return to the previous screen. Tip The display can also be returned to the previous screen by touching [BACK] twice. Transmitting the registered DTMF code 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [SIGNALING] 5'672/'07 The menu list will be displayed. &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 3 Turn , or touch the screen to select [3 AUTO DIALER] 4 Touch [3 AUTO DIALER] to select “ON” 5+)0#.+0) The auto dialer will switch between “ON” and “OFF” Ჹ 610'53.(4'3 ᳀ ᳀  Ჽ *\ each time it is touched. Ჺ &%5%1&' ᲸᲺ᲻ 5 Press for one second or longer ᲻ #761&+#.'4 1 (( ᲼ &6/(/'/14; Ż The display will return to the previous screen. $#%- Tip The display can also be returned to the previous screen by touching [BACK] twice. 6 Press The function menu will be displayed. Convenient Functions 7 Touch [DTMF] ᲽᲸᲸ 61-;1 Ჺ ᲻ The character will turn orange in color. ᲼᲻᲻ ᳀ᲾᲸ Tip When [DTMF] is not displayed in the menu, use [BACK] 8 Ჹ/Ჺ ᳀ 5 3 ;1.- 1 * /#76' /# 5%12' or [FWD] to switch the menu. $#%- Ჹ 53. Ჸ Ჸ (9& ᲼ Ჽ Ჾ&6/( 01 +5' 8 / 53. / 76' 5%12' 113

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the DTMF Function 8 Turn to select the DTMF code ᲽᲸᲸ 61-;1 Ჺ ᲻ 9 Press the microphone [PTT] ᲼᲻᲻ ᳀ᲾᲸ The DTMF code will be sent out automatically. 8 Ჹ/Ჺ ᳀ 5 3 ;1.- 1 * /#76' /# 5%12' $#%- Ჹ 53. Ჸ Ჸ (9& ᲼ Ჽ Ჾ&6/( 01 +5' 8 / 53. / 76' 5%12' 10 Release the microphone [PTT] The transmission will continue until the DTMF signal is sent out. Sending out the DTMF code manually 1 Press and hold down the microphone [PTT] and press [0] to [9], [✽], [#], [A] to [D] 2 Release the microphone [PTT] The transmission will continue until the DTMF signal is sent out. Convenient Functions 114

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Timer Function Using the stopwatch function This radio is equipped with a lap timer and countdown timer. These can be used by switching to the timer / clock screen. Displaying the timer / clock screen 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [DISPLAY] 5'672/'07 The menu list will be displayed. &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 3 Turn , or touch the screen to select [1 DISPLAY SELECT] 4 Touch [1 DISPLAY SELECT] &+52.#; The screen for setting the various screens on or off Ჹ &+52.#;5'.'%6 Ż will be displayed. Ჺ 6#4)'6.1%#6+10 %1/2#55 ᲻ $#%-)4170&%1.14 1 4 #0)' ᲼ $#0&5%12' 9+&' $#%- 5 Touch [TIMER/CLOCK] to select “ON” &+52.#; Each time this is touched, the setting will switch Ჹ &+52.#;5'.'%6 between “OFF” and “ON”. #.6+67&' 1 (( 6+/'4%.1%- 1 (( 6 Press for one second or longer )25+0(1 1 (( The display will return to the previous screen. $#%- Tip The display can also be returned to the previous screen by touching [BACK] twice. 7 Press twice briefly 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ ᲽᲸᲸ ᲼ ᲻ ᲻  Ჸ The timer/clock screen will be displayed. Tip The screen will change in the following sequence each time is pressed when both the altitude display screen Ჹ Ჸ Ჸ᳁ Convenient Functions and GPS screen are “ON”. Normal frequency display → Compass/Lat&Lon display / 1&' Ჺ Ჸ Ჹ ᲻ #7) Ჺ Ჸ screen → Altitude display screen → Timer/Clock screen → GPS screen 115

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Timer Function Using the lap timer 1 Display the timer / clock screen 2 Touch [MODE] 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ ᲽᲸᲸ ᲼ ᲻ ᲻  Ჸ The lap timer will be displayed. Ჹ Ჸ Ჸ᳁ / 1&' Ჺ Ჸ Ჹ ᲻ #7) Ჺ Ჸ 3 Touch [START] 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ ᲽᲸᲸ ᲼ ᲻ ᲻  Ჸ The timer will start. 6+/'4 ᲸᲸ Ჸ  ᲸᲸ ᲸᲸ Ჸ / 1&' 56#46 4'5'6 4 Touch [LAP] 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ ᲽᲸᲸ ᲼ ᲻ ᲻  Ჸ The lap time will be saved in the memory each time it 6+/'4 is touched. ᲸᲸ Ჸ  Tip Up to 99 lap times can be saved in the memory. ᲸᲸ ᲸᲸ Ჸ᲻ / 1&' 5612 .#2 5 Touch [STOP] 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ ᲽᲸᲸ ᲼ ᲻ ᲻  Ჸ The timer will stop. 6+/'4 ᲸᲸ Ჸ᲻ Ჺ Ჹ ᲸᲸ ᲸᲸ Ჸ᲻ / 1&' 5612 .#2 The lap times and split times will be erased when 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ Convenient Functions [RESET] is touched. ᲽᲸᲸ 6+/'4 ᲼ ᲻ ᲻  Ჸ ᲸᲸ ᲸᲺ Ჽ ᳁ ᲸᲸ Ჹ ᲻ Ჽ Ჽ / 1&' 56#46 4'5'6 116

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Timer Function The lap time measured in the past will be displayed 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ when [RECALL] is touched. When there are multiple ᲽᲸᲸ 6+/'4 ᲼ ᲻ ᲻  Ჸ lap times, touch [] or [] to switch between the lap times. ᲸᲸ ᲸᲺ Ჽ ᳁ ᲸᲸ Ჹ ᲻ Ჽ Ჽ / 1&' 6 Touch briefly twice The display will return to the previous screen. Tips • Touch [RECALL] when the previous lap times are being displayed and then turn twice. • The screen will change in the following sequence each time is pressed when both the altitude display screen and GPS screen are “ON”.   Normal frequency display → Compass/Lat&Lon display screen → Altitude display screen → Timer/Clock screen → GPS screen Using the countdown timer 1 Display the timer / clock screen 2 Touch [MODE] twice 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ ᲽᲸᲸ ᲼ ᲻ ᲻  Ჸ The countdown timer will be displayed. Ჹ Ჸ Ჸ᳁ / 1&' Ჺ Ჸ Ჹ ᲻ #7) Ჺ Ჸ 3 Touch [SETUP] 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ ᲽᲸᲸ ᲼ ᲻ ᲻  Ჸ The “Hour” of the start time will blink. %1706&1906+/'4 4 Turn to set the hour Ჸ Ჸ  Ჸ Ჸ Ჸ Tips • The hour can be set between 00 and 99. • The time can also be set by touching [+] or [-]. Ჸ Ჸ   / 1&' 56#46 4'5'6 5 Touch [SETUP] 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ ᲽᲸᲸ ᲼ ᲻ ᲻  Ჸ The “Hour” will be set, and “Minute” will blink. Convenient Functions %1706&1906+/'4 6 Turn to set the minute Ჸ Ჹ  Ჸ Ჸ Ჸ Tip The time can also be set by touching [+] or [-]. Ჸ Ჸ   $#%- ᴃ ᴁ 117

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Timer Function 7 Touch [SETUP] 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ ᲽᲸᲸ ᲼ ᲻ ᲻  Ჸ The “Minute” will be set and the set time will be %1706&1906+/'4 displayed in the counter. Ჸ Ჹ  Ჸ Ჸ Ჸ Ჸ Ჸ   $#%- ᴃ ᴁ 8 Touch [START] 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ ᲽᲸᲸ ᲼ ᲻ ᲻  Ჸ The countdown timer will start. %1706&1906+/'4 Ჸ Ჹ ᲸᲸ Ჸ Ჸ Ჸ Ჸ  Ჸ  / 1&' 56#46 4'5'6 When the set time has passed, a beep will sound 8( 1 Ჹ ᲼ Ჽ Ჸ Ჸ ᲽᲸᲸ ᲼ ᲻ ᲻  Ჸ and the time will be displayed as “00:00’00” in green %1706&1906+/'4 characters. Ჸ Ჹ ᲸᲸ Ჸ Ჸ Ჸ Touch [STOP] to pause the timer in between. Touch [START] to restart the countdown and touch ᲸᲸ Ჸ Ჸ ᲸᲸ [RESET] to measure from the start again. / 1&' 56#46 4'5'6 9 Press briefly twice The display will return to the previous screen. Tip The screen will change in the following sequence each time is pressed when both the altitude display screen and GPS screen are “ON”. Normal frequency display → Compass/Lat&Lon display screen → Altitude display screen → Timer/Clock screen → GPS screen Convenient Functions 118

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Timer Function Using the APO function When the APO (Automatic Power-off) function is set to ON, the power supply to the radio will be automatically switched off when there has been no operation for a preset period of time. A notification beep will sound one minute before the power is turned off. This helps to prevent the battery from being used up when you forget to switch the radio off when connected to a car battery. 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [CONFIG] 5'672/'07 The menu list will be displayed. &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 3 Turn , or touch the screen to select [13 APO] 4 Touch [13 APO] %10(+) The screen for selecting “ON”, “OFF” and the time ᲹᲹ 4:%18'4#)' 014/#. until the power is turned off after operations will be ᲹᲺ 70+6 /'64+% displayed. Ჹ᲻ #21 1(( Ჹ᲼ 616 1(( $#%- 5 Touch [ON] %10(+) 6 Touch [+] or [-] to select the time until the power Ჹ᲻ #21 supply is switched off Ჹ Ჸ Ჽ JQWT The time will change by one step each time it is touched. The time step can be selected from the 10 1(( following 14 steps. $#%- “0.5hour” “1.0hour” “1.5hour” “2.0hour” “3.0hour” “4.0hour” “5.0hour” “6.0hour” “7.0hour” “8.0hour” “9.0hour” “10.0hour” “11.0hour” “12.0hour” 7 Press twice briefly Convenient Functions The APO function will be switched on and the display will return to the previous screen. Tip The display can also be returned to the previous screen by touching [BACK] twice. 119


Document Created: 2015-09-29 09:07:28
Document Modified: 2015-09-29 09:07:28
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC