User Manual 7

FCC ID: K6620345X40

Users Manual

Download: PDF
FCCID_2766134

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Memory 4 Touch [TX IN] Ჸ ᲸᲺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ The number input screen will be displayed. 3 9 ' 4 6 ; 7 + 1 2 %CRU # 5 & ( ) * , - . < : % 8 $ 0 / $#%- ᲹᲺ᲻ @ #$% 5RCEG '06 5 Enter the transmit frequency Ჸ ᲸᲺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ  The entered frequency will be displayed on the right Ჹ Ჺ ᲻ # side of [T] at the top of the screen. ᲼ Ჽ Ჾ $ $#%- Ჿ ᳀ ᳁ % 5RCEG ᳂  & '06 6 Touch [ENT] Ჸ ᲸᲺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ Ჹ ᲼ Ჽ ᲻ Ჾ Ჸ The display will return to the memory list. Ჹ Ჺ ᲻ # ᲼ Ჽ Ჾ $ Ჿ ᳀ ᳁ % 5RCEG ᳂  & '06 7 Press to save the transmit frequency When memory writing is complete, the receive frequency will be shown in the display. Using the Memory Receiving Weather Broadcast Channels (USA version only) This radio includes the preprogrammed VHF Weather Broadcast Station Memory Channel Bank, and can receive the broadcast or the weather alert by recalling or scanning a desired channel. The following channels are stored in the weather station memory bank of this radio. Channel Frequency Channel Frequency No. No. WX01 162.550 MHz WX06 162.500 MHz WX02 162.400 MHz WX07 162.525 MHz WX03 162.475 MHz WX08 161.650 MHz WX04 162.425 MHz WX09 161.775 MHz WX05 162.450 MHz WX10 163.275 MHz This “WX” function can only be used through the programmable keys [P1] to [P4] on the microphone. 70

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Memory Assigning the “WX” function to a programmable key on the microphone 1 Press for one second or longer The set-up menu will be displayed. 2 Select and touch [CONFIG] The menu list will be displayed. 3 Select and touch [10 MIC PROGRAM KEY] The setting screen for programmable keys on the microphone will be displayed. 4 Touch the key name (P1 to P4) where the WX function is going to be assigned The functions that can be assigned will be displayed. When the [WX] is not displayed, turn to scroll the display. 5 Select and touch [WX] 6 Touch [BACK] The display will return to the setting screen for programmable keys. Recalling the weather channels Example: When “WX” is assigned to [P1] 1 Press [P1] on the microphone The WX function is activated, and the weather channel selected last time the WX function was activated will be displayed on the screen. 2 Turn to select the other channels 3 Press the [PTT] button on the microphone to search for louder stations Scanning of the channels stored in the weather station memory bank will start. Using the Memory When the scanning pauses on a station, press the [PTT] button once to halt the scan, or press it twice to restart the scan. 4 Press the [PTT] button to finish the scan 5 Press [P1] The WX function will be inactivated and the display will return to the previous screen. Listening the weather alert In the event of extreme weather disturbances, such as storms and hurricanes, the NOAA (National Oceanic and Atmospheric Administration) sends a weather alert accompanied by a 1050 Hz tone and subsequent weather report on one of the NOAA weather channels. You may disable to receive the weather alert tone using [SIGNALING]→[9 WX ALERT] in the set-up menu. 71

Application for FCC / IC Scanning FCC ID: K6620345X40 / IC: 511B-20345X40 Signal Search The FTM-400XDR/DE transceiver is equipped with a scanning function to search for memory channels and VFO frequencies for active signals. Scanning can be performed using the following four methods: VFO scan Scan for all memory channels Scan for specified memory channels Scanning the programmable memories Tip The band scope function can be used to search for active channels and show a graph. When [SCOPE] in the screen is touched, the strengths of the channels will be displayed in a graph, with the current frequency located in the center of the screen ( P.47). VFO scan 1 Select the band to be scanned, and switch to the VFO mode 2 Press briefly The function menu will be displayed. 3 Touch [SCAN] 8(1 Tip When [SCAN] is not displayed in the function menu, ᲼ ᲻ ᲻ ᲸᲸᲸ touch [BACK] and [FWD] to switch the menu. 6Z29 4 5 % #Ჹ 0Ჺ ᳀ 4 ' ;18- 1 * # / # The scan will start from low to high frequency. *+ $#%- ᲼ Ჽ Ჾ& Ჸ9 Ჸ ( 9 & Ჹ 5-+25'. 1 (( 8 / 53. / 76' 5%12' Scanning During scanning, the decimal point of the frequency 8(1 display will blink. ᲼ ᲻ ᲻ ᲸᲸᲸ When a signal is received, the scan will stop for three 6Z29 4 5 % #Ჹ 0Ჺ ᳀ 4 ' ;18- 1 * # / # seconds before starting to scan again. ᲼ Ჽ Ჾ& Ჸ9 Ჸ ( 9 & Ჹ 5-+25'. *+ $#%- Tips • The scan can also be started by pressing the [UP] or 1 (( [DWN] button on the microphone for one second or 8 / 53. / 76' 5%12' longer. • The scanning direction (UP/DOWN) can be set using [SCAN]→[2 SCAN DIRECTION] in the set-up menu. • The scanning direction can also be changed by pressing the [UP] or [DWN] button on the microphone or turning during scanning. • The action used to stop the scanning may be set using [SCAN]→[3 SCAN RESUME] in the set-up menu (refer to the next page). • The squelch level may be adjusted using the following procedure during scanning. Touch [SQL] → Turn . 72

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Signal Search ●●To stop the scanning To stop the scanning, either touch [SCAN] or press the microphone [PTT] button (the radio will not transmit in this case). Setting the receive operation when the scanning stops Any of the following three methods can be selected as the action to be taken after the scanning stops. (1) Restarts the scanning after receiving for the set amount of time. Select from one, three or five seconds. (2) Continues receiving until the signal disappears and then restart the scanning two seconds after the signal disappears (BUSY). (3) Stops the scanning to receive at that frequency (HOLD). 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [SCAN] 5'672/'07 The menu list will be displayed. &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 3 Touch [3 SCAN RESUME] to select the reception 5%#0 method Ჹ &7#.9#6%*5612 #761 The reception method will change in the following Ჺ 5%#0&+4'%6+10 72 Scanning order each time the screen is touched. ᲻ 5%#04'57/' ᲻ UGE “BUSY” → “HOLD” → “1sec” → “3sec” → “5sec” Tips • The reception method can also be selected by pressing $#%- . • Factory default value: 3 sec 4 Press for one second or longer The reception method when the scanning stops will be set and the display will return to the previous screen. Tip The settings here are applicable to “VFO Scan”, “Memory Scan” and “Programmable Memory Scan”. 73

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Signal Search Memory scan The FTM-400XDR/DE transceiver will scan the frequencies registered in the memories in the order of the memory channel number. 1 Switch to the memory mode 2 Press briefly The function menu will be displayed. 3 Touch [SCAN] ᲽᲸᲸ 61-;1 Ჺ ᲻ Tip When [SCAN] is not displayed in the function menu, ᲼᲻᲻ ᳀ᲾᲸ touch [BACK] or [FWD] to switch the menu. 6Z29 4 5 % #Ჹ 0Ჺ ᳀ 4 ' ;18- 1 * # / # The scanning will start from the lowest to the highest *+ Ჹ ᲼ Ჽ Ჾ& Ჸ9 Ჸ ( 9 & memory channel number. $ # % - 5-+25'. 1 (( 8 / 53. / 76' 5%12' During scanning, the decimal point of the frequency ᲽᲸᲸ 61-;1 Ჺ ᲻ display will blink. ᲼᲻᲻ ᳀ᲾᲸ When a signal is received, the scan will stop for three 6Z29 4 5 % #Ჹ 0Ჺ ᳀ 4 ' ;18- 1 * # / # seconds before starting to scan again. Ჹ ᲼ Ჽ Ჾ& Ჸ9 Ჸ ( 9 & *+ $ # % - 5-+25'. Tips • The scan can also be started by pressing the [UP] or 1 (( [DWN] button on the microphone for one second or 8 / 53. / 76' 5%12' longer. • The scanning direction (UP/DOWN) can be set using [SCAN]→[2 SCAN DIRECTION] in the set-up menu. • The action to be taken when scanning is stopped can be set using [SCAN]→[3 SCAN RESUME] in the set-up menu (refer to the previous page). • The squelch level may be adjusted using the following procedure during scanning. Touch [SQL] → Turn Scanning ●●To stop the scanning To stop the scanning, either touch [SCAN] or press the microphone [PTT] button (the radio will not transmit in this case). 74

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Signal Search Selecting the scanning method The scanning may be set for all memories or only specified memories. 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [MEMORY] 5'672/'07 The menu list will be displayed. &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' Ჹ #.2*# 6#)5+<' .#4)' 3 Touch [2 MEM SCAN TYPE] to select the scanning Ჺ /'/5%#0 6;2' #../'/ method The setting will switch between “ALL MEM” and “SELECT MEM” each time it is touched. $#%- ALL MEM: Scan all memories. SELECT MEM: Scan only specified memories. Tips • The scanning method can also be selected by pressing . • Factory default value: ALL MEM 4 Press for one second or longer The scanning method will be set and the display will return to the previous screen. Setting the specified memories Specify the memories to be scanned when “2 MEM SCAN TYPE” is set to “SELECT Scanning MEM” in the set-up menu. The memory can be specified using either of the following two methods: (1) Selects channels using the memory list screen (2) Specifies individual channels using the function menu screen (1) Specify memory channels using the memory list screen 1 Touch [V/M] for 2 to 3 seconds (until the beep Ჹ Ჺ᳀ ;1-1*#/# sounds) Ჹ ᲼Ჽ ᲾᲸᲸ The memory list screen will be displayed. ᲽᲸᲸ 61-;1 Ჺ ᲻ ᲼᲻᲻ ᳀ᲾᲸ 8 / 53. / 76' 5%12' 75

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Signal Search 2 Select the memory channel to be specified by turning Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ ᲸᲸ Ჺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ Ჸ Ჸ᲻  Tip The memory channel may also be selected by touching it Ჸ Ჸ᲼  on the screen. 5-+25'. $#%- &'. 3 Touch [SKIP/SEL] to display “SELECT” 1 (( The setting displayed under [SKIP/SEL] will change in the following order each time it is touched. “OFF” → “SKIP” → “SELECT” Tip Repeat Steps 2 and 3 to specify the other memories next. 4 Touch [BACK] Return to the previous screen, and “” will be displayed on the left side of the memory channel number. (2) Specify individually using the function menu screen 1 Switch to the memory mode, and recall the memory channel to be set as the specified channel 2 Press The function menu will be displayed. 3 Touch [SKIP/SEL] to display “SELECT” ᲽᲸᲸ 61-;1 Ჺ ᲻ “” will be displayed on the left side of the memory ᲼᲻᲻ ᳀ᲾᲸ channel number. 6Z29 4 5 % #Ჹ 0Ჺ ᳀ 4 ' ;18- 1 * # / # Tip When [SKIP/SEL] is not displayed in the function menu, *+ $#%- ᲼ Ჽ Ჾ& Ჸ9 Ჸ ( 9 & Ჹ 5-+25'. touch [BACK] or [FWD] to change the menu. 1 (( The setting displayed under [SKIP/SEL] will change 8 / 53. / 76' 5%12' Scanning in the following order each time it is touched. “OFF” → “SKIP” → “SELECT” Scan only the specified memory channels 1 First, select the band to be scanned, before switch to the memory mode 2 Press for one second or longer The set-up menu will be displayed. 3 Touch [MEMORY] 5'672/'07 The menu list will be displayed. &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 76

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Signal Search Ჹ #.2*# 6#)5+<' .#4)' 4 Touch [2 MEM SCAN TYPE] and select “SELECT Ჺ /'/5%#0 6;2' #../'/ MEM” The setting will switch between“ALL MEM” and “SELECT MEM” each time it is touched. $#%- 5 Press for one second or longer The display will return to the previous screen. 6 Press ᲽᲸᲸ 61-;1 Ჺ ᲻ The function menu will be displayed. ᲼᲻᲻ ᳀ᲾᲸ 7 Touch [SCAN] 5 % #Ჹ 0Ჺ ᳀ 4 ' ;18- 1 * # / # 6Z29 4 *+ The scan only those memory channels that have Ჹ ᲼ Ჽ Ჾ& Ჸ9 Ჸ ( 9 & $ # % - 5-+25'. been set to “SELECT” will be started. 5'.'%6 8 / 53. / 76' 5%12' Tips • The scan can also be started by pressing the [UP] or [DWN] button on the microphone for one second or longer. • The scan will be performed in increasing order of the memory channel number. • When a signal is received, the scanning stops for three seconds and then the scanning starts again. • To stop the scanning, either touch [SCAN] or press the microphone [PTT] button (the radio will not transmit in this case). Setting the memories to be skipped Memory channels which you do not wish to receive can be skipped during scanning. The channels to be skipped can be set using the following two methods: (1) Designate channels using the memory list screen Scanning (2) Sets channels individually using the function menu screen (1) Designating channels to be skipped using the memory list screen 1 Touch [V/M] for two to three seconds (until the beep Ჹ Ჺ᳀ ;1-1*#/# sounds) Ჹ ᲼Ჽ ᲾᲸᲸ The memory list screen will be displayed. ᲽᲸᲸ 61-;1 Ჺ ᲻ ᲼᲻᲻ ᳀ᲾᲸ 8 / 53. / 76' 5%12' 2 Turn to select the memory to be skipped Tip The memory can also be selected by touching it directly. 77

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Signal Search 3 Touch [SKIP/SEL] to display “SKIP” Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ ᲸᲸ Ჺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ The setting displayed under [SKIP/SEL] will change Ჸ Ჸ᲻  in the following order each time it is touched. Ჸ Ჸ᲼  “OFF” → “SKIP” → “SELECT” $#%- &'. 5-+25'. 1 (( Tip Repeat Steps 2 and 3 to specify the other memories next. 4 Touch [BACK] Return to the previous screen, and a blinking “” will be displayed on the left side of the memory channel number. (2) Setting channels to be skipped individually using the function menu screen 1 Switch to the memory mode, and recall the memory channels that have been set to be skipped 2 Press The function menu will be displayed. 3 Touch [SKIP/SEL] to display “SKIP” ᲽᲸᲸ 61-;1 Ჺ ᲻ A blinking “” will be displayed on the left side of the ᲼᲻᲻ ᳀ᲾᲸ memory channel number. 6Z29 4 5 % #Ჹ 0Ჺ ᳀ 4 ' ;18- 1 * # / # Tip When [SKIP/SEL] is not displayed in the function menu, *+ $#%- ᲼ Ჽ Ჾ& Ჸ9 Ჸ ( 9 & Ჹ 5-+25'. touch [BACK] or [FWD] to change the menu. 1 (( The setting displayed under [SKIP/SEL] will change 8 / 53. / 76' 5%12' in the following order each time it is touched. “OFF” → “SKIP” → “SELECT” Scanning 78

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Signal Search Scanning the programmable memories (PMS) Using the dedicated memory channel, only the frequencies within the specified frequency range will be scanned. The frequency range is registered beforehand in the PMS memory channel. Writing into the programmable memory Nine pairs (P1L/P1U through P9L/P9U) of frequency ranges can be set up in the PMS memory channels. Register the lower limit of the frequency range to be scanned into the memory channel “PL” and the upper limit into the memory channel “PU”. Memories with the same channel number “” (a number from 1 to 9) are handled as one pair of PMS channel “P”. Example: Set up a PMS channel by registering a lower frequency of 433.200 MHz and an upper frequency of 433.700 MHz in the P1 memory channel 1 Switch to the VFO mode 2 Select the frequency (433.200) to be set for the lower 8(1 limit, using Ჹ ᲼Ჽ ᲾᲸᲸ Caution The frequency to be set as the lower limit (P1L) must be lower than the upper limit (P1U). 8(1 3 Press for one second or longer ᲼ ᲻ ᲻ Ჺ ᲸᲸ The memory writing screen will be displayed. 8 / 53. / 76' 5%12' 4 Turn Ჽ ᲸᲸ  to select [P1L] 2Ჹ. ᲼ ᲻ ᲻ Ჺ Ჸ Ჸ The memory channel can also be selected by 2Ჹ7  touching it directly. 5-+25'. Scanning $#%- &'. 1 (( Tip The memory channel can be assigned with an alpha-tag name ( P.66). 5 Press The display will return to the previous screen, and the memorized frequency and memory channel number will be displayed. 6 Switch to the VFO mode 7 Select the frequency (433.700) to be set for the 8(1 upper limit, using Ჹ ᲼Ჽ ᲾᲸᲸ 8 Press for one second or longer 8(1 The memory writing screen will be displayed. ᲼ ᲻ ᲻ Ჿ ᲸᲸ 8 / 53. / 76' 5%12' 9 Turn Ჽ ᲸᲸ  to select [P1U] 2Ჹ. ᲼ ᲻ ᲻ Ჺ Ჸ Ჸ The memory channel can also be selected by 2Ჹ7 ᲼ ᲻ ᲻ Ჿ Ჸ Ჸ touching it directly. $#%- &'. 5-+25'. 1 (( Tip The memory channel can be assigned with an alpha-tag name ( P.66). 79


Document Created: 2015-09-29 09:05:03
Document Modified: 2015-09-29 09:05:03
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC