User Manual 6

FCC ID: K6620345X40

Users Manual

Download: PDF
FCCID_2766133

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Reconfiguring the Settings The settings and memory of this radio can be returned to be default factory settings when it was first shipped. 1 Press for one second or longer The set-up menu will be displayed. 2 Touch [RESET/CLONE] 5'672/'07 The menu list will be displayed. &+52.#; 6:4: /'/14; The following resets can be selected. 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# [1 FACTORY RESET]: This restores all settings to #245 5&%#4& 126+1 0 the default settings when 4'5'6 shipped from the factory. $#%- %#..5+)0 %.10' [4 MEM CH RESET]: T  his erases only the registered memory channels. *Settings in the set-up menu will not be erased. [6 APRS RESET]: This restores the APRS settings to the default value when shipped Basic Operations from the factory. 3 Touch the item to be reset 4'5'6%.10' The reset confirmation screen will be displayed. Ჹ (#%614;4'5'6 Ż Ჺ 24'5'6 Ż ᲻ 4'%#..24'5'6 Ż ᲼ /'/%*4'5'6 Ż $#%- (#%614;4'5'6 4 Touch [OK?] ᲻ 4'%#..24'5'6 1-! %CPEGᲴ Ż The settings and memory will be reset and restored ᲼ /'/%*4'5'6 Ż to the default status when shipped from the factory $#%- Tip Touch [Cancel] to stop the resetting. 61

Application for FCC / IC Using the Memory FCC ID: K6620345X40 / IC: 511B-20345X40 Frequently used frequencies and settings can be saved in the memory so that you can quickly and conveniently operate on present channel. The radio is also equipped with the following memory functions: ·· Skips memory channels that you do not wish to receive during scanning ( P.77) ·· Scans only the specified memory channels ( P.76) ·· “Programmable Memory Scan (PMS)” that scans only the specified frequency range (in the same frequency band) ( P.79) The operating frequency and other operational information can be registered to each regular memory channel, home channel, or PMS memory channel: • Operating frequency • Memory tag • Repeater information • Tone information • DCS information • Transmission power • Memory skip information (The operating mode information is not registered to the memory channels) Writing to the memory Tip The information saved in the memory may be lost due to incorrect operation, static electricity or electrical noise. Data may also be lost due to component failures and repairs. Make sure to write down the information registered in the memories on a piece of paper or by using a micro-SD card. A total of 500 channel memories each, can be used for Band A and Band B. 1 Switch to the VFO mode 2 Use to adjust the frequency to be written in the memory Using the Memory 3 Press for one second or longer Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ The memory writing screen will be displayed. Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ The frequency will be automatically displayed in the ᲸᲸ Ჺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ next empty memory channel. Ჸ Ჸ᲻  Ჸ Ჸ᲼  Tip Refer to Steps 3 to 12 in “Naming a memory channel” 5-+25'. ( P.66) when assigning a name to a memory channel. $#%- &'. 1 (( 4 Turn to select a different (if desired) memory channel Tip The memory channel can also be selected by touching it directly. 5 Press to save the data to memory ᲸᲸ Ჺ When the memory writing is completed, the Ჹ ᲼Ჽ Ჹ ᲾᲸ frequency and memory channel number will be ᲽᲸᲸ 61-;1 Ჺ ᲻ shown in the display. ᲼᲻᲻ ᳀ᲾᲸ Tips • The frequency that is already written in the memory can also be overwritten by a new frequency. 8 / 53. / 76' 5%12' • Touch [V/M] to return to the VFO mode. 62

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Memory Tips • When shipped from the factory, the frequency in memory channel 1 of Band A is set to 144.000 MHz while the frequency in memory channel 1 of Band B is set to 430.000 MHz. These can be changed to other frequencies but cannot be erased. • Names can also be assigned to the memory channels ( P.66). • 9 pairs of PMS memory channels can be written for Band A and Band B each ( P.79). Recalling the memory 1 Touch [V/M] to switch the mode 8(1 The memory channel last used will be shown in the Ჹ ᲼ Ჽ ᲸᲸᲸ display. ᲽᲸᲸ 61-;1 Ჺ ᲻ ᲼᲻᲻ ᳀ᲾᲸ 8 / 53. / 76' 5%12' ᲸᲸ Ჺ Ჹ ᲼Ჽ Ჹ ᲾᲸ ᲽᲸᲸ 61-;1 Ჺ ᲻ ᲼᲻᲻ ᳀ᲾᲸ 8 / 53. / 76' 5%12' 2 Turn to select the memory channel ᲸᲸ Ჺ Touch [V/M] again to return to the VFO mode. Ჹ ᲼Ჽ Ჹ ᲾᲸ Using the Memory Tip ᲽᲸᲸ 61-;1 Ჺ ᲻ ᲼᲻᲻ ᳀ᲾᲸ Non-registered memory channels will be skipped. 8 / 53. / 76' 5%12' Recalling the home channel 1 Press 8(1 The function menu will be displayed. ᲼᲻᲻ Ჹ ᲾᲸ 2 Switch the menu using [BACK] and [FWD] 5 % #Ჹ 0Ჺ ᳀ 4 ' ;18- 1 * # / # 6Z29 4 *+ Ჹ ᲼ Ჽ Ჾ& Ჸ9 Ჸ ( 9 & $ # % - 5-+25'. 1 (( 8 / 53. / 76' 5%12' 63

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Memory 3 Touch [HOME] 8(1 The home channel will be shown in the display. ᲼᲻᲻ Ჹ ᲾᲸ Tip Change the frequency using to return to the VFO $'#%10 Ჹ Ჺ ᳀ /5) 5.+56 ; 1 - 1$'#%10 *#/# mode. 6: Ჹ ᲼ Ჽ Ჾ. 1Ჸ) Ჸ ( 9 & $ # % - *1/' 8 / 53. / 76' 5%12' Touch [HOME] again to return to the VFO mode and *1/' display the frequency that was selected before the ᲼᲻ ᲻ ᲸᲸᲸ home channel was recalled. Ჹ Ჺ ᳀ /5) ; 1 - 1$'#%10 *#/# $'#%10 5.+56 6: Ჹ ᲼ Ჽ Ჾ. 1Ჸ) Ჸ ( 9 & $ # % - *1/' 8 / 53. / 76' 5%12' 8(1 ᲼᲻᲻ Ჹ ᲾᲸ Ჹ Ჺ ᳀ /5) ; 1 - 1$'#%10 *#/# $'#%10 5.+56 6: Ჹ ᲼ Ჽ Ჾ. 1Ჸ) Ჸ ( 9 & $ # % - *1/' 8 / 53. / 76' 5%12' Tip When shipped from the factory, the frequency in the home channel of Band A is set to 144.000 MHz while the frequency in the home channel of Band B is set to 430.000 MHz. Using the Memory Changing the frequency of the home channel The default frequency setting of the home channel when shipped from the factory can be changed. 1 Switch to the VFO mode 2 Adjust the frequency using 3 Press for one second or longer Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ The memory writing screen will be displayed. Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ ᲸᲸ Ჺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ Ჸ Ჸ᲻ Ჹ ᲼ Ჽ ᲻ Ჾ Ჸ Ჸ Ჸ᲼  5-+25'. $#%- &'. 1 (( 4 Turn to select [HOME] Ჹ ᲼ Ჽ ᲻ Ჾ Ჸ 5 Press Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ The overwrite confirmation screen will be displayed. ᲸᲸ Ჺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ Ჸ Ჸ᲻  Ჸ Ჸ᲼  5-+25'. $#%- &'. 1 (( 64

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Memory Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ 6 Touch [OK?] to confirm and store the home channel Ჸ ᲸᲹ ᲸᲸ Ჺ Ჹ ᲼ ᳀ Ჾ Ჸ Ჸ frequency 18'494+6' Ჸ Ჸ᲻  1-! %CPEGᲴ When the writing to the home channel is completed, Ჸ Ჸ᲼  the updated home channel frequency will be $#%- &'. 5-+25'. 1 (( displayed. Tip Touch [Cancel] to stop writing. *1/' Ჹ ᲼Ჽ ᲻ᲾᲸ ᲽᲸᲸ 61-;1 Ჺ ᲻ ᲼᲻᲻ ᳀ᲾᲸ 8 / 53. / 76' 5%12' Erasing the memory 1 Touch [V/M] for 2 to 3 seconds 8(1 The memory list will be displayed. Ჹ ᲼ Ჽ ᲸᲸᲸ 2 Turn to select the memory to be erased ᲽᲸᲸ 61-;1 Ჺ ᲻ ᲼᲻᲻ ᳀ᲾᲸ 8 / 53. / 76' 5%12' 3 Touch [DEL] Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ The erase confirmation screen will be displayed. Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ ᲸᲸ Ჺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ Using the Memory Ჸ Ჸ᲻  Ჸ Ჸ᲼  5-+25'. $#%- &'. 1 (( Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ 4 Touch [OK?] to confirm and delete the data ᲸᲸ Ჺ Ჹ ᲼ ᳀ Ჾ Ჸ Ჸ &'.'6' The memory will be erased, and the display will Ჸ Ჸ᲻  1-! %CPEGᲴ become an empty field. Ჸ Ჸ᲼  Tips • Touch [Cancel] to cancel the memory deletion. $#%- &'. 5-+25'. 1 (( • Repeat Steps 2 to 4 to erase additional memories. Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ Caution Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ Memory channel 1 and the home channel cannot be erased. ᲸᲸ Ჺ  Ჸ Ჸ᲻  Ჸ Ჸ᲼  5-+25'. $#%- &'. 1 (( 65

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Memory Naming the memory Names (memory tags) such as call signs and the names of the broadcasting stations can be assigned to the memory channels and home channel. Up to eight of the following characters can be entered as a memory tag. • English letters (capital/small letters), numbers, symbols Example: Assigning a name like “YM Grp01” 1 Touch [V/M] for 2 to 3 seconds 8(1 The memory list will be displayed. Ჹ ᲼ Ჽ ᲸᲸᲸ ᲽᲸᲸ 61-;1 Ჺ ᲻ ᲼᲻᲻ ᳀ᲾᲸ 8 / 53. / 76' 5%12' 2 Select the memory channel the name is going to be Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ assigned to Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ Tip Select the home channel when assigning a name to the ᲸᲸ Ჺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ home channel. Ჸ Ჸ᲻  3 Press for one second or longer Ჸ Ჸ᲼  The character input screen will be displayed. $#%- &'. 5-+25'. 1 (( Tip Touch the memory channel or press for one second or longer to display the character input screen. 4 Touch [Caps] first, and then touch [Y] and [M] Ჸ ᲸᲺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ [Caps] will turn orange, enabling capital letters to be Using the Memory 3 9 ' 4 6 ; 7 + 1 2 entered. %CRU # 5 & ( ) * , - . < : % 8 $ 0 / $#%- ᲹᲺ᲻ @ #$% 5RCEG '06 5 Touch [Space] Ჸ ᲸᲺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ ;/ 6 Touch [G] 3 9 ' 4 6 ; 7 + 1 2 %CRU # 5 & ( ) * , - . < : % 8 $ 0 / $#%- ᲹᲺ᲻ @ #$% 5RCEG '06 7 Touch [Caps] first, and then touch [R] and [P] Ჸ ᲸᲺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ ; / ) [Caps] will turn white, enabling lower case letters to 3 9 ' 4 6 ; 7 + 1 2 be entered. %CRU # 5 & ( ) * , - . < : % 8 $ 0 / $#%- ᲹᲺ᲻ @ #$% 5RCEG '06 66

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Memory 8 Touch [123] Ჸ ᲸᲺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ ; / )TR The number and symbols input screen will be 3 9 ' 4 6 ; 7 + 1 2 displayed. %CRU # 5 & ( ) * , - . 9 Touch [0] and then [1] < : % 8 $ 0 / $#%- ᲹᲺ᲻ @ #$% 5RCEG '06 10 Touch [ENT] Ჸ ᲸᲺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ ; /  )T R ᳂ Ჹ The name will be stored in memory and displayed on Ჹ Ჺ ᲻ ᲼ Ჽ Ჾ Ჿ ᳀ ᳁ ᳂ the right side of the frequency.       "    !  %CPEGᲴ ᲹᲺ᲻ @ #$% 5RCEG '06 11 Touch [BACK] Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ The display will return to the previous screen. Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ ᲸᲸ Ჺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ ;/)TR ᳂ Ჹ Ჸ Ჸ᲻  Ჸ Ჸ᲼  5-+25'. $#%- &'. 1 (( Changing the method of the memory tag display Using the Memory The method of displaying the frequency and name assigned to the memory can be selected for each channel. 1 Switch to the memory mode 2 Select the memory channel that you want to change the memory tag display method on 3 Press for one second or longer The set-up menu will be displayed. 4 Touch [MEMORY] 5'672/'07 The menu list will be displayed. &+52.#; 6:4: /'/14; 5+)0#.+0) 5%#0 9 Ჰ 4'5 %10(+) &#6# #245 5&%#4& 126+1 0 4'5'6 $#%- %#..5+)0 %.10' 67

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Memory 5 Touch [1 ALPHA TAG SIZE] to select the memory / '/ 14; tag display size Ჹ #.2*# 6#)5+<' .#4)' The setting will switch between “SMALL” and Ჺ /'/5%#0 6;2' #../'/ “LARGE” each time it is touched. “SMALL”: D isplay the memory tag in small-sized characters and the frequency in large- $#%- sized characters. “LARGE”: Display the memory tag in large-sized characters and the frequency in small- sized characters. Tip Factory default value: LARGE 6 Press for one second or longer The size of the memory tag display will be set and the display will return to the previous screen. Tip The display method can also be changed by pressing for one second or longer in the memory mode. LARGE SMALL Ჹ Ჺ᳀ Ჹ ᲼Ჽ ᲾᲸᲸ Ჹ Ჺ᳀ ;1-1*#/# ;1-1*#/# Ჹ ᲼Ჽ ᲾᲸᲸ ᲽᲸᲸ 61-;1 Ჺ ᲻ ᲽᲸᲸ 61-;1 Ჺ ᲻ Split memory Using the Memory Separate frequencies for transmit and receive can be registered for each memory channel. ●●Simultaneous registration 1 Select the receive frequency in the VFO mode 2 Press for one second or longer Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ The memory writing screen will be displayed. Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ 3 Press for one second or longer ᲸᲸ Ჺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ The character input screen will be displayed. Ჸ Ჸ᲻  Ჸ Ჸ᲼  Tip Refer to Steps 4 to 11 in “Naming a memory channel” ( 5-+25'. P.66) when assigning a name to a memory channel. $#%- &'. 1 (( 4 Touch [TX IN] Ჸ ᲸᲺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ The number input screen will be displayed. 3 9 ' 4 6 ; 7 + 1 2 %CRU # 5 & ( ) * , - . < : % 8 $ 0 / $#%- ᲹᲺ᲻ @ #$% 5RCEG '06 68

Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40 Using the Memory 5 Enter the transmit frequency Ჸ ᲸᲺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ  The entered frequency will be displayed on the right Ჹ Ჺ ᲻ # side of [T] at the top of the screen. ᲼ Ჽ Ჾ $ $#%- Ჿ ᳀ ᳁ % 5RCEG ᳂  & '06 6 Touch [ENT] Ჸ ᲸᲺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ Ჹ ᲼ Ჽ ᲻ Ჾ Ჸ The display will return to the memory writing screen. Ჹ Ჺ ᲻ # ᲼ Ჽ Ჾ $ Ჿ ᳀ ᳁ % 5RCEG ᳂  & '06 7 Turn to select the memory channel Tip The memory channel can also be selected by touching it directly. 8 Press to save the transmit frequency When the memory writing is completed, the receive frequency will be shown in the display. ●●Registering transmit frequency at a later time 1 Touch [V/M] for 2 to 3 seconds 8(1 The memory list will be displayed. Ჹ ᲼ Ჽ ᲸᲸᲸ Using the Memory ᲽᲸᲸ 61-;1 Ჺ ᲻ ᲼᲻᲻ ᳀ᲾᲸ 8 / 53. / 76' 5%12' 2 Select the memory channel whose transmit Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ frequency is to be registered Ჸ ᲸᲹ Ჹ ᲼ Ჽ Ჸ Ჸ Ჸ 3 Press for one second or longer ᲸᲸ Ჺ Ჹ ᲼ Ჽ Ჹ Ჾ Ჸ The character input screen will be displayed. Ჸ Ჸ᲻  Ჸ Ჸ᲼  Tips • Touch the memory channel or press for a second or 5-+25'. longer to display the character input screen. $#%- &'. 1 (( • Refer to Steps 3 to 12 in “Naming a memory channel” ( P.66) when assigning a name to a memory channel. 69


Document Created: 2015-09-29 09:04:27
Document Modified: 2015-09-29 09:04:27
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC