Test Report

FCC ID: K4ER400BQ

Test Report

Download: PDF
FCCID_4158912

FCC PART 15.249 TEST REPORT For Superior Electronics Corporation No. 10 Lane 31, Chongde St., Sinyi District, Taipei City, 110,Taiwan FCC ID: K4ER400BQ Report Type: Product Name: Original Report Microwave RTE Sensor Report Number: RGMA190104001-00 Report Date: 2019-01-22 Jerry Zhang Reviewed By: EMC Manager Bay Area Compliance Laboratories Corp. (Dongguan) Test Laboratory: No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”.

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 MEASUREMENT UNCERTAINTY ....................................................................................................................................3 TEST FACILITY .............................................................................................................................................................4 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 JUSTIFICATION .............................................................................................................................................................5 EUT EXERCISE SOFTWARE ..........................................................................................................................................5 EQUIPMENT MODIFICATIONS .......................................................................................................................................5 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS ........................................................................................................5 SUPPORT CABLE LIST AND DETAILS ............................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................6 SUMMARY OF TEST RESULTS ...............................................................................................................................7 FCC§15.203 - ANTENNA REQUIREMENT..............................................................................................................8 APPLICABLE STANDARD ..............................................................................................................................................8 ANTENNA CONNECTOR CONSTRUCTION ......................................................................................................................8 FCC §15.207 (A)– AC LINE CONDUCTED EMISSIONS .......................................................................................9 APPLICABLE STANDARD ..............................................................................................................................................9 EUT SETUP ..................................................................................................................................................................9 EMI TEST RECEIVER SETUP .........................................................................................................................................9 TEST PROCEDURE ......................................................................................................................................................10 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................10 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................10 TEST DATA ................................................................................................................................................................11 FCC§15.205, §15.209&§15.249- RADIATED EMISSIONS ....................................................................................13 APPLICABLE STANDARD ............................................................................................................................................13 EUT SETUP ................................................................................................................................................................13 TEST EQUIPMENT SETUP ............................................................................................................................................14 TEST PROCEDURE ......................................................................................................................................................15 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................15 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................16 TEST DATA ................................................................................................................................................................16 FCC §15.215(C) – 20 DB BANDWIDTH TESTING ................................................................................................23 APPLICABLE STANDARD ............................................................................................................................................23 TEST PROCEDURE ......................................................................................................................................................23 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................23 TEST DATA ................................................................................................................................................................23 Page 2 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 GENERAL INFORMATION Product Description for Equipment under Test (EUT) EUT Name: Microwave RTE Sensor EUT Model: SD-R400-BQ Rated Input Voltage: 12-24VDC External Dimension: 80mm(L)*60mm(W)*54mm(H) Serial Number: 190104001 EUT Received Date: 2019.01.08 Objective This type approval report is prepared on behalf of Superior Electronics Corporation in accordance with Part 2-Subpart J, and Part 15-Subparts A and C of the Federal Communication Commissions rules. The tests were performed in order to determine compliance with FCC Rules Part 15, Subpart C, and section 15.203, 15.205, 15.207, 15.209 and 15.249 rules. Related Submittal(s)/Grant(s) N/A. Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. All emissions measurement was performed and Bay Area Compliance Laboratories Corp. (Dongguan). Measurement Uncertainty Parameter Measurement Uncertainty Occupied Channel Bandwidth ±5 % 30M~200MHz: 4.58 dB for Horizontal, 4.59 dB for Vertical Unwanted Emissions, radiated 200M~1GHz: 4.83 dB for Horizontal, 5.85 dB for Vertical 1G~6GHz: 4.45 dB, 6G~26.5GHz: 5.23 dB Temperature ±1℃ Humidity ±5% DC and low frequency voltages ±0.4% Duty Cycle 1% AC Power Lines Conducted 3.12 dB (150 kHz to 30 MHz) Emission Page 3 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Dongguan) to collect test data is located on the No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 897218, the FCC Designation No. : CN1220. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0022. Page 4 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 SYSTEM TEST CONFIGURATION Justification The EUT was configured in operating mode for testing which was provided by the manufacturer. The device operates on frequency: 24150 MHz EUT Exercise Software No software was used in test. Equipment Modifications No modifications were made to the EUT. Local Support Equipment List and Details Manufacturer Description Model Serial Number unknow adapter 2ABB018F / Support Cable List and Details Cable Description Shielding Type Ferrite Core Length(m) From To power cable No No 4 adapter EUT Page 5 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Block Diagram of Test Setup Page 6 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 SUMMARY OF TEST RESULTS FCC Rules Description of Test Result §15.203 Antenna Requirement Compliance §15.207(a) Conduction Emissions Compliance 15.205, §15.209, §15.249 Radiated Emissions Compliance §15.215 (c) 20 dB Bandwidth Compliance Page 7 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 FCC§15.203 - ANTENNA REQUIREMENT Applicable Standard For intentional device, according to §15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used. Antenna Connector Construction The EUT has one internal antenna arrangement, and the antenna gain is 2.15 dBi, fulfill the requirement of this section. Please refer to the EUT photos. Result: Compliant. Page 8 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 FCC §15.207 (a)– AC LINE CONDUCTED EMISSIONS Applicable Standard FCC§15.207(a) EUT Setup The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was with the FCC Part 15.207. The spacing between the peripherals was 10 cm. The adapter was connected to the main LISN with a 120 V/60 Hz AC power source. EMI Test Receiver Setup The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz. During the conducted emission test, the EMI test receiver was set with the following configurations: Frequency Range IF B/W 150 kHz – 30 MHz 9 kHz Page 9 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Test Procedure During the conducted emission test, the adapter was connected to the first LISN. Maximizing procedure was performed on the six (6) highest emissions of the EUT. All data was recorded in the Quasi-peak and average detection mode. Corrected Amplitude & Margin Calculation The basic equation is as follows: VC = VR + AC + VDF Cf = AC + VDF Herein, VC (cord. Reading): corrected voltage amplitude VR: reading voltage amplitude Ac: attenuation caused by cable loss VDF: voltage division factor of AMN Cf: Correction Factor The “Margin” column of the following data tables indicates the degree of compliance within the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Equipment List and Details Calibration Calibration Manufacturer Description Model Serial Number Date Due Date R&S EMI Test Receiver ESCS 30 830245/006 2018-12-10 2019-12-10 Unknown Coaxial Cable C-NJNJ-50 C-0200-01 2018-09-05 2019-09-05 R&S Test Software EMC32 Version8.53.0 N/A N/A R&S Two-line V-network ENV 216 101614 2018-12-10 2019-12-10 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Page 10 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Test Data Environmental Conditions Temperature: 25.8 C Relative Humidity: 54 % ATM Pressure: 100.8 kPa The testing was performed by Lily Xie on 2019-01-15. Test Mode: Transmitting AC120V, 60 Hz, Line: 80 70 Quasi-Peak Limit 60 Average Limit 50 Level in dBμ 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Frequency QuasiPeak Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.162441 37.9 9.000 L1 11.0 27.4 65.3 Compliance 0.288307 43.6 9.000 L1 10.2 17.0 60.6 Compliance 0.558572 20.6 9.000 L1 9.8 35.4 56.0 Compliance 1.476605 16.9 9.000 L1 9.8 39.1 56.0 Compliance 3.491417 21.0 9.000 L1 9.8 35.0 56.0 Compliance 3.934683 25.4 9.000 L1 9.8 30.6 56.0 Compliance Frequency Average Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.243884 25.5 9.000 L1 10.3 26.5 52.0 Compliance 0.292938 32.2 9.000 L1 10.2 18.2 50.4 Compliance 0.468757 15.6 9.000 L1 9.9 30.9 46.5 Compliance 1.190776 13.1 9.000 L1 9.8 32.9 46.0 Compliance 3.575883 11.7 9.000 L1 9.8 34.3 46.0 Compliance 3.934683 13.2 9.000 L1 9.8 32.8 46.0 Compliance Page 11 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 AC120V, 60 Hz, Neutral: 80 70 Quasi-Peak Limit 60 Average Limit 50 Level in dBμ 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Frequency QuasiPeak Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.161152 36.0 9.000 N 11.0 29.4 65.4 Compliance 0.163741 35.3 9.000 N 11.0 29.9 65.2 Compliance 0.167702 37.2 9.000 N 10.9 27.9 65.1 Compliance 0.184529 33.5 9.000 N 10.7 30.8 64.3 Compliance 0.204669 33.3 9.000 N 10.6 30.1 63.4 Compliance 0.290613 42.5 9.000 N 10.2 18.0 60.5 Compliance Frequency Average Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.150000 26.5 9.000 N 11.2 29.5 56.0 Compliance 0.295282 34.3 9.000 N 10.2 16.1 50.4 Compliance 0.450448 15.3 9.000 N 9.9 31.6 46.9 Compliance 0.750100 15.0 9.000 N 9.8 31.0 46.0 Compliance 1.310256 13.4 9.000 N 9.8 32.6 46.0 Compliance 3.903455 13.0 9.000 N 9.8 33.0 46.0 Compliance Page 12 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 FCC§15.205, §15.209&§15.249- RADIATED EMISSIONS Applicable Standard As per FCC§15.249 (a), except as provided in paragraph (b) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Fundamental Field strength of fundamental Field strength of harmonics frequency (millivolts/meter) (microvolts/meter) 902–928 MHz 50 500 2400–2483.5 MHz 50 500 5725–5875 MHz 50 500 24.0–24.25 GHz 250 2500 As per FCC§15.249 (c), Field strength limits are specified at a distance of 3 meters. (d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. EUT Setup Below 1 GHz: Page 13 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Above 1 GHz: The radiated emission tests were performed in the 3 meters chamber, using the setup accordance with the ANSI C63.10-2013. The specification used was the FCC 15.209/15.205 and FCC 15.249 limits. According to C63.10, the above 26.5 GHz test result shall be extrapolated to the specified distance using an extrapolation factor of 20dB/decade from 3m to 1 m Distance extrapolation factor =20 log (specific distance [3m]/test distance [1m]) dB Extrapolation result = Corrected Amplitude (dBμV/m) - distance extrapolation factor (9.54dB) For above 40GHz, external harmonic mixers are utilized. The antenna is scanned around the entire perimeter surface of the EUT, in both horizontal and vertical polarizations, at the distance of 0.5m from the EUT. The Mixers and it`s RF cables is compose a system for calibration, the conversion factor was added into the test Spectrum Analyzer in testing. Test Equipment Setup The system was investigated from 30 MHz to 100 GHz. During the radiated emission test, the EMI test receiver & Spectrum Analyzer Setup were set with the following configurations: Frequency Range RBW Video B/W IF B/W Measurement 30 MHz – 1000 MHz 120 kHz 300 kHz 120 kHz QP 1MHz 3 MHz / PK Above 1 GHz 1MHz 10 Hz / AV If the maximized peak measured value complies with under the QP/Average limit more than 6dB, then it is unnecessary to perform an QP/Average measurement. Page 14 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Test Procedure Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. All data was recorded in the Quasi-peak detection mode from 30 MHz to 1GHz, peak and average detection mode above 1 GHz. Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit –Corrected Amplitude Page 15 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S EMI Test Receiver ESCI 100224 2018-12-10 2019-12-10 Sunol Sciences Antenna JB3 A060611-1 2017-11-10 2020-11-10 HP Amplifier 8447D 2727A05902 2018-09-05 2019-09-05 Unknown Coaxial Cable C-NJNJ-50 C-0400-01 2018-09-05 2019-09-05 Unknown Coaxial Cable C-NJNJ-50 C-0075-01 2018-09-05 2019-09-05 R&S Spectrum Analyzer FSU 26 200256 2019-01-04 2020-01-04 R&S Spectrum Analyzer 8564E 3943A01781 2019-01-04 2020-01-04 TDK RF Horn Antenna HRN-0118 130 084 2018-10-12 2021-10-12 Ducommun 1007726-01 Horn Antenna ARH-4223-02 2016-11-18 2019-11-18 Technolagies 1304 Ducommun 1007726-01 Horn Antenna ARH-2823-02 2016-11-18 2019-11-18 Technolagies 1302 OML Harmonic Mixer WR19/M19HWD U60313-1 2016-10-14 2019-10-14 OML Horn Antenna M19RH 11648-01 2016-10-14 2019-10-14 OML Harmonic Mixer WR12/M12HWD E60120-1 2016-10-19 2019-10-19 OML Horn Antenna M12RH E60120-2 2016-10-19 2019-10-19 OML Harmonic Mixer WR08/M08HWD F60313-1 2016-10-24 2019-10-24 OML Horn Antenna M08RH F60313-2 2016-10-24 2019-10-24 UFA147-1-2362- 64639 231029- MICRO-COAX Coaxial Cable 2018-02-24 2019-02-28 100100 001 Mini Pre-amplifier ZVA-183-S+ 5969001149 2018-09-05 2019-09-05 Quinstar Amplifier QLW-18405536-JO 15964001001 2018-06-27 2019-06-27 Farad Test Software EZ-EMC V1.1.4.2 N/A N/A * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature: 23.4~24.3 oC Relative Humidity: 43~58 % ATM Pressure: 100.3~100.8 kPa The testing was performed by Tyler Pan on 2019-01-15, 2019-01-16. Page 16 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Test Mode: Transmitting 1) 30MHz-1GHz: Horizontal: Receiver Correction Cord. Frequency Limit Margin Reading Detector Factor Amp. (MHz) (dBuV/m) (dB) (dBuV) (dB/m) (dBuV/m) 30.0000 26.29 peak 1.72 28.01 40.00 11.99 116.3300 30.05 peak -5.13 24.92 43.50 18.58 155.1300 31.59 peak -5.87 25.72 43.50 17.78 529.5500 27.99 peak 0.39 28.38 46.00 17.62 581.9300 27.98 peak 1.02 29.00 46.00 17.00 960.2300 12.73 peak 22.90 35.63 54.00 18.37 Page 17 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Vertical: Receiver Correction Cord. Frequency Limit Margin Reading Detector Factor Amp. (MHz) (dBuV/m) (dB) (dBuV) (dB/m) (dBuV/m) 31.9400 29.02 peak 0.19 29.21 40.00 10.79 50.3700 41.06 QP -11.27 29.79 40.00 10.21 155.1300 33.66 peak -5.87 27.79 43.50 15.71 361.7400 32.16 peak -2.80 29.36 46.00 16.64 703.1800 28.35 peak 3.11 31.46 46.00 14.54 954.4100 37.78 peak -3.31 34.47 46.00 11.53 Page 18 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 2) 1GHz-40GHz Receiver Rx Antenna Cable Amplifier Corrected Frequency Limit Margin Reading Polar Factor loss Gain Amplitude (MHz) Detector (dBμV/m) (dB) (dBμV) (H/V) (dB(1/m)) (dB) (dB) (dBμV/m) 24150.00 83.51 PK H 35.41 10.96 37.12 92.76 127.96 35.20 24150.00 78.25 AV H 35.41 10.96 37.12 87.50 107.96 20.46 24150.00 100.50 PK V 35.41 10.96 37.12 109.75 127.96 18.21 24150.00 96.37 AV V 35.41 10.96 37.12 105.62 107.96 2.34 24000.00 42.54 PK V 35.35 10.87 37.40 51.36 74.00 22.64 24000.00 32.35 AV V 35.35 10.87 37.40 41.17 54.00 12.83 24250.00 42.51 PK V 35.45 11.02 36.94 52.04 74.00 21.96 24250.00 32.47 AV V 35.45 11.02 36.94 42.00 54.00 12.00 40GHz-100GHz Receiver Rx Antenna Corrected Extrapolation Frequency Limit Margin Reading Polar Factor Amplitude result (GHz) Detector (dBμV/m) (dB) (dBμV) (H/V) (dB(1/m)) (dBμV/m) (dBμV/m) 48.3* 31.29 PK V 40.08 71.37 61.83 87.96 26.13 48.3* 19.78 AV V 40.08 59.86 50.32 67.96 17.64 72.45* 32.14 PK V 43.85 75.99 66.45 87.96 21.51 72.45* 20.11 AV V 43.85 63.96 54.42 67.96 13.54 96.6* 30.1 PK V 45.92 76.02 66.48 87.96 21.48 96.6* 18.54 AV V 45.92 64.46 54.92 67.96 13.04 Note: for the range 40-100GHz, the test performed at the distance 1.0 m. *: Harmonics frequency. Emissions under the noise floor have not recored. Page 19 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Test plots Horizontal Fundamental Page 20 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Vertical Page 21 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Fundamental Page 22 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 FCC §15.215(c) – 20 dB BANDWIDTH TESTING Applicable Standard Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§ 15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. Test Procedure 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Measure the frequency difference of two frequencies that were attenuated 20 dB from the reference level. Record the frequency difference as the emission bandwidth. 3. Repeat above procedures until all frequencies measured were complete. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S Spectrum Analyzer FSU 26 200256 2019-01-04 2020-01-04 Ducommun 1007726-01 Horn Antenna ARH-4223-02 2016-11-18 2019-11-18 Technolagies 1304 UFA147-1- 64639 231029- MICRO-COAX Coaxial Cable 2018-02-24 2019-02-28 2362-100100 001 QLW- Quinstar Amplifier 15964001001 2018-06-27 2019-06-27 18405536-JO * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature: 23.6 oC Relative Humidity: 35 % ATM Pressure: 100.3 kPa The testing was performed by Tyler Pan on 2019-01-16. Test Result: Compliant. Please refer to following tables and plots Page 23 of 24

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RGMA190104001-00 Test Mode: Transmitting Frequency 20 dB Bandwidth (MHz) (MHz) 24150 8.157 ***** END OF REPORT ***** Page 24 of 24


Document Created: 2019-01-28 13:31:17
Document Modified: 2019-01-28 13:31:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC