Test Report

FCC ID: K4ER100TBQ

Test Report

Download: PDF

FCCID_4130512

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

Revision History
Author/
Revision No. Report Number Issue Date Description
Revised by
1.0 RXZ181204009 RXZ181204009-00 2018.12.21 Original Report Kaylee

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 2 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

TABLE OF CONTENTS
1 General Information ....................................................................................................... 4
1.1 Product Description for Equipment under Test (EUT) ......................................................... 4
1.2 Objective ............................................................................................................................... 5
1.3 Related Submittal(s)/Grant(s)................................................................................................ 5
1.4 Test Methodology.................................................................................................................. 5
1.5 Test Facility ........................................................................................................................... 5
2 System Test Configuration ........................................................................................... 6
2.1 Description of Test Configuration ......................................................................................... 6
2.2 Equipment Modifications ...................................................................................................... 6
2.3 EUT Exercise Software ......................................................................................................... 6
2.4 Support Equipment List and Details...................................................................................... 6
2.5 External Cable List and Details ............................................................................................. 6
2.6 Block Diagram of Test Setup ................................................................................................ 7
3 Summary of Test Results ................................................................................................ 8

4 Test Equipment List and Details ................................................................................... 9

5 FCC §15.203 – Antenna Requirements ..................................................................... 10
5.1 Applicable Standard ............................................................................................................ 10
5.2 Antenna Connected Construction ........................................................................................ 10
6 FCC §15.209, §15.205 , §15.231(b) – Radiated Emissions ......................................... 11
6.1 Applicable Standard ............................................................................................................ 11
6.2 Measurement Uncertainty ................................................................................................... 12
6.3 EUT Setup ........................................................................................................................... 12
6.4 EMI Test Receiver & Spectrum Analyzer Setup................................................................. 13
6.5 Test Procedure ..................................................................................................................... 13
6.6 Corrected Factor & Margin Calculation .............................................................................. 13
6.7 Test Results Summary ......................................................................................................... 13
6.8 Environmental Conditions ................................................................................................... 13
6.9 Test Results ......................................................................................................................... 14
7 FCC §15.231(a)(1) – Deactivation Testing .................................................................. 20
7.1 Applicable Standard ............................................................................................................ 20
7.2 Test Procedure ..................................................................................................................... 20
7.3 Environmental Conditions ................................................................................................... 20
7.4 Test Results ......................................................................................................................... 21
8 FCC §15.231(c) – 20 dB Emission Bandwidth Testing .............................................. 22
8.1 Applicable Standard ............................................................................................................ 22
8.2 Test Procedure ..................................................................................................................... 22
8.3 Environmental Conditions ................................................................................................... 22
8.4 Test Results ......................................................................................................................... 23

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 3 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

1.2 Objective
This report is prepared on behalf of Superior Electronics Corporation All the test measurements were
performed according to the measurement procedure described in ANSI C63.10 - 2013.
The tests were performed in order to determine compliance with FCC Part 15, Subpart C, section
15.203, 15.205, 15.209, 15.35(c) and 15.231 rules.

1.3 Related Submittal(s)/Grant(s)
N/A.

1.4 Test Methodology
All measurements contained in this report were conducted with ANSI C63.10-2013, American
National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices.

1.5 Test Facility
The Test site used by Bay Area Compliance Laboratories Corp. (Taiwan) to collect test data is located
on
70, Lane 169, Sec. 2, Datong Road, Xizhi Dist., New Taipei City 22183, Taiwan, R.O.C.
68-3, Lane 169, Sec. 2, Datong Road, Xizhi Dist., New Taipei City 22183, Taiwan, R.O.C.

Bay Area Compliance Laboratories Corp. (Taiwan) Lab is accredited to ISO 17025 by Taiwan
Accreditation Foundation (TAF code: 3180) and the FCC designation No.TW3180 under the Mutual
Recognition Agreement (MRA) in FCC Test. The facility also complies with the radiated and AC line
conducted test site criteria set forth in ANSI C63.10.

The Federal Communications Commission has the reports on file and is listed under FCC Registration
No.: 974454. The test site has been approved by the FCC for public use and is listed in the FCC Public
Access Link (PAL) database.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 5 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

2 System Test Configuration
2.1 Description of Test Configuration
Channel list:
Frequency
Channel
(MHz)
1 433.92

2.2 Equipment Modifications
No modification was made to the EUT.

2.3 EUT Exercise Software
No test software was used.

2.4 Support Equipment List and Details
Description Manufacturer Model Number BSMI FCC ID S/N

N/A N/A N/A N/A N/A N/A

2.5 External Cable List and Details
Cable Description Length (m) From To

N/A N/A N/A N/A

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 6 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

3 Summary of Test Results
FCC Rules Description of Test Results

§15.203 Antenna Requirement Compliance

§15.207(a) Conducted Emissions Not applicable

§15.205, §15.209, §15.231(b) Radiated Emissions Compliance

§15.231(a)(2) Deactivation Compliance

§15.231(c) Deactivation Compliance

Not applicable: Device only supports battery.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 8 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

4 Test Equipment List and Details
Serial Calibration Calibration
Description Manufacturer Model
Number Date Due Date
Radiated Room (966-A)
SUNOL
Bilog Antenna with A050115/1554
SCIENCES & MINI- JB6/UNAT-6+ 2017/12/20 2018/12/19
6 dB Attenuator 2_01
CIRCUITS
Horn Antenna EMCO 3115 9311-4158 2018/04/20 2019/04/19

Horn Antenna ETS-Lindgren 3116 62638 2018/08/29 2019/08/28

Preamplifier Sonoma 310N 130602 2018/07/04 2019/07/03

Preamplifier EM Electronics Corp. EM01G18G 060657 2018/12/07 2019/12/06

Microware EM Electronics
EM18G40G 060656 2018/01/15 2019/01/14
Preamplifier Corporation
EMI Test Receiver Rohde & Schwarz ESR7 101419 2018/10/23 2019/10/22

Spectrum Analyzer Rohde & Schwarz FSV40 101435 2018/02/12 2019/02/13
FSCM 64639 /
Micro flex Cable UTIFLEX 93D0127 2018/07/31 2019/07/30
(2M)
UFA210A-1- MFR64639
Micro flex Cable UTIFLEX 2018/11/16 2019/11/15
3149-300300 226389-001
K1K50-UP0264-
Micro flex Cable ROSNOL 160309-1 2018/03/05 2019/03/04
K1K50-450CM
K1K50-UP0264-
Micro flex Cable ROSNOL 160309-2 2018/01/17 2019/01/16
K1K50-80CM
Turn Table Champro TT-2000 060772-T N.C.R N.C.R

Antenna Tower Champro AM-BS-4500-B 060772-A N.C.R N.C.R

Controller Champro EM1000 60772 N.C.R N.C.R

Software Farad EZ_EMC BACL-03A1 N.C.R N.C.R

*Statement of Traceability: BACL Corp. attests that all of the calibrations on the equipment items listed above
were traceable to the SI System of Units via the R.O.C. Center for Measurement Standards of the Electronics
Testing Center, Taiwan (ETC) or to another internationally recognized National Metrology Institute (NMI),
and were compliant with the current Taiwan Accreditation Foundation (TAF) requirements

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 9 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

5 FCC §15.203 – Antenna Requirements
5.1 Applicable Standard
An intentional radiator shall be designed to ensure that no antenna other than that furnished by theresponsible
party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique
coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section.

5.2 Antenna Connected Construction
The EUT has a PCB antenna which was permanently attached and the antenna gain is 0dBi; fulfill the requirement
of this section. Please refer to EUT photos.

Result: Compliant.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 10 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

6 FCC §15.209, §15.205 , §15.231(b) – Radiated Emissions
6.1 Applicable Standard
FCC §15.205, §15.209, §15.231 (b)
According to FCC §15.231(b), the field strength of emissions from intentional radiators operated under
this section shall not exceed the following:
Fundamental frequency Field strength of fundamental Field strength of spurious
(MHz) (microvolts/meter) emission (microvolts/meter)
40.66 – 40.70 2250 225
70 – 130 1250 125
130 – 174 1250 to 3750 ** 125 to 375 **
174 – 260 3750 375
160 – 470 3750 to 12500 ** 375 to 1250 **
Above 470 12500 1250
(1) The above field strength limits are specified at a distance of 3 meters. The tighter limits apply at the band
edges.
(2) Intentional radiators operating under the provisions of this section shall demonstrate compliance with the
limits on the field strength of emissions, as shown in the above table, based on the average value of the measured
emissions. As an alternative, compliance with the limits in the above table may be based on the use of
measurement instrumentation with a CISPR quasi-peak detector. The specific method of measurement employed
shall be specified in the application for equipment authorization. If average emission measurements are employed,
the provisions in §15.35 for averaging pulsed emissions and for limiting peak emissions apply. Further,
compliance with the provisions of §15.205 shall be demonstrated using the measurement instrumentation
specified in that section.
(3) The limits on the field strength of the spurious emissions in the above table are based on the fundamental
frequency of the intentional radiator. Spurious emissions shall be attenuated to the average (or, alternatively,
CISPR quasi-peak) limits shown in this table or to the general limits shown in §15.209, whichever limit permits
a higher field strength.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 11 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

6.4 EMI Test Receiver & Spectrum Analyzer Setup
The system was investigated from 30 MHz to 4 GHz. During the radiated emission test, the EMI test receiver
was set with the following configurations measurement method 6.3 in ANSI C63.10.

Frequency Range RBW VBW Detector
30-1000 MHz 100 kHz 300 kHz PK
Above 1 GHz 1 MHz 3 MHz PK

6.5 Test Procedure
Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all
installation combinations.

6.6 Corrected Factor & Margin Calculation
The Correct Factor is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier
Gain from the Meter Reading. The basic equation is as follows:

Correct Factor = Antenna Factor + Cable Loss – Amplifier Gain

The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit.
For example, a margin of -7 dB means the emission is 7 dB below the limit. The equation for margin
calculation is as follows:

Margin = Result – Limit

6.7 Test Results Summary
According to the data in the following table, the EUT complied with the FCC §15.209 Limit.

6.8 Environmental Conditions
Temperature: 25 ℃

Relative Humidity: 55 %
ATM Pressure: 1010 hPa
The testing was performed by Tom Hsu on 2018-12-16 ~ 2018-12-17.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 13 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

Below 1GHz
Horizontal
Frequency Reading Correct Result Limit Margin Height Degree Remark
(MHz) (dBμV) Factor(dB/m) (dBμV/m) (dBμV/m) (dB) (cm) (°)
124.09 26.69 -9.21 17.48 43.5 -26.02 100 234 QP
200.72 24.41 -8.92 15.49 80.83 -65.34 100 115 QP
*433.92 85.83 -5.40 80.43 100.83 -20.4 242 11 Peak
*433.92 80.43 -8.04 72.39 80.83 -8.44 242 11 Ave
578.05 28.02 -3.7 24.32 80.83 -56.51 100 227 QP
650.8 39.31 -2.84 36.47 80.83 -44.36 100 172 QP
759.44 37.02 -1.51 35.51 80.83 -45.32 100 360 QP
867.84 51.64 0.34 51.98 80.83 -28.85 100 7 Peak
867.84 51.98 -8.04 43.94 60.83 -16.89 100 7 Ave

Vertical
Frequency Reading Correct Result Limit Margin Height Degree Remark
(MHz) (dBμV) Factor(dB/m) (dBμV/m) (dBμV/m) (dB) (cm) (°)
141.55 26.44 -9.51 16.93 80.83 -63.9 100 311 QP
201.69 24.21 -9.15 15.06 80.83 -65.77 100 311 QP
353.01 24.28 -6.8 17.48 80.83 -63.35 100 96 QP
*433.92 79.95 -5.40 74.55 100.83 -26.28 233 264 Peak
*433.92 74.55 -8.04 66.51 80.83 -14.32 233 264 Ave
650.8 40.11 -2.84 37.27 80.83 -43.56 100 262 QP
759.44 29.82 -1.51 28.31 80.83 -52.52 100 306 QP
867.84 38.36 0.34 38.7 80.83 -42.13 100 223 Peak
867.84 38.7 -8.04 30.66 60.83 -30.17 100 223 Ave

Note 1:
Corrected Factor (dB/m) = Antenna factor (RX) (dB/m) + Cable Loss (dB) – Amplifier Factor (dB)
Margin (dB) = Result (dBμV /m) – Limit (dBμV/m)
Note 2:
Calculate Average value based on Duty Cycle correction factor:
Tp = 52.403ms
Ton = Burst1*N1 + Burst2*N2 = 0.671*21 + 0.333*20 = 14.091 + 6.66 = 20.751ms
Duty Cycle Corrected Factor = 20*log(Ton/Tp) = 20*log(20.751ms/52.403ms) = -8.04dB
Average value = Peak value + Duty Cycle Corrected Factor

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 16 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

Above 1GHz
Horizontal
Frequency Reading Correct Result Limit Margin Height Degree Remark
(MHz) (dBμV) Factor(dB/m) (dBμV/m) (dBμV/m) (dB) (cm) (°)
1301.760 71.92 -8.18 63.74 80.83 -17.09 219 61 peak
1301.760 63.74 -8.04 55.70 60.83 -5.13 219 61 AVG
1735.680 56.72 -6.20 50.52 80.83 -30.31 146 82 peak
1735.680 50.52 -8.04 42.48 60.83 -18.35 146 82 AVG
2169.600 51.99 -4.44 47.55 80.83 -33.28 112 199 peak
2169.600 47.55 -8.04 39.51 60.83 -21.32 112 199 AVG
2603.520 64.26 -3.29 60.97 80.83 -19.86 139 16 peak
2603.520 60.97 -8.04 52.93 60.83 -7.90 139 16 AVG

Vertical
Frequency Reading Correct Result Limit Margin Height Degree Remark
(MHz) (dBμV) Factor(dB/m) (dBμV/m) (dBμV/m) (dB) (cm) (°)
1301.760 67.94 -8.18 59.76 80.83 -21.07 214 140 peak
1301.760 59.76 -8.04 51.72 60.83 -9.11 214 140 AVG
1735.680 59.81 -6.20 53.61 80.83 -27.12 215 346 peak
1735.680 53.61 -8.04 45.57 60.83 -15.26 215 346 AVG
2169.600 48.89 -4.44 44.45 80.83 -36.38 100 90 peak
2169.600 44.45 -8.04 36.41 60.83 -24.42 100 90 AVG
2603.520 50.26 -3.29 46.97 80.83 -33.86 100 20 peak
2603.520 46.97 -8.04 38.93 60.83 -21.90 100 20 AVG

Note 1:
Corrected Factor (dB/m) = Antenna factor (RX) (dB/m) + Cable Loss (dB) – Amplifier Factor (dB)
Margin (dB) = Result (dBμV /m) – Limit (dBμV/m)
Note 2:
Calculate Average value based on Duty Cycle correction factor:
Tp = 52.403ms
Ton = Burst1*N1 + Burst2*N2 = 0.671*21 + 0.333*20 = 14.091 + 6.66 = 20.751ms
Duty Cycle Corrected Factor = 20*log(Ton/Tp) = 20*log(20.751ms/52.403ms) = -8.04dB
Average value = Peak value + Duty Cycle Corrected Factor

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 17 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

Duty Cycle
Tp=52.403ms
RBW 100 kHz Delta 2 [T1 ]
*VBW 300 kHz 0.59 dB
Ref 0 dBm *Att 10 dB SWT 300 ms 52.403846 ms
0 Marker 1 [T1 ]
-28.89 dBm
-10
107.211538 ms A
Delta 1 [T1 ] SGL
1 PK * 0.38 dB
CLRWR 41.346154 ms
-20

1 1 2
-30

-40

-50

3DB
-60

-70

-80

-90

-100
Center 433.92 MHz 30 ms/

Date: 16.DEC.2018 16:32:57

Zoom in
N1=21, N2=20
RBW 100 kHz Delta 1 [T1 ]
*VBW 300 kHz 0.39 dB
Ref 0 dBm *Att 10 dB SWT 50 ms 40.865385 ms
0 Marker 1 [T1 ]
-33.51 dBm
-10
2.804487 ms A
SGL
1 PK *
CLRWR
-20

-30 1 1

-40

-50

3DB
-60

-70

-80

-90

-100
Center 433.92 MHz 5 ms/

Date: 16.DEC.2018 16:34:06

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 18 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

7 FCC §15.231(a)(1) – Deactivation Testing
7.1 Applicable Standard
Per FCC §15.231(a) (1), A manually operated transmitter shall employ a switch that will automatically deactivate
the transmitter within not more than 5 seconds of being released

7.2 Test Procedure
1. With the EUT’s antenna attached, the waveform was received by the test antenna which was connected to
the spectrum analyzer.
2. Set center frequency of spectrum analyzer=operating frequency.
3. Set the spectrum analyzer as RBW=100k VBW=300k Span=0Hz.
4. Repeat above procedures until all frequency measured was complete.

7.3 Environmental Conditions
Temperature: 25 ℃

Relative Humidity: 55 %
ATM Pressure: 1010 hPa
The testing was performed by Tom Hsu on 2018-12-16.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 20 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

7.4 Test Results
Test mode: Transmitting

GFSK Modulation

5s
RBW 100 kHz Delta 1 [T1 ]
*VBW 300 kHz -55.76 dB
Ref 0 dBm *Att 10 dB SWT 10 s 5.000000 s
0 Marker 1 [T1 ]
-22.08 dBm
-10 1.282051 s A
SGL
1 PK *
CLRWR 1
-20

-30

-40

-50

3DB
-60

-70
1

-80

-90

-100
Center 433.92 MHz 1 s/

Date: 16.DEC.2018 16:50:55

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 21 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

8 FCC §15.231(c) – 20 dB Emission Bandwidth Testing
8.1 Applicable Standard
Per 15.231(c), The bandwidth of the emission shall be no wider than 0.25% of the center frequency for devices
operating above 70 MHz and below 900 MHz. Bandwidth is determined at the points 20 dB down from the
modulated carrier.

8.2 Test Procedure
With the EUT’s antenna attached, the waveform was received by the test antenna which was connected to the
spectrum analyzer, plot the 20 dB bandwidth.

8.3 Environmental Conditions
Temperature: 25 ℃

Relative Humidity: 55 %
ATM Pressure: 1010 hPa
The testing was performed by Tom Hsu on 2018-12-16.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 22 of 23

Bay Area Compliance Laboratories Corp.(Taiwan) No.: RXZ181204009-00

8.4 Test Results
20 dB Emission
Frequency Limit
Bandwidth Result
(MHz) (kHz)
(kHz)
433.92 48.718 1085 Compliance
Note: Limit = 0.25% * Center Frequency = 0.25% * 433.92 MHz = 1085 kHz

20 dB Emission Bandwidth
*RBW 10 kHz Marker 1 [T1 ]
*VBW 30 kHz -28.09 dBm
Ref 0 dBm *Att 10 dB SWT 10 ms 433.977692308 MHz
0 ndB [T1] 20.00 dB
BW 48.717948718 kHz
-10 Temp 1 [T1 ndB] A
-48.14 dBm
1 PK 433.954294872 MHz
MAXH Temp 2 [T1 ndB]
-20
-48.18 dBm
1
434.003012821 MHz
-30

-40
T1 T2
-50

3DB
-60

-70

-80

-90

-100
Center 433.92 MHz 20 kHz/ Span 200 kHz

Date: 16.DEC.2018 16:45:02

***** END OF REPORT *****

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or
used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 23 of 23

Document Created: 2019-03-23 19:21:56
Document Modified: 2019-03-23 19:21:56

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC