SAR Exclusion Letter

FCC ID: K44479100

RF Exposure Info

Download: PDF
FCCID_3895796

H_CT 74, Seoicheon—ro 578beon—gil, Majang—myeon, Icheon—si, Gyeonggi—do, Korea TEL: +82—31—645—6300 FAX: +82—31—645—6401 HCTCO,,LTD. Applicant Name: Date of Issue: 06.12, 2018 JVC KENWOOD CORPORATION Test Report No.: HCT—SR—1806—F1002 1—16—2 Hakusan Midori—ku Yokohama—shi Kanagawa 226— Test Site: HCT CO., LTD. 8525 Japan FCC ID: K44479100 ISED ID: 282F—479100 FCC Model: NX—3320—K, NX—3320—K2, NX—3320—K3, NX—3300—K, NX—3300—K2, NX—3300—K3 ISED Model NX—3320—K, NX—3320—K2, NX—3320—K3, NX—3300—K, NX—3300—K2, NX—3300—K3 Equipment Type: UHF DIGITAL TRANSCEIVER FCC Rule Part(s): 47CFR §2.1093 ISED Rule Part(s): RSS—102 Issue 5; Health Canada Safety Code 6 Application Type Certification Device Wireless specification overview Band & Mode Operating Mode Tx Frequency Maximum Output Power : 2.5 mW This device has been excluded from SAR measurements based on FCC FDB KDB 447498 DO1 vO6 and ISED RSS102 Issue 5.. Reviewed By Yun—jeang, Heo Technical Manager / SAR Team Certification Division This report only responds to the tested sample and may not be reproduced, except in full, without written approval of the HCT Co., Ltd. F—TP22—03 (Rev.00) HCT CO., LTD.

1. SAR Test Exclusions Applied _Bluetooth 4.0 LE For FCC According to the FCC KDB 447498 D01 v06 section 4.3.1, for 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: : ∗ πΉπ‘Ÿπ‘’π‘žπ‘’π‘’π‘›π‘π‘¦ 𝐺𝐻𝑧 3.0 for 1 g SAR where - f(GHz) is the RF channel transmit frequency in GHz - Power and distance are rounded to the nearest mW and mm before calculation - The result is rounded to one decimal place for comparison Calculation Result: Tx frequency range: 2 402 MHz~ 2 480 MHz Min. test separation distance: 5 mm Maximum Output Power: 2.5mW The Highest RF channel frequency: 2 480 MHz Frequency Maximum Allowed Power Separation Distance Mode ≤ 3.0 for 1g SAR [MHz] [mW] [mm] Bluetooth 2 480 3 5 0.9 Based on the maximum output power of Bluetooth 4.0 LE and antenna to use separation distance, Bluetooth 4.0 LE SAR was not required [(3/5)*√2.480] = 0.9 < 3.0. Note: Held-to ear configurations are not applicable to Bluetooth operations and therefore were not considered for simultaneous transmission. The Estimated SAR results were determined according to FCC KDB447498 D01v06 2. SAR Test Exclusions Applied _Bluetooth 4.0 LE For ISED Per RSS102 Issue 5, 2.5.1 Exemption Limits for Routine Evaluation . The SAR exemption from RSS102: Issue 5 was also exempted by the above exclusion conditions.


Document Created: 2018-06-14 13:55:55
Document Modified: 2018-06-14 13:55:55
Β© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC