FCC Justification Letter

FCC ID: K44378702

Cover Letter(s)

Download: PDF
FCCID_922884

Feb. 10th, 2008 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer Subject: Justify Extended Frequency Range for MODEL: NX-800H-K, TK-5820-K, FCC ID: K44378702. To Whom It May Concern: This letter serves justification for extended frequencies This device has design capability to operate in the frequency band 450 to 520 MHz and complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transit frequencies using the normally accessible external controls. Please note that Licensed End Users do not have access to any external controls that will allow them to program the equipment. Equipment programming is the responsibility of Kenwood approved Service Agents. The table below has been collated using information from CFR Part 2.106 and lists the Frequency Ranges and Rule Parts, which permit the operation of this equipment inside the United States of America. Part Part Part Part Freq. Range (MHz) 90 22 74 95A 450.0000-454.0000 x x 454.0000-455.0000 x 455.0000-456.0000 x 456.0000-460.0000 x x 460.0000-462.5375 x 462.5375-462.7375 x 462.7375-467.5375 x 467.5375-467.7375 x 467.7375-470.0000 x 470.0000-512.0000 x x x 512.0000-520.0000 x Table 1 – Frequency Range and Rule Parts - (47 CFR Part 2.106) It is understood that a grant note code may be added to the grant which indicates this required operation. Please contact me if you require any additional information. Sincerely, Tamaki Shimamura Communications Equipment Division Kenwood Corporation 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan


Document Created: 2007-12-19 17:05:35
Document Modified: 2007-12-19 17:05:35
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC