SAR attachment B

FCC ID: JVPC71A

RF Exposure Info

Download: PDF
FCCID_624548

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Federal Ofice of Metrology and Accreditation Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration cortificates Client CCS (Auden) Certificate No: D1900V2—50056_Dec04 |CALIBRATION CERTIFICATE I Object D1900V2 — SN: 54056 Calibration procedure(s) QA CAL—05.v6 Calibration procedure for dipole validation kits Calibration date: December 9, 2004 Condition of the calibrated item In Tolerance This calibration certficate documents the traceabiity to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probabiity are given on the following pages and are part of the certificate. All callbrations have been conducted in the closed laboratory facilty: environment temperature (22 3)°C and humidity < 70%. Calibration Equipment used (M&TE criical for calibration) Primary Standards in# Cal Date (Calibrated by. Certificate No.) Scheduled Calibration Power meter EPM E442 GBarasoro« 12—0ct—04 (METAS, No. 251—00412) Oct05 Power sensor HP 8481A ussr202ree 12—0ct—04 (METAS, No. 251—00412) Octos Reference 20 dB Attonuator N: 5086 (209) 10—Aug—04 (METAS, No 251—00402) Aug—05 Reference 10 dB Attenuator N: 5047.2 (10) 10—Aug—04 (METAS, No 251—00402) Aug—05 Reference Probe ET3DV6 SN 1507 26—0ct—04 (SPEAG, No. ET3—1507_Oct04) Oct—05 pase sn eo1 22Jul—04 (GPEAG, No. DAE4—601_Jul04) Jul—0s Secondary Standards in# Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—0ct—02 (GPEAG, in nouse check Oct—03) In house check: Oct—05 RF generator R&S SML—03 100698 27—Mar—02 (GPEAG, in house check Dec—03) in house check: Dec—05 Network Analyzer HP 8753E US37390585 84206 18—0ct—01 (SPEAG,in house check Now—04) In house checic Nov 05 Name Function Signature Calibrated by: Mike Mei Laboratory Technician ‘N W,DI'\ \ & A Approved by: Katja Pokovic Technical Manager /Z & /(_/é Issued: December 9, 2004 This calibration certficate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D1900V2—5d056_Dec04 Page 1 of 9

Calibration Laboratory of SchweizerischerKalibrierdienst Schmid & Partner Service suisso d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Federal Offce of Metrology and Accreditation Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration cortificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) CENELEC EN 50361, "Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz — 3 GHz), July 2001 c) Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions‘", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned underthe liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connectorto the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. * SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. + SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: D1900V2—5d056_Dec04 Page 2 of 9

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY4 V4.4 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V4.9 Distance Dipole Center — TSL 10 mm with Spacer Area Scan resolution dx, dy = 15 mm Zoom Scan Resolution dx, dy, dz =5 mm Frequency 1900 MHz & 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 40.0 1.40 mho/m Measured Head TSL parameters (22.0 £0.2) °C 38.9 16 % 1.45 mho/m 2 6 % Head TSL temperature during test (22.0 £0.2) °C — — SAR result with Head TSL SAR averaged over 1 em‘ (1 g) of Head TSL condition SAR measured 250 mW input power 9.71 mW /g SAR normalized normalized to 1W 38.8 mW /g SAR for nominal Head TSL parameters ‘ normalized to 1W 37.6 mW / g £ 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 5.09 mW /g SAR normalized normalized to 1W 20.4 mW / g SAR for nominal Head TSL parameters ‘ normalized to 1W 19.7 mW / g 2 16.5 % (k=2) " Correction to nominal TSL parameters according to d), chapter"SAR Sensitivities" Certificate No: D1900V2—50056_Dec04 Page 3 of 9

Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 53.3 1.52 mhoim Measured Body TSL parameters (22.0 £0.2) °C 51.6 16 % 1.58 mho/m + 6 % Body TSL temperature during test (21.5£0.2) °C — — SAR result with Body TSL SAR averaged over 1 cm (1 g) of Body TSL condition SAR measured 250 mW input power 10.1 mW /g SAR normalized normalized to 1W 40.4 mW /g SAR for nominal Body TSL parameters * normalized to 1W 38.7 mW / g £ 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL Condition SAR measured 250 mW input power 5.37 mW /g SAR normalized normalized to 1W 21.5 mW /g SAR for nominal Body TSL parameters ‘ normalized to 1W 20.6 mW / g * 16.5 % (k=2) * Correction to nominal TSL parameters according to d), chapter"SAR Sensitivities" Crtificate No: D1900V2—5d056_Dec04 Page 4 of 9

Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 53.0 0 + 5.2 jQ Return Loss —24.7 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 49.9 Q + 6.9 j0 Return Loss —23.2 0B General Antenna Parameters and Design Electrical Delay (one direction) 1.205 ns After long term use with 100W radiated power, only a slight warmingof the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessiveforce must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on March 19, 2004 Certificate No: D1900V2—50056_Dec04 Page 5 of 9

DASY4 Validation Report for Head TSL Date/Time: 12/08/04 11:55:04 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN5d056 Communication System: CW—1900; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: HSL 1800 MHz; Medium parameters used: {= 1900 MHz; 6 = 1.45 mho/m; s; = 38.9; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY4 (High Precision Assessment) DASY4 Configuration: * Probe: ET3DV6 — SN1507; ConvBF(4.96, 4.96, 4.96); Calibrated: 26.10.2004 Sensor—Surface: 4mm (Mechanical Surface Detection) Cc Electronics: DAE4 Sn601; Calibrated: 22.07.2004 Phantom: Flat Phantom half size; Type: QDO0OP49AA; Serial: SN:1001; Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 Pin = 250 mW; d = 10 mm/Area Scan (81x81x1); Measurement grid: dx=15mm, dy=1 5mm Maximum value of SAR (interpolated) = 11.2 mW/g Pin = 250 mW; d = 10 mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=Smm, dz=5mm Reference Value = 90.1 V/m; Power Drift= 0.01 dB Peak SAR (extrapolated) = 16.9 W/kg SAR(I g) = 9.71 mW/g; SAR(10 g) = 5.09 mWi/g Maximum value of SAR (measured)=11 mW/g dB 0 dB =11 mWi/s Certificate No: D1900V2—50056_Dec04 Page 6 of 9

Impedance Measurement Plot for Head TSL 8 Dec 2004 10:33:28 sit 4 U FS 1: 53.098 a 4445 n 430.94 pH 1 $00.000 800 IMHz cH2 sit Los_5 da/Rer —20 8 _____ —24.725db_ 1 900.000008 Kz Cor ty §E e mmnd staRt 1 ro0.000000 miz STce 2 100.000 000 Miz Certificate No: D1900V2—50056_Dec04 Page 7 of 9

DASY4 Validation Report for Body TSL Date/Time: 12/09/04 16:10:11 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN54056 Communication System: CW—1900; Frequency: 1900 MHz;Duty Cycle:1:1 Medium: Muscle 1800 MHz; Medium parameters used: £= 1900 MHz; 0 = 1.58 mho/m; s;= 51.6; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY4 (High Precision Assessment) DASY4 Configuration: Probe: ET3DV6 — SN1507; ConvF(4.43, 4.43, 4.43); Calibrated: 26.10.2004 Sensor—Surface: 4mm (Mechanical Surface Detection) Electronics: DAE4 $n601; Calibrated: 22.07.2004 Phantom: Flat Phantom quarter size —SN:1001; Type: QDO0OP50AA; Serial: SN:1001; Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, VI.8 Build 130 Pin = 250 mW; d = 10 mm/Area Scan (81x81x1): Measurement grid: dx=1 5mm, dy=1 5mm Maximum value of SAR (interpolated) = 11.6 mW/g Pin = 250 mW; d = 10 mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=>mm Reference Value = 91.9 V/m; Power Drift =—0.0 dB Peak SAR (extrapolated) = 17 W/kg SAR(I g) = 10.1 mW/g; SAR(10 g) = 5.37 mWi/g Maximum value of SAR (measured) = 11.5 mW/g dB 0 ~40 0 dB =11.5 mWi/g Certificate No: D1900V2—50056_Dec04 Page 8 of 9

Impedance Measurement Plot for Body TSL 9 Dec 2004 11:30:31 CB] si 1 U FS 4149.996 0 6.9020e 57818 pH 1 $00.008 800 tHz B i6* cu2 si1 Los s de/res —20_as M 11—23.292 as __1 900.000 200 MHz ty 158 — Certificate No: D1900V2—54056_Dec04 Page 9 of 9


Document Created: 2005-08-03 13:39:40
Document Modified: 2005-08-03 13:39:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC