SAR System Validation

FCC ID: JUPTRIMTRACE

RF Exposure Info

Download: PDF
FCCID_833384

Date/Time: 6/21/2007 5:34:43 PM Test Laboratory: Compliance Certification Services System Performance Check @ 900MHz DUT: Dipole 900 MHz; Type: D900V2;Serial: D900V2 - SN:108 Communication System: CW;Frequency: 900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 900 MHz; σ = 1.05 mho/m; εr = 54.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room AmbientTemperature: 22.0deg. C; Liquid Temperature: 21.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and witha peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3554; ConvF(7.58, 7.58, 7.58); Calibrated: 4/24/2007 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 11/16/2006 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 d=15mm, Pin=250mW/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.99 mW/g d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 53.7 V/m; Power Drift = -0.117 dB Peak SAR (extrapolated) = 4.10 W/kg SAR(1 g) = 2.78 mW/g; SAR(10 g) = 1.81 mW/g Maximum value of SAR (measured) = 3.00 mW/g 0 dB = 3.00mW/g

Date/Time: 6/21/2007 5:47:14 PM Test Laboratory: Compliance Certification Services System Performance Check @ 900MHz DUT: Dipole 900 MHz; Type: D900V2; Serial: D900V2 - SN:108 Communication System: CW; Frequency: 900 MHz;Duty Cycle: 1:1 d=15mm, Pin=250mW/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Maximum value of SAR (measured) = 2.99 mW/g

Date/Time: 6/22/2007 12:09:27 AM Test Laboratory: Compliance Certification Services System Performance Check @ 1900MHz DUT: Dipole 1900 MHz; Type: D1900V2;Serial: D1900V2 - SN:5d043 Communication System: CW;Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.47 mho/m; εr = 53.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room AmbientTemperature: 22.0deg. C; Liquid Temperature: 21.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and witha peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3554; ConvF(6.61, 6.61, 6.61); Calibrated: 4/24/2007 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 11/16/2006 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 53; Postprocessing SW: SEMCAD, V1.8 Build 172 d=10mm; Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 11.6 mW/g d=10mm; Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 88.6 V/m; Power Drift = 0.064 dB Peak SAR (extrapolated) = 18.5 W/kg SAR(1 g) = 10.3 mW/g; SAR(10 g) = 5.4 mW/g Maximum value of SAR (measured) = 11.5 mW/g 0 dB = 11.5mW/g

Date/Time: 6/22/2007 12:20:14 AM Test Laboratory: Compliance Certification Services System Performance Check @ 1900MHz DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:5d043 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 d=10mm; Pin=250mW/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Maximum value of SAR (measured) = 11.6 mW/g


Document Created: 2007-06-22 01:50:38
Document Modified: 2007-06-22 01:50:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC