antenna details

FCC ID: JUP613

Operational Description

Download: PDF
FCCID_733455


Product Specification Mica 2.4 GHz SMD Antenna Product Specification

Mica 2.4 GHz SMD Antenna TABLE OF CONTENT 1. Features ......................................................................................................................................................................... 2 2. Description .....................................................................................................................................................................2 3. Application ...................................................................................................................................................................... 2 4. Model name ....................................................................................................................................................................3 5. General data ................................................................................................................................................................... 3 6. Electrical characteristics ................................................................................................................................................. 3 7. Electrical performance .................................................................................................................................................... 4 7.1 Voltage Standing Wave Ratio ............................................................................................................................... 4 7.2 3D-Radiation ........................................................................................................................................................4 7.3 Radiation patterns ................................................................................................................................................4 8. Antenna Dimensions ....................................................................................................................................................... 5 9. Antenna Foot print .......................................................................................................................................................... 5 10. Electrical interface ........................................................................................................................................................6 10.1 Transmission line and matching ......................................................................................................................... 6 10.2 Test board dimensions .......................................................................................................................................6 10.3 Test board matching ........................................................................................................................................... 6 11. Soldering .......................................................................................................................................................................6 11.1 Recommended soldering conditions .....................................................................................................................6 11.2 Leadfree soldering ................................................................................................................................................6 12. Reliability ...................................................................................................................................................................... 7 12.1 Temperature and Humidity .................................................................................................................................7 12.2 Mechanical .........................................................................................................................................................7 12.3 Miscellaneous .................................................................................................................................................... 7 12.4 Judgement standard ..........................................................................................................................................7 13. Hazardous Material Reguration Conformance ..............................................................................................................7 14. Application example ......................................................................................................................................................8 15. Packaging .....................................................................................................................................................................9 15.1 Shelf storage recommendation ..........................................................................................................................9 15.2 Tape characteristics ........................................................................................................................................... 9 15.3 Reel dimension ..................................................................................................................................................9 15.4 Box dimension ...................................................................................................................................................9 15.5 Bag properties ...................................................................................................................................................9 15.6 Reel label information ........................................................................................................................................ 9 16. Contact information .................................................................................................................................................... 10 1. FEATURES - Designed for 2.4 GHz applications [BluetoothTM, WiFiTM (802.11b/g), ZigbeeTM, WiMediaTM etc.] - Intended for SMD mounting - Supplied in tape on reel 2. DESCRIPTION The Mica antenna is intended for use with all 2.4 GHz applications. The antenna requires a groundplane, i.e your device acts as an active part of the antenna and thus demand careful consideration concerning its placement 3. APPLICATION - Mobile phones - PDAs - Headsets - Laptops - Medical equipment - Automotive 2 (10) Rev : FE010315-G / April 18 2005

Mica 2.4 GHz SMD Antenna 4.MODEL NAME 30 30 A5645 - 01 Drawing No. Technology -PCB Antenna Family -SMD 5. GENERAL DATA Product Name Mica 2.4 GHz Article No. 3030A5645-01 Frequency 2.4-2.5 GHz Polarization Linear Operating temperature -40 to + 85 degC Impedance 50 Ohm Weight 0.4 gram Antenna type SMD 6. ELECTRICAL CHARACTERISTICS Characteristics Conditions* Min Typ Max Peak Gain 0.8 dBi 1.2 dBi 1.9 dBi Frequency 2.4-2.5 GHz, Measured in 3D chamber ( near field) Efficiency 70% 75% 79% VSWR 1.0:1 1.5:1 1.9:1 Frequency 2.4-2.5 GHz, Measured in Network Analyzer *Note all data provided in this table are based on the gigaAnt reference board 3 (10) Rev : FE010315-G / April 18 2005

Mica 2.4 GHz SMD Antenna 7. ELECTRICAL PERFORMANCE 7.1 Voltage Standing Wave Ratio 7.2 3D-Radiation 2.74 VSWR -2.27 * HP9770 Network Analyzer 3:1 25 20 15 -7.28 10 5 2:1 0 Z -12.3 -5 -10 -15 -17.31 1:1 -20 2.4 2.45 2.5 GHz 20 10 --22.33 20 0 10 -10 0 Y -20 -10 X -27.34 -20 -30 dBi 7.3 Radiation patterns XY- Plane XZ- Plane YZ- Plane Total polarization Vertical polarization Horizontal polarization 4 (10) Rev : FE010315-G / April 18 2005

Mica 2.4 GHz SMD Antenna 8. ANTENNA DIMENSIONS L W H G F S 1, S 2 I J K L M N Length Width Height Ground F eed Solder F eed F eed 20.5 ±0.2 3.6 ±0.1 3.3±0.2 1.2±0.1 1.2±0.1 1.2±0.1 3.2±0.1 0.55±0.25 1.0±0.1 5.5±0.1 7.7±0.1 0.2±0.1 Dimensions in millimeter 9. ANTENNA FOOT PRINT K L S1 M S2 G F O P I Copper area Soldering pads Transparent area G F S1 S2 I K L M O P Ground F eed Solder Solder 1.2±0.1 1.2±0.1 1.2±0.1 1.2±0.1 3.2±0.1 1.0±0.1 5.5±0.1 7.7±0.1 0.5±0.1 0.5±0.1 Dimensions in millimeters 5 (10) Rev : FE010315-G / April 18 2005

Mica 2.4 GHz SMD Antenna 10. ELECTRICAL INTERFACE 10.1 Transmission line and matching t, w = Unique dimensioning according to your PCB * The matching network has to be individually C = Inductor and capacitor values according to your designed using one, two or three components. specific device* * gigaAnt provides this service upon request 10.2 Test board dimensions 10.3 Test board matching Series resistor 0 Ohm The testboard is designed for evaluation purposes for The testboard is matched with above specified Mica 2.4 GHz SMD antenna. The board has the same component. Note! The component value(s) will vary size as a typical PCMCIA card and is fitted with an depending on size of PCB, surrounding components etc. SMA connector. 11. SOLDERING 11.1 Recommended soldering conditions 11.2 Leadfree soldering The antenna has been tested and approved for leadfree soldering. The reflow curve and solder paste used is listed below. Solder paste: KOKI S3X58-M405 6 (10) Rev : FE010315-G / April 18 2005

Mica 2.4 GHz SMD Antenna 12. RELIABILITY 12.1 Temperature and Humidity Item Standard Low High Duration Operating temperature EN/IEC 60068-2-2, Test Bd: Dry heat -30 degC +90 degC - Temperature cycling EN/IEC 60068-2-14, Test Na: Change of temperature -40 degC +90 degC 500 cycles / 10 min Storage life EN/IEC 60068-2-1, Test Ca: Damp heat +60 degC / 90% RH 500 h Humidity Storage life EN/IEC 60068-2-1, Test Ad: Cold -55 degC - 500 h Low temperature Storage life EN/IEC 60068-2-2, Test Bb: Dry heat - +125 degC 500 h High temperature 12.2 Mechanical Item Standard Low High Duration Bending 1 mm at a rate of 1 mm/s Bending IEC 60068-2-21, Test Ue1: Bending with support at end of PCB 1mm depth on reference board Force of 5 N applied to the side of Shear IEC 60068-2-21, Test Ue3: Shear the antenna. Dummy weight: 150g One drop at each side, Drop test Height: 170cm total drops: 6 Acceleration spectral density:10- 1000Hz EN/IEC 60068-2-6, Test Fc Vibration Acceleration: 20m/s2 5 cycles per axis (sinusoidal) Number of axes: 3 mutually perpendicular 12.3 Miscellaneous Item Standard Low High Duration Visual inspection of soldering pads. Solderability EN/IEC 60068-2-58, Test Td Estimation of how many % of the pads that are well tin plated. 12.4 Judgement standard The judgement of the above tests should be made as follows: 1. Visual inspection - Normal apperance with no obvious cracking, peeling-off. 2. Electrical inspection - The DUT satisfies the VSWR specification throughout the 2.4-2.5 GHz band 13. HAZARDOUS MATERIAL REGURATION CONFORMANCE Cadmium and cadmium compound. Lead and lead compound Organic brominated compound (PBB, PBDE) Mercury and mercury compound Polychlorinated biphenyl (PCB) Sexivalent chrome compound Polychlorinated naphthalene (PCN) Chlorinated paraffin (CP) Organic tin compound Mirex Asbestos Formaldehyde Azo compound Tetra-bromo-bisphenol-A-bis (TBBP-A-bis) 7 (10) Rev : FE010315-G / April 18 2005

Mica 2.4 GHz SMD Antenna 14. APPLICATION EXAMPLE 6 3 1 5 Front Surface Back Surface 4 C 2.4 GHz Module C 2 C t W Strip line h 7 7 Ground No crossing strip lines Fig. 1 General The antenna is of a quarter wave type and is dependent on the groundplane area to complete the antenna function. The antenna performance is also dependent on the size of the groundplane. 1. Placement of the antenna The antenna shall be placed on a groundplane area, preferably at the edge of the PCB oriented as above. 2. Placement of 2.4 GHz module To avoid losses in the strip line, the module shall be placed as close to the antenna as possible. 3. Strip line The strip line must be dimensioned according to your specific PCB. ( see fig 1). No crossing strip lines are allowed between the strip line and its ground plane. 4. Via connections To avoid spurious effects, via connections must be made to analogue ground. 5. Component matching Component values are depending on antenna placement, PCB dimensions and location of other components. 6. DC Block Might be needed depending on RF Module configuration. 7. Clearance Front surface: Minimum clearance to other components, C = 2-5 mm Back surface: Components allowed. 8. Casing material No metal casing or plastics using metal flakes shall be used, avoid also metallic based paint or laquer. Note ! Incorrect implementation of the antenna will affect the performance. Contact gigaAnt for implementation services. 8 (10) Rev : FE010315-G / April 18 2005

Mica 2.4 GHz SMD Antenna 15. PACKAGING 15.1 Shelf storage recommendation Temperature -10 to +40 degree C Humidity Less than 75% RH Shelf Life 18 Months Storage place Away from corrosive gas and direct sunlight 15.2 Tape characteristics W S0 F E1 P0 P1 P2 A0 B0 K0 T D0 D1 32±0.3 28.4±0.3 14.2±0.1 1.75±0.1 4.0±0.1 8.0±0.1 2.0±0.1 4.0±0.1 21±0.1 3.7±0.1 0.3±0.05 1.5±0.1 Min 2.0 Dimensions in millimeter Quantity Leading space Trailing space 2000 Pcs / reel 50 blank antenna holders 37 blank antenna holders 15.3 Reel dimension 15.4 Box dimension Material: Conductive Polystyrene Material: Cardboard Width [mm] W: 32 Width [mm] W: 345 Reel dia [mm] D: 330(13”) Breadth [mm] B: 345 Hub dia [mm] H: 100(4”) Thickness [mm] H: 45 Shaft dia [mm] C: 13 15.5 Bag properties 15.6 Reel label information Antistatic Aluminium Moisture Barrier Bag Thickness [mil] T: 3.2 9 (10) Rev : FE010315-G / April 18 2005

Mica 2.4 GHz SMD Antenna 16. CONTACT INFORMATION www.gigaAnt.com Europe & Africa America Asia and Pacific e-mail: info.EU@gigaAnt.com e-mail: info.US@gigaAnt.com e-mail: info.ASIA@gigaAnt.com Tel: +46 46 286 4177 Tel: +1 817 430 7291 Tel: +656 890 6200 Or your local gigaAnt representative 10 (10) Rev : FE010315-G / April 18 2005


Document Created: 2006-10-27 14:51:50
Document Modified: 2006-10-27 14:51:50
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC