User Manual 2

FCC ID: JQU801660B

Users Manual

Download: PDF
FCCID_3994973

Kapsch TrafficCom IVHS




     G4P Permanent Interior Transponder
     Mounting Instructions




The G4P interior transponder mounts on the vehicle windshield. The preferred mounting location
is between the roofline and the rear view mirror post. If there is not enough room in the preferred
mounting location to accommodate the G4P transponder, the transponder can be mounted
beside the rear view mirror post. The transponder is secured using 3M™ VHB™ foam tape.

Requirements                                                                  G4P Transponder Mounting Instructions
n   For reliable operation of the transponder, the vehicle must be            1. Select a mounting location on the front windshield. The G4P transponder
    equipped with only one transponder while passing through a toll              should be mounted ½ in., but no more that 2 in., from the roofline.
    facility. Other transponders present in or on the vehicle must be            The preferred mounting location is between the roofline and the rear
    switched off or enclosed in an RF shield.                                    view mirror mounting post, with a minimum of ½ in. between the
n   The mounting location must provide direct line-of-sight                      transponder and the rear view mirror post.
    communication between the transponder and the toll facility
                                                                                         windshield
    overhead antenna.
n   Do not mount the G4P transponder on vehicles:                                                                                                 roofline

    u   with non-metallic roofs.
                                                                                                                                ½ in. preferred
    u   with windshields covered in RF-blocking material (ex. metal oxide).                                                     2 in. max

    u   with a metallic center windshield dividing post.
    u   without center-mounted rear view mirrors.
n   Handheld mobile communication devices must not be located within                                                                transponder
    12 in. of the transponder.
                                                                                           ½ in. min.
n   Metal objects (except for the rear view mirror and the roof ) must not
                                                                                                        rear view mirror post
    be located within 6 in. of the transponder.
                                                                                                                     Preferred Mounting Location - Side View
n   G4P transponders cannot be used where local regulations prohibit
    mounting transponders on the windshield.
n   Apply 3M VHB acrylic foam tape in accordance with 3M document
    70-0704-8701-5.


                                                                                          4. The G4P tranponder is shipped in a transparent cap to protect the




                                                                                                                                                                        ©Kapsch TrafficCom IVHS. All rights reserved. Subject to alteration without notice.
               � in. preferred,                                                              VHB acrylic foam tape strips. Remove and discard cap.
               2 in. maximum                                             roofline
                                                                                          5. Remove the protective backing from the VHB acrylic foam tape
 orientation                                                                                 strips.
      arrow
                                                                                                                                   3M VHB acrylic foam tape strips
                                                                            transponder




               � in. minimum


                                                             rear view mirror post


                                           Preferred Mounting Location - Front View

                                                                                                                                         G4P Transponder - Rear View
2. If there is insufficient space in the preferred location, select an
   alternate mounting location beside the rear view mirror post:                          6. Firmly press the G4P transponder against the windshield in the
                                                                                             mounting location, ensuring the orientation arrows are pointing
                      � in. preferred,
                      2 in. maximum                                    roofline              skyward. Maintain pressure for 15 seconds to ensure a good bond.



      orientation arrow




 rear view
mirror post


                                         � in. min., 1� in. max
                                                                                                                         FCC Approved
                                          Alternate Mounting Location - Front View
                                                                                                       This device complies with part 15 of the FCC rules.
3. Three 3M VHB acrylic foam tape strips on the back of the G4P
                                                                                                  Operation is subject to the condition that this device
   transponder are used to mount the transponder to the windshield.
   Prepare the mounting location in accordance with 3M document                                            does does not cause harmful interference
   70-0704-8701-5.




      Kapsch Group
      The Kapsch Group and its entities Kapsch TrafficCom, Kapsch CarrierCom and Kapsch BusinessCom are specialised in the f­ uture-oriented market
      segments of Intelligent Transportation Systems (ITS) and Information and Communication Technology (ICT). Kapsch. Always one step ahead.
                                                                                                                                                                       801850-014 rev D.




      Kapsch TrafficCom IVHS | 6020 Ambler Drive | Mississauga, Ontario L4W 2P1 | CANADA | Phone +1 905 624 3020 | Fax +1 905 625 6197
      54 S. Commerce Way, Suite 100 | Bethlehem, PA 18017 | Phone +1 610 419 1479 | Fax +1 610 419 1489
      E-Mail ktc.ca.info@kapsch.net | ktc.us.info@kapsch.net | www.kapsch.net



Document Created: 2014-08-07 12:07:50
Document Modified: 2014-08-07 12:07:50

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC