DXX Test Report

FCC ID: JQ6-OK5422

Test Report

Download: PDF
FCCID_3391120

RF TEST REPORT Report No.: FCC IC_RF_SL16120101-HID-034 Rev 1.0 Supersede Report No.: FCC IC_RF_SL16120101-HID-034 Applicant : HID Global Corporation Product Name : Smart Card Reader Model No. : 5422 FCC 15.225 Test Standard : RSS-210 Issue 9: 2016 FCC 15.225 Test Method : ANSI C63.10 2013 RSS Gen Issue 4 2014 FCC ID : JQ5-OK5422 IC ID : 2236B-OK5422 Dates of test : 01/16/2017 to 01/30/2017 Issue Date : 02/16/2017 Test Result : ☒ Pass ☐ Fail Equipment complied with the specification [X ] Equipment did not comply with the specification [ ] This Test Report is Issued Under the Authority of: Gary Chou Chen Ge Test Engineer Engineer Reviewer This test report may be reproduced in full only Test result presented in this test report is applicable to the tested sample only Issued By: SIEMIC Laboratories 775 Montague Expressway, Milpitas, CA 95035 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 2 of 31 Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management throughout a project. Our extensive experience with China, Asia Pacific, North America, European, and International compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets. Accreditations for Conformity Assessment Country/Region Accreditation Body Scope USA FCC, A2LA EMC, RF/Wireless, Telecom Canada IC, A2LA, NIST EMC, RF/Wireless, Telecom Taiwan BSMI, NCC, NIST EMC, RF, Telecom, Safety Hong Kong OFTA, NIST RF/Wireless, Telecom Australia NATA, NIST EMC, RF, Telecom, Safety Korea KCC/RRA, NIST EMI, EMS, RF, Telecom, Safety Japan VCCI, JATE, TELEC, RFT EMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety EMC, RF/Wireless, Telecom, Safety Europe A2LA, NIST EMC, RF, Telecom, Safety Israel MOC, NIST EMC, RF, Telecom, Safety Accreditations for Product Certifications Country Accreditation Body Scope USA FCC TCB, NIST EMC, RF, Telecom Canada IC FCB, NIST EMC, RF, Telecom Singapore iDA, NIST EMC, RF, Telecom EU NB EMC & R&TTE Directive Japan MIC (RCB 208) RF, Telecom Hong Kong OFTA (US002) RF, Telecom 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 3 of 31 CONTENTS 1 REPORT REVISION HISTORY .......................................................................................................................................4 2 EXECUTIVE SUMMARY.................................................................................................................................................5 3 CUSTOMER INFORMATION ..........................................................................................................................................5 4 TEST SITE INFORMATION ............................................................................................................................................5 5 MODIFICATION .............................................................................................................................................................5 6 EUT INFORMATION ......................................................................................................................................................6 6.1 EUT Description ........................................................................................................................................................6 6.2 Radio Description ......................................................................................................................................................6 6.3 EUT test modes/configuration Description....................................................................................................................6 6.4 EUT Photos - External ...............................................................................................................................................7 6.5 EUT Photos - Internal ................................................................................................................................................8 6.6 EUT Test Setup Photos .............................................................................................................................................9 7 SUPPORTING EQUIPMENT/SOFTWARE AND CABLING DESCRIPTION ....................................................................... 10 7.1 Supporting Equipment ............................................................................................................................................. 10 7.2 Test Software Description ........................................................................................................................................ 10 8 TEST SUMMARY ......................................................................................................................................................... 11 9 MEASUREMENT UNCERTAINTY ................................................................................................................................. 12 9.1 Conducted Emissions .............................................................................................................................................. 12 9.2 Radiated Emissions (30MHz to 1GHz) ....................................................................................................................... 12 9.3 Radiated Emissions (1GHz to 40GHz) ....................................................................................................................... 13 9.4 RF conducted measurement..................................................................................................................................... 13 10 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS .................................................................................. 14 10.1 Antenna Requirement.......................................................................................................................................... 14 10.2 Conducted Emissions Test Result ........................................................................................................................ 15 10.3 Radiated Measurements ...................................................................................................................................... 18 10.3.1 Radiated Measurements 30MHz to 1GHz ......................................................................................................... 18 10.3.2 Radiated Measurements below 30MHz ............................................................................................................. 20 10.3.3 Frequency Stability ......................................................................................................................................... 25 10.3.4 Occupied bandwidth ....................................................................................................................................... 27 ANNEX A. TEST INSTRUMENT ........................................................................................................................................... 29 ANNEX B. SIEMIC ACCREDITATION ................................................................................................................................... 30 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 4 of 31 1 Report Revision History Report No. Report Version Description Issue Date FCC IC_RF_SL16120101-HID-034 - Original 02/01/2017 FCC IC_RF_SL16120101-HID-034 Rev 1.0 Rev 1.0 Updated FCC ID 02/16/2017 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 5 of 31 2 Executive Summary The purpose of this test program was to demonstrate compliance of following product Company: HID Global Corporation Product: Smart Card Reader Model: 5422 against the current Stipulated Standards. The specified model product stated above has demonstrated compliance with the Stipulated Standard listed on 1st page. 3 Customer information Applicant Name : HID Global Corporation Applicant Address : 15370 Barranca Parkway. Irvine, CA 92618 USA Manufacturer Name : HID Global Corporation Manufacturer Address : 15370 Barranca Parkway. Irvine, CA 92618 USA 4 Test site information Lab performing tests : SIEMIC Laboratories Lab Address : 775 Montague Expressway, Milpitas, CA 95035 FCC Test Site No. : 881796 IC Test Site No. : 4842D-2 VCCI Test Site No. : A0133 5 Modification Index Item Description Note - - - - 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 6 of 31 6 EUT Information 6.1 EUT Description Host Product Name Smart Card Reader Host Model No. 5422 Trade Name HID Serial No. N/A Input Power 5VDC Hardware version N/A Software version N/A Date of EUT received January 09, 2016 Equipment Class/ Category RFID Working Frequencies 13.56MHz Port/Connectors USB Remark N/A 6.2 Radio Description Specifications for Radio: Radio Type RFID Operating Frequency 13.56MHz Modulation ASK (13.56MHz) Number of Channels 1 Antenna Type Loop Antenna Gain 1 dBi Antenna connector type Printed Circuit Board-Permanent Channel List: Type Mode Channel No. Frequency (MHz) Available (Y/N) RFID 13.56MHz 1 13.56 Y 6.3 EUT test modes/configuration Description Mode Note RF test EUT is set to transmit at 13.56MHz Note: None 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 7 of 31 6.4 EUT Photos - External EUT Top Side View EUT Bottom Side View EUT Front Side View EUT Rear Side View EUT Left Side View EUT Right Side View 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 8 of 31 6.5 EUT Photos - Internal EUT Open Case View EUT Main PCB – Top View EUT Main PCB – Bottom View EUT Main PCB – Label View 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 9 of 31 6.6 EUT Test Setup Photos Radiated Emissions (<1GHz) – Front View Radiated Emissions (<1GHz) – Rear View Radiated Emissions (<30MHz) – Front View Radiated Emissions (<30MHz) – Rear View 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 10 of 31 7 Supporting Equipment/Software and cabling Description 7.1 Supporting Equipment Index Supporting Equipment Description Model Serial No. Manu Note 1 Laptop E5410 - Dell - 7.2 Test Software Description Test Item Software Description RF Testing - - 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 11 of 31 8 Test Summary Test Item Test standard Test Method/Procedure Pass / Fail FCC 15.203 ANSI C63.10 – 2013 ☒ Pass Antenna Requirement IC 558074 D01 DTS Meas. Guidance v03r02 ☐ N/A FCC 15.225(a) ☒ Pass AC Conducted Emissions Voltage ANSI C63.10 2013 IC RSS Gen (7.2.2) RSS Gen. 8.8 ☐ N/A Remark 1. AC Line tests were performed on the support equipment’s power adapter, laptop. Test Item Test standard Test Method/Procedure Pass / Fail FCC 15.225(a) FCC ANSI C63.10 2013 ☒ Pass Limit in the band of 13.553 – 13.567 MHz ☐ N/A IC RSS210(A2.6) IC RSS Gen 6.13 Limit in the band of 13.410 – 13.553 MHz FCC 15.225(b) FCC ANSI C63.10 2013 ☒ Pass and 13.567 – 13.710 MHz IC RSS210(A2.6) IC RSS Gen 6.13 ☐ N/A Limit in the band of 13.110 – 13.410 MHz FCC 15.225(c) FCC ANSI C63.10 2013 ☒ Pass and 13.710 – 14.010 MHz IC RSS210(A2.6) IC RSS Gen 6.13 ☐ N/A Limit outside the band of FCC 15.225(d), 15.209 FCC ANSI C63.10 2013 ☒ Pass 13.110 – 14.010 MHz ☐ N/A IC RSS210(A2.6) IC RSS Gen 6.13 ☐ Pass Receiver Spurious Emission IC - IC RSS Gen 7.1 ☒ N/A FCC 15.225(e) FCC - ☒ Pass Frequency Stability ☐ N/A IC RSS210(A2.6) IC RSS Gen 6.11 FCC - FCC - ☒ Pass Occupied Bandwidth ☐ N/A IC RSS-210(5.9.1) IC RSS Gen 6.6 2. All measurement uncertainties are not taken into consideration for all presented test result. 3. The applicant shall ensure frequency stability by showing that an emission is maintained Remark within the band of operation under all normal operating conditions as specified in the user’s manual. 4. Test Method: ANSI C63.10: 2013 / RSS – Gen Issue 4: November 2014. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 12 of 31 9 Measurement Uncertainty 9.1 Conducted Emissions The test is to measure the conducted emissions to the mains port of the EUT. Some error sources that can contribute to the total uncertainty: - Uncertainty of the receiver - Uncertainty of the LISN - Uncertainty of cables - Uncertainty due to the mismatches - Etc, see the below table for details Source of Uncertainty Value Probability Division Sensitivity Expanded (dB) Distribution Coefficient Uncertainty Receiver Reading 0.12 Rectangular 1.732 1 0.069284 Cable Insertion Loss 0.21 Normal 2 1 0.105 Filter Insertion Loss 0.25 Normal 2 1 0.125 LISN Insertion Loss 0.40 Normal 2 1 0.20 Receiver CW accuracy 0.5 Rectangular 1.732 1 0.2886836 Pulse Amplitude Response 1.5 Rectangular 1.732 1 0.86605081 PRF Response 1.5 Rectangular 1.732 1 0.86605081 Mismatch LISN - Receiver 0.25 U-Shape 1.414 1 0.1768033 LISN Impedance 2.5 Triangular 2.449 1 1.0208248 Combined Standard Uncertainty 1.928133 Expanded Uncertainty (K=2) 3.856266 The total derived measurement uncertainty is +/- 3.86 dB. 9.2 Radiated Emissions (30MHz to 1GHz) The test is to measure the radiated emissions of the EUT. Some error sources that can contribute to the total uncertainty: - Uncertainty of the receiver - Uncertainty of the antenna - Uncertainty of cables - Uncertainty due to the mismatches - NSA Calibration - Etc., details see the below table Value Probability Sensitivity Expanded Source of Uncertainty Division (dB) Distribution Coefficient Uncertainty Receiver Reading 0.12 Rectangular 1.732 1 0.069284 Cable Insertion Loss 0.21 Normal 2 1 0.105 Filter Insertion Loss 0.25 Normal 2 1 0.125 Antenna Factor 0.65 Normal 2 1 0.325 Receiver CW accuracy 0.5 Rectangular 1.732 1 0.2886836 Pulse Amplitude Response 1.5 Rectangular 1.732 1 0.86605081 PRF Response 1.5 Rectangular 1.732 1 0.86605081 Mismatch Filter - Receiver 0.25 U-Shape 1.414 1 0.1768033 NSA Calibration 4.0 U-Shape 1.414 1 2.8288543 Combined Standard Uncertainty 3.0059131 Expanded Uncertainty (K=2) 6.0118262 The total derived measurement uncertainty is +/- 6.00 dB. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 13 of 31 9.3 Radiated Emissions (1GHz to 40GHz) The test is to measure the radiated emissions of the EUT. Some error sources that can contribute to the total uncertainty: - Uncertainty of the receiver - Uncertainty of the antenna - Uncertainty of cables - Uncertainty due to the mismatches - VSWR Calibration - Etc., details see the below table Value Probability Sensitivity Expanded Source of Uncertainty Division (dB) Distribution Coefficient Uncertainty Receiver Reading 0.12 Rectangular 1.732 1 0.0692840 Cable Insertion Loss 0.21 Normal 2 1 0.1050000 Filter Insertion Loss 0.25 Normal 2 1 0.1250000 Antenna Factor 0.65 Normal 2 1 0.3250000 Receiver CW accuracy 0.5 Rectangular 1.732 1 0.2886836 Pulse Amplitude Response 1.5 Rectangular 1.732 1 0.8660508 PRF Response 1.5 Rectangular 1.732 1 0.8660508 Mismatch Filter - Receiver 0.25 U-Shape 1.414 1 0.1768033 VSWR Calibration 2.0 U-Shape 1.414 1 1.4144272 Combined Standard Uncertainty 4.2363 Expanded Uncertainty (K=2) 8.4726 The total derived measurement uncertainty is +/- 8.47 dB. 9.4 RF conducted measurement The test is to measure the RF output power from the EUT. Some error sources that can contribute to the total uncertainty: - Uncertainty of the Reference Level Uncertainty - Uncertainty of variable attenuators - Uncertainty of cables - Uncertainty due to the mismatches Value Probability Division Sensitivity Expanded Source of Uncertainty (dB) Distribution Coefficient Uncertainty Reference Level 0.12 Rectangular 1.732 1 0.069284 Cable Insertion Loss 0.21 Normal 2 1 0.105 Attenuator 0.25 Normal 2 1 0.125 Mismatch 0.25 U-Shape 1.414 1 0.1768033 Combined Standard Uncertainty 0.476087 Expanded Uncertainty (K=2) 0.952174 The total derived measurement uncertainty is +/- 0.95 dB. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 14 of 31 10 Measurements, examination and derived results 10.1 Antenna Requirement Spec Requirement Applicable An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. Antenna requirement must meet at least one of the following: §15.203 ☒ a) Antenna must be permanently attached to the device. b) The antenna must use a unique type of connector to attach to the device. c) Device must be professionally installed. The installer shall be responsible for ensuring that the correct antenna is employed by the device. The RFID antenna is integral to the PCB board permanently to the device which meets the requirement (See Remark Internal Photographs submitted as another Exhibit). Result ☒ PASS ☐ FAIL 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 15 of 31 10.2 Conducted Emissions Test Result Conducted Emission Limit Frequency ranges Limit (dBuV) (MHz) QP Average 0.15 ~ 0.5 66 – 56 56 – 46 0.5 ~ 5 56 46 5 ~ 30 60 50 Spec Item Requirement Applicable For an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line § 15.207, on any frequency or frequencies, within the band 150 kHz to 30 MHz, shall not exceed a) the limits set in § 15.207, as measured using a 50 μH/50 ohms line impedance ☒ RSS210(A8.1) stabilization network (LISN). AC Line conducted emission within the band 150kHz to 30MHz Test Setup - The EUT and supporting equipment were set up in accordance with the requirements of the standard on top of a 1.5m x 1m x 0.8m high, non-metallic table, as shown in Annex B. Procedure - The power supply for the EUT was fed through a 50/50H EUT LISN, connected to filtered mains. - The RF OUT of the EUT LISN was connected to the EMI test receiver via a low-loss coaxial cable. - All other supporting equipment was powered separately from another main supply. Temperature 21°C Test Date 01/17/2017 Environmental conditions Relative Humidity 38 % Atmospheric Pressure 1025 mbar Remark The EUT was tested at 120VAC, 60Hz. Result ☒ Pass ☐ Fail Test Data ☒ Yes ☐ N/A Test Plot ☒ Yes ☐ N/A Test was done by Bryan Smith at Conducted Emission test site. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 16 of 31 Test specification: Conducted Emissions Mains Power: 5VDC Tested by: Bryan Smith ☒ Pass Result: ☐ Fail Test Date: 04/21/2016 Remarks: AC Line @ Live Live Measurements Frequency Raw Cable Factors Level Measurement Live/ Limit Margin Pass /Fail MHz dBuV Loss dB dBuV Type Neutral dBuV dB 0.15 39.52 10 1.74 51.26 Quasi Peak Live 66 -14.74 Pass 0.72 31.82 10.01 0.56 42.39 Quasi Peak Live 56 -13.61 Pass 0.69 30.61 10.01 0.56 41.18 Quasi Peak Live 56 -14.82 Pass 0.76 29.06 10.01 0.55 39.63 Quasi Peak Live 56 -16.37 Pass 0.65 27.99 10.01 0.57 38.58 Quasi Peak Live 56 -17.42 Pass 0.17 39.21 10 1.5 50.71 Quasi Peak Live 64.94 -14.23 Pass 13.56 19.02 10.06 0.55 29.63 Quasi Peak Live 60 -30.37 Pass 0.15 21.13 10 1.74 32.87 Average Live 56 -23.13 Pass 0.72 27.06 10.01 0.56 37.63 Average Live 46 -8.37 Pass 0.69 27.23 10.01 0.56 37.8 Average Live 46 -8.2 Pass 0.76 25.33 10.01 0.55 35.9 Average Live 46 -10.1 Pass 0.65 24.47 10.01 0.57 35.05 Average Live 46 -10.95 Pass 0.17 21.29 10 1.5 32.79 Average Live 54.94 -22.15 Pass 13.56 5.99 10.06 0.55 16.6 Average Live 50 -33.4 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 17 of 31 Test specification: Conducted Emissions Mains Power: 5VDC Tested by: Rachana Khanduri ☒ Pass Result: ☐ Fail Test Date: 04/21/2016 Remarks: AC Line @ Neutral Neutral Measurements Frequency Raw Cable Factors Level Measurement Live/ Limit Margin Pass /Fail MHz dBµV Loss dB dBµV Type Neutral dBµV dB 0.17 37.49 10 1.52 49.01 Quasi Peak Neutral 65.04 -16.02 Pass 0.73 32.16 10.01 0.56 42.73 Quasi Peak Neutral 56 -13.27 Pass 0.69 31 10.01 0.56 41.58 Quasi Peak Neutral 56 -14.42 Pass 0.18 39.16 10 1.42 50.58 Quasi Peak Neutral 64.53 -13.94 Pass 0.76 29.13 10.01 0.55 39.69 Quasi Peak Neutral 56 -16.31 Pass 0.66 28.08 10.01 0.57 38.67 Quasi Peak Neutral 56 -17.33 Pass 13.56 19.09 10.06 0.55 29.7 Quasi Peak Neutral 60 -30.31 Pass 0.17 20.14 10 1.52 31.67 Average Neutral 55.04 -23.37 Pass 0.73 27.23 10.01 0.56 37.8 Average Neutral 46 -8.2 Pass 0.69 27.69 10.01 0.56 38.26 Average Neutral 46 -7.74 Pass 0.18 17.75 10 1.42 29.17 Average Neutral 54.53 -25.35 Pass 0.76 25.52 10.01 0.55 36.09 Average Neutral 46 -9.92 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 18 of 31 10.3 Radiated Measurements 10.3.1 Radiated Measurements 30MHz to 1GHz Requirement(s): Spec Requirement Applicable Operation within the band 13.110–14.010 MHz: (a) The field strength of any emissions within the band 13.553–13.567 MHz shall not exceed 15,848 microvolts/meter at 30 meters. (b) Within the bands 13.410–13.553 MHz and 13.567–13.710 MHz, the field strength of any emissions shall not exceed 334 microvolts/meter at 30 meters. (c) Within the bands 13.110–13.410 MHz and 13.710–14.010 MHz the field strength of any emissions shall not exceed 106 microvolts/meter at 30 meters. 47 CFR §15.225 (d) The field strength of any emissions appearing outside of the 13.110–14.010 ☒ RSS-210 (A2.6) MHz band shall not exceed the general radiated emission limits in §15.209. Frequency range (MHz) Field Strength (uV/m) 30 – 88 100 88 – 216 150 216 960 200 Above 960 500 Test Setup 1. The EUT was switched on and allowed to warm up to its normal operating condition. 2. The test was carried out at the selected frequency points obtained from the EUT characterisation. Maximization of the emissions, was carried out by rotating the EUT, changing the antenna polarization, and adjusting the antenna height in the following manner: a. Vertical or horizontal polarisation (whichever gave the higher emission level over a full Procedure rotation of the EUT) was chosen. b. The EUT was then rotated to the direction that gave the maximum emission. c. Finally, the antenna height was adjusted to the height that gave the maximum emission. 3. A Quasi-peak measurement was then made for that frequency point. 4. Steps 2 and 3 were repeated for the next frequency point, until all selected frequency points were measured. Temperature 20.1°C Test Date 01/17/2017 Environmental conditions Relative Humidity 36% Atmospheric Pressure 1026mbar Remark - Result ☒ Pass ☐ Fail Test Data ☒ Yes (See below) ☐ N/A Test Plot ☒ Yes (See below) ☐ N/A Test was done by Bryan Smith at 10 meter chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 19 of 31 Test specification: Radiated Emissions Mains Power: 5V DC Tested by: Bryan Smith ☒ Pass Result: ☐ Fail Test Date: 04/18/2016 Remarks: N/A ƒ=30MHz – 1000MHz plot and 3 meter distance ƒ=30MHz – 1000MHz Measurements Frequency Raw Cable AF Level Measurement Hgt Azt Limit Margin Pass Pol MHz dBµV/m Loss dB dBµV/m Type cm Deg dBµV/m dB /Fail 54.25 63.31 1.38 -30.68 34 Quasi Max V 100 346 39.5 -5.5 Pass 40.69 61.8 1.18 -24.67 38.31 Quasi Max V 99 310 39.5 -1.19 Pass 67.81 61.02 1.46 -31.16 31.33 Quasi Max H 280 181 39.5 -8.17 Pass 30.00 39.01 0.99 -15.99 24.02 Quasi Max V 141 59 39.5 -15.48 Pass 797.59 40.46 4.61 -17.25 27.81 Quasi Max H 171 102 45.5 -17.69 Pass 501.74 53.32 3.61 -21.41 35.52 Quasi Max H 169 150 45.5 -9.98 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 20 of 31 10.3.2 Radiated Measurements below 30MHz Requirement(s): Spec Requirement Applicable Operation within the band 13.110–14.010 MHz (a) The field strength of any emissions within the band 13.553–13.567 MHz shall not exceed 15,848 microvolts/meter at 30 meters. (b) Within the bands 13.410–13.553 MHz and 13.567–13.710 MHz, the field strength of any 47 CFR §15.225 emissions shall not exceed 334 microvolts/meter at 30 meters. ☒ RSS-210 (A2.6) (c) Within the bands 13.110–13.410 MHz and 13.710–14.010 MHz the field strength of any emissions shall not exceed 106 microvolts/meter at 30 meters. (d) The field strength of any emissions appearing outside of the 13.110–14.010 MHz band shall not exceed the general radiated emission limits in §15.209. Test Setup For < 30MHz, Radiated emissions were measured according to ANSI C63.10. The EUT was set to transmit at the highest output power. Procedure The EUT was set 3 meter away from the measuring antenna. The loop antenna was positioned 1 meter above the ground from the center of the loop. The measuring bandwidth was set to 10 kHz. The limit is converted from microvolt/meter to decibel microvolt/meter. Temperature 22°C Test Date 01/17/2017 Environmental conditions Relative Humidity 40% Atmospheric Pressure 1026mbar Remark - Result ☒ Pass ☐ Fail Test Data ☒ Yes (See below) ☐ N/A Test Plot ☒ Yes (See below) ☐ N/A Test was done by Bryan Smith at 10 meter chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 21 of 31 Test specification: Radiated Spurious Emissions Mains Power: 5V DC Tested by: Bryan Smith ☒ Pass Result: ☐ Fail Test Date: 01/17/2015 Remarks: ƒ= 100kHz – 30MHz plot, and loop antenna at 0 degree Quasi Max Measurement Frequency Raw Cable AF Level Measurement Pol Hgt Azt Limit Margin Pass MHz dBuV Loss dB dBuV/m Type (0/90) cm Deg dBuV/m dB /Fail 1.24 35.46 0.45 17.79 53.7 Quasi Max H 98 111 65.75 -12.05 Pass 0.10 41.39 0.21 48.31 89.92 Quasi Max H 98 124 107.6 -17.68 Pass 2.26 33.45 0.51 10.77 44.73 Quasi Max H 98 157 69.54 -24.81 Pass 6.22 30.83 0.61 2.34 33.77 Quasi Max H 98 104 69.54 -35.77 Pass 8.62 28.88 0.64 0.32 29.84 Quasi Max H 98 30 69.54 -39.7 Pass 13.56 45.21 0.68 -1.61 44.28 Quasi Max H 98 108 124.92 -80.64 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 22 of 31 Test specification: Radiated Spurious Emissions Mains Power: 5V DC Tested by: Bryan Smith ☒ Pass Result: ☐ Fail Test Date: 01/17/2015 Remarks: ƒ= 100kHz – 30MHz plot, and loop antenna at 90 degree Quasi Max Measurement Frequency Raw Cable AF Level Measurement Pol Hgt Azt Limit Margin Pass MHz dBuV Loss dB dBuV/m Type (0/90) cm Deg dBuV/m dB /Fail 1.23 35.57 0.45 17.83 53.85 Quasi Max V 98 300 65.78 -11.94 Pass 0.10 41.39 0.21 48.31 89.92 Quasi Max V 98 124 107.6 -17.68 Pass 1.84 34.95 0.49 13.15 48.59 Quasi Max V 98 222 69.54 -20.95 Pass 0.44 40.99 0.36 30.22 71.56 Quasi Max V 98 295 94.65 -23.09 Pass 20.28 41.06 0.82 -3.06 38.83 Quasi Max V 98 175 69.54 -30.72 Pass 13.56 54.24 0.68 -1.61 53.31 Quasi Max V 98 133 124.92 -71.61 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 23 of 31 Loop antenna at 0 degree Marker 1 [T1] RBW 10 kHz RF Att 20 dB Ref Lvl 60.64 dB  V/m VBW 30 kHz 117 dB* 13.56450902 MHz SWT 22.5 ms Unit dB  V/m 117 Qpeak LIMIT CHECK : PASSED A 110 100 90 IN1 1VIEW 1MA 80 70 1 60 TDS 50 40 30 20 Vasona Emission Software : EMiSoft 17 Center 13.56 MHz 90 kHz/ Span 900 kHz Date: 1.JAN.1997 00:36:26 Loop antenna at 0 degree Frequency (MHz) Amplitude (dBµV/m) 13.56450 60.64 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 24 of 31 Loop antenna at 90 degree Marker 1 [T1] RBW 10 kHz RF Att 20 dB Ref Lvl 56.05 dB  V/m VBW 30 kHz 117 dB* 13.56450902 MHz SWT 22.5 ms Unit dB  V/m 117 Qpeak LIMIT CHECK : PASSED A 110 100 90 IN1 1VIEW 1MA 80 70 60 TDS 1 50 40 30 20 Vasona Emission Software : EMiSoft 17 Center 13.56 MHz 90 kHz/ Span 900 kHz Date: 1.JAN.1997 00:31:12 Frequency (MHz) Amplitude (dBµV/m) 13.56450 56.05 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 25 of 31 10.3.3 Frequency Stability Requirement(s): Spec Requirement Applicable 47 CFR §15.225 e) Limit: ±0.01% of 13.56 MHz = 1356 Hz ☒ RSS-210 (A2.6) EUT Fast Power Meter Test Setup Environmental Chamber 1. The EUT was set up inside an environmental chamber. 2. The EUT was placed in the centre of the environmental. Frequency Stability was measured according to 47 CFR §2.1055. Measurement was taken with spectrum Procedure analyzer. The spectrum analyzer bandwidth and span was set to read in hertz. A voltmeter was used to monitor when varying the voltage. Temperature 20°C Test Date 04/27/2016 Environmental conditions Relative Humidity 41% Atmospheric Pressure 1026mbar Remark None Result ☒ Pass ☐ Fail Test Data ☒ Yes (See below) ☐ N/A Test Plot ☐ Yes (See below) ☒ N/A Test was done by Chen Ge at RF test site. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 26 of 31 Test Result for 13.56MHz Radio Frequency Stability versus Temperature: The Frequency tolerance of the carrier signal shall be maintained within ± 0.01% of the operating frequency over a temperature variation of -20ºC to +50ºC at normal supply voltage. Reference Frequency: 13.56MHz Temperature Measured Freq. Freq. Drift Freq. Deviation Pass/Fail (ºC) (MHz) (Hz) (Limit: 0.01%) 65 13.56083 830 <0.01 Pass 60 13.56083 830 <0.01 Pass 50 13.56083 830 <0.01 Pass 40 13.56083 830 <0.01 Pass 30 13.56083 830 <0.01 Pass 20 13.56083 830 <0.01 Pass 10 13.56083 830 <0.01 Pass 0 13.56081 810 <0.01 Pass -10 13.56079 790 <0.01 Pass -20 13.56081 810 <0.01 Pass Frequency Stability versus Input Voltage: The Frequency tolerance of the carrier signal shall be maintained within ± 0.01%, the frequency of the transmitter was measured at 85% and at 115% of the rated power supply voltage at a 20ºC environmental temperature. Carrier Frequency: 13.56MHz Measured Voltage Measured Freq. Freq. Drift Freq. Deviation ±15% of nominal Pass/Fail (MHz) (Hz) (Limit: 0.01%) (AC) 5.75 13.56083 830 <0.01 Pass 4.25 13.56083 830 <0.01 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 27 of 31 10.3.4 Occupied bandwidth Requirement(s): Spec Requirement Applicable The transmitter shall be operated at its maximum carrier power measured under normal test conditions. The span of the analyzer shall be set to capture all products of the modulation process, including the emission skirts. The resolution bandwidth shall be set to as close to 1% of the selected span as is possible without being below 1%. The video bandwidth shall be set to 3 times the resolution bandwidth. Video averaging is not permitted. Where practical, a RSS-Gen ☒ sampling detector shall be used given that a peak or peak hold may produce a wider 4.6.1 bandwidth than actual. The trace data points are recovered and directly summed in linear terms. The recovered amplitude data points, beginning at the lowest frequency, are placed in a running sum until 0.5% of the total is reached and that frequency recorded. The process is repeated for the highest frequency data points. This frequency is recorded. The span between the two recorded frequencies is the occupied bandwidth. Test Setup 1. The EUT was switched on and allowed to warm up to its normal operating condition. 2. To measure conducted, a SMA cable was used to replace the EUT antenna. To measure radiated, Procedure an external antenna was used to detect EUT transmission signal. 3. Measurement of the 99% Occupied Bandwidth of EUT transmission signal and make record. Temperature 22°C Test Date 04/19/2016 Environmental conditions Relative Humidity 39% Atmospheric Pressure 1025mbar Remark - Result ☒ Pass ☐ Fail Test Data ☐ Yes (See below) ☒ N/A Test Plot ☒ Yes (See below) ☐ N/A Test was done by Rachana Khanduri at 10 meter chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 28 of 31 Test results: 13.56 MHz Frequency (MHz) Occupied Bandwidth (KHz) 13.56 13.972 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 29 of 31 Annex A. TEST INSTRUMENT Instrument Model Serial # Cal Date Cal Cycle Cal Due In use Conducted Emissions R & S Receiver ESL6 100178 05/27/2016 1 Year 05/27/2017 CHASE LISN MN2050B 1018 08/07/2016 1 Year 08/07/2017 Radiated Emissions R & S Receiver ESIB 40 100179 06/03/2016 1 Year 06/03/2017 Preamplifier (100KHz-7GHz) LPA-6-30 11140711 02/10/2016 1 Year 02/10/2017 ETS-Lingren Loop Antenna 6512 00049120 08/20/2016 1 Year 08/20/2017 Bi-Log antenna (30MHz~2GHz) JB1 A030702 08/15/2016 1 Year 08/15/2017 Horn Antenna (1-26.5GHz) 3115 10SL0059 08/25/2016 1 Year 08/25/2017 10 Meters SAC 10M N/A 09/05/2016 1 Year 09/05/2017 Test Software Version Test Item Vendor Software Version Radiated Emission EMISoft EMISoft Vasona V5.0 Conducted Emission EMISoft EMISoft Vasona V5.0 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 30 of 31 Annex B. SIEMIC Accreditation Accreditations Document Scope / Remark ISO 17025 (A2LA) Please see the documents for the detailed scope ISO Guide 65 (A2LA) Please see the documents for the detailed scope TCB Designation A1, A2, A3, A4, B1, B2, B3, B4, C FCC DoC Accreditation FCC Declaration of Conformity Accreditation FCC Site Registration 3 meter site FCC Site Registration 10 meter site IC Site Registration 3 meter site IC Site Registration 10 meter site Radio & Telecommunications Terminal Equipment: EN45001 – EN ISO/IEC 17025 EU NB Electromagnetic Compatibility: EN45001 – EN ISO/IEC 17025 Singapore iDA Phase I, Phase II CB(Certification Body) Vietnam MIC Please see the document for the detailed scope CAB Accreditation (Phase II) OFCA Foreign Certification Body for Radio and Telecom Hong Kong OFCA (Phase I) Conformity Assessment Body for Radio and Telecom Radio: Scope A – All Radio Standard Specification in Category I Industry Canada CAB Telecom: CS-03 Part I, II, V, VI, VII, VIII 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC IC_RF_SL16120101-HID-034 Rev 1.0 No. Page 31 of 31 Radio: A1. Terminal equipment for purpose of calling Japan Recognized Certification Telecom: B1. Specified radio equipment specified in Article 38-2, Paragraph 1, Item Body Designation 1 of the Radio Law EMI: KCC Notice 2008-39, RRL Notice 2008-3: CA Procedures for EMI KN22: Test Method for EMI EMS: KCC Notice 2008-38, RRL Notice 2008-4: CA Procedures for EMS KN24, KN61000-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11: Test Method for EMS Korea CAB Accreditation Radio: RRL Notice 2008-26, RRL Notice 2008-2, RRL Notice 2008-10, RRL Notice 2007-49, RRL Notice 2007-20, RRL Notice 2007-21, RRL Notice 2007- 80, RRL Notice 2004-68 Telecom: President Notice 20664, RRL Notice 2007-30, RRL Notice 2008-7 with attachments 1, 3, 5, 6; President Notice 20664, RRL Notice 2008-7 with attachment 4 LP0002, PSTN01, ADSL01, ID0002, IS6100, CNS14336, PLMN07, PLMN01, Taiwan NCC CAB Recognition PLMN08 Taiwan BSMI CAB Recognition CNS 13438 R-3083: Radiation 3 meter site Japan VCCI C-3421: Main Ports Conducted Interference Measurement T-1597: Telecommunication Ports Conducted Interference Measurements EMC: AS/NZS CISPR 11, AS/NZS CISPR 14.1, AS/NZS CISPR22, AS/NZS 61000.6.3, AS/NZS 61000.6.4 Radio communications: AS/NZS 4281, AS/NZS 4268, AS/NZS 4280.1, AS/NZS 4280.2, AS/NZS 4295, AS/NZS 4582, AS/NZS 4583, AS/NZS 4769.1, Australia CAB Recognition AS/NZS 4769.2, AS/NZS 4770, AS/NZS 4771 Telecommunications: AS/ACIF S002:05, AS/ACIF S003:06, AS/ACIF S004:06 AS/ACIF S006:01, AS/ACIF S016:01, AS/ACIF S031:01, AS/ACIF S038:01, AS/ACIF S040:01, AS/ACIF S041:05, AS/ACIF S043.2:06, AS/ACIF S60950.1 AS/ACIF S002, AS/ACIF S003, AS/ACIF S004, AS/ACIF S006, AS/ACIF Australia NATA Recognition S016,AS/ACIF S031, AS/ACIF S038, AS/ACIF S040, AS/ACIF S041, AS/ACIF S043.2 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:


Document Created: 2017-03-20 13:32:16
Document Modified: 2017-03-20 13:32:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC