Installation Guide

FCC ID: JQ6-ICLASSR10F

Users Manual

Download: PDF
FCCID_4073014

2 Wire the reader INSTALLATION GUIDE PIGTAIL DESCRIPTION Yellow Beeper Input iCLASS SE® Reader Orange Black LED Input (GRN) Ground (RTN) 13.56 MHz / 2.4 GHz Contactless Red +VDC R10 PLT-03314, Rev. A.1 Drain Unused Violet *Tamper #1 www.hidglobal.com/PLT-03681 Violet/White *Tamper #2 ƒƒ Scan the QR code or visit the link to ƒƒ Scansiona il codice QR o visita il see the multi-language electronic link della versione Italiana di questo White Wiegand Data 1 version of this document. documento. ƒƒ Lisez le code QR ou suivez le lien ƒƒ Отсканируйте QR-код или пройдите по Green Wiegand Data 0 pour consulter la version française de ссылке, чтобы получить версию этого ce document. документа на русском языке. *T  amper Output. When activated or when the ƒƒ Escanee el código QR o visite el ƒƒ 扫描 QR 码或访问此 文档的中文版本的 reader is unpowered, the circuit between vínculo para consultar la versión en 链接。 Tamper#1 and Tamper#2 reader control lines Español de este documento. ƒƒ この文書の日本語版を表示するには、QR will open. ƒƒ Scannen Sie den QR-Code oder コードをスキャンするか、リンクを クリ öffnen Sie den Link für die deutsche ックします。 Note: Wiring the reader incorrectly may Version dieses Dokuments. ƒƒ QR 코드를 스캔하거나 링크를 방문하면 이 permanently damage the reader. ƒƒ Faça a leitura do código QR ou acesse 문서의 한국어 버전을 볼 수 있습니다. o link da versão em português deste 9" documento. (0.23m) Supplied parts ƒƒ iCLASS SE R10 Reader (1) ƒƒ Installation Guide (1) ƒƒ 0.138-20 x 1.5" screws (2) – for installing the ƒƒ M3.5 x 12mm screws (2) – for Metric (EU etc) junction box installation ƒƒ 0.138-32 x 0.375" security screw (1) – 3 Secure the reader to the backplate reader directly to a wall (no junction box) alternative security screw for attaching the ƒƒ 0.138-32 x 0.375" screws (3) – for Imperial reader to the back plate 1 (US) junction box installation (2) and attaching the reader to the back plate (1) Recommended parts (not supplied) 2 ƒƒ Cable, 5-9 conductor (Wiegand or ƒƒ Reader spacer (PN: 6132AKB) when Clock‑and-Data) mounting on or near metal or metal junction ƒƒ Certified DC power supply boxes - see How to Order Guide ƒƒ Metal or plastic junction box ƒƒ IP65 Mounting gasket (PN: IP65GSKT-R10, ƒƒ Security tool HID 04-0001-03 (for anti- 10 pcs per kit), recommended for outdoor tamper screw) installation ƒƒ Drill with various bits for mounting hardware ƒƒ Junction box ƒƒ Mounting hardware © 2018 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID Brick logo, the Chain Design, HID Reader Manager, HID Mobile Access, and iCLASS SE are trademarks or registered trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Optional Features Optical Tamper enabled by default – Once activated, when the mounting plate is 3 removed, the optical tamper will open the circuit between Tamper#1 and Tamper#2 4 reader control lines. Tamper#1 and Tamper#2 control lines are interchangeable. Either of these lines can be connected with the reader ground line to reduce the number of cable cores required in the reader cable. The tamper control lines can operate within 0-12 VDC and 0-100 mA. Configuration – The reader can be modified to meet the specific requirements of an 1. Align the top of the reader with the top of the backplate. installation. Configuration options include; audio visual, and CSN outputs. See the HID 2. Hook the top of the reader on the top of the backplate. Reader Manager™ solution on www.hidglobal.com for further details. 3. Align the bottom of reader with the bottom of the backplate. 4. Secure the reader to the backplate using one of the supplied screws: 1 Mount the backplate Security/non-tamper screw: 0.138-32 x 0.375" screw (supplied) Non-security/standard screw: 0.138-32 x 0.375" screw (supplied) ATTENTION Observe precautions for handling ELECTROSTATIC SENSITIVE DEVICES 4 Power and test the reader Mounting directly to the wall/ Mounting to a junction box mullion mount Junction box (not supplied) Mud ring required to mount on single gang junction box (not supplied) 1 1 2 2 Optional gasket Use supplied 0.138-20 x 1.5" screws For Imperial (US): Use supplied 0.138-32 x 0.375" screws For Metric (EU etc): Turn on the power. Test the reader with a card. Use supplied M3.5 x 12mm screws The reader should beep and the The reader should beep and the light bar should flash. light bar should flash. hi d glo b a l.com An ASSA ABLOY Group brand

Specifications Korean KCC INPUT VOLTAGE (VDC) 12 VDC R10F CURRENT 항목 규격 송신주파수 RFID:13.56 MHz, BLE 2.4 -2.48GHz STANDBY AVG1 46 mA 수신주파수 RFID:13.56 MHz, BLE 2.4 -2.48GHz 출력 RFID: 10m에서 MAX AVG2 60 mA PEAK3 250 mA 47.544mv이하 OPERATING TEMPERATURE -30° F to 150° F 전원 DC 12.0V (-35° C to 66° C) 전파형식 A1D CABLE LENGTH4 Communication Lines (Wiegand) 발진방식 X-tal 22 AWG: 500 ft (152 m) 변조방식 RFID: ASK, NFC: GFSK REGULATORY REF NUMBER R10FKNN FREQUENCY BLE: 2.4 - 2.480 GHz, HF: 13.56 MHz Russia EAC FCC & IC IDS FCC-ID: JQ6-iCLASSR10F, IC-ID: 2236B-ICLASSR10F Дата изготовления указана на маркировке оборудования 1 Standby AVG - RMS current draw without a card in the RF field. Представитель в Российской Федерации 2 Maximum AVG - RMS current draw during continuous card reads. Not evaluated by UL. 3 Peak - highest instantaneous current draw during RF communication. Название ООО «Дофин» 4 Wiegand Cable Lengths: 500 ft (152 m) 22 AWG @ STANDBY AVG 46 mA, MAX AVG 62.5 mA, PEAK 250 mA Адрес 140573, РФ, Московская обл., Озерский район, с. Бояркино Контактное лицо Л.Н. Голубова Regulatory Телефон +7 495 223 6008 UL e-mail local.declarant@gmail.com Connect only to a Listed Access Control / Burglary power-limited power supply. These readers are intended to be used with listed (UL294) control equipment. Suitable for outdoor use. Japan MIC “ この装置は総務省の型式指定を受けています。 ” Only Wiegand and Bluetooth communications have been evaluated by UL. iCLASS SE readers are compatible with HID Mobile Access® version 3.0.0 and later using mobile devices with BLE version 4.2 and later listed at: (総務省指定番号は第AC-ｘｘｘｘｘ号です) https://www.hidglobal.com/mobile-access-compatible-devices. 本製品は電波を使用したRFID 機器の読み取り・書き込み装置です。 そのため使用する用途・場所によっては、医療機器に影響を与える恐れがあります Install in accordance with NFPA70 (NEC) Local Codes, and authorities having jurisdiction. Follow all National and Local Codes. UL 294 Performance Levels Access Control Japan Giteki for BLE Destructive Endurance Stand-by Model # Line Security Conditions Attack Level Level Power Level R10F Level Level I Level I Level IV Level I R xxx-xxxxxx FCC Israel This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ‫יטוחלא הלעפה ןוישרמ רוטפו ״ינשמ״ סיסב לע וניה רישכמב שומישה‬. (1) This device may not cause harmful interference, and (2) this device must accept any interference ‫דבלב חוקלה לש ימצע שומישל ״קזב תלועפב״ קר‬, ‫יטוחלא הלעפה ןוישרמ רוטפ חוקלה‬. received, including interference that may cause undesired operation. ‫רישכמה לש תירוקמה הנטנאה תא ףילחהל רוסא‬, ‫רחא ינכט יוניש לכ וב תושעל אלו‬. CAUTION: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant Brazil to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency Compliance Statement Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela energy and, if not installed and used in accordance with the instructions, may cause harmful interference Resolução 242/2000, e atende aos requisitos técnicos aplicados. Para maiores informações, consulte o to radio communications. However, there is no guarantee that interference will not occur in a particular site da ANATEL - www.anatel.gov.br installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the This product is homologated at ANATEL according to procedure regulated by Resolution 242/2000, and interference by one or more of the following measures: it complies with the applicable technical requirements. For more information, consult ANATEL website - www.anatel.gov.br ƒƒ Reorient or relocate the receiving antenna. ƒƒ Increase the separation between the equipment and receiver. ƒƒ Connect the equipment into an outlet on a circuit different from that to which the receiver is RF Warning Statement Per Article 6 of Resolution 506, equipment of restricted radiation must carry the following statement in a connected. visible location: ƒƒ Consult the dealer or an experienced radio/TV technician for help. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em Canada Radio Certification caráter primário. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the This equipment operates in secondary character, meaning it does not have the right of protection against following two conditions: (1) this device may not cause interference, and (2) this device must accept any harmful interference, even against those the same character, and it cannot cause any interference to interference, including interference that may cause undesired operation of the device. systems operating in the primary character. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CE Marking HHHHH-AA-FFFFF HID Global hereby declares that these proximity readers are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Por el presente, HID Global declara que estos lectores de proximidad cumplen con los requisitos esenciales y otras disposiciones relevantes de la Directiva 2014/53/EU. UAE Singapore Indonesia HID Global déclare par la présente que ces lecteurs à proximité sont conformes aux exigences essentielles TRA et aux autres stipulations pertinentes de la Directive 2014/53/EU. Complies with (Certificate Number) REGISTERED NO: (PLG ID Number) A HID Global, por meio deste, declara que estes leitores de proximidade estão em conformidade com as IDA Standards nnnnnnn exigências essenciais e outras condições da diretiva 2014/53/EU. DA123456* DEALER NO: HID Global bestätigt hiermit, dass die Leser die wesentlichen Anforderungen und anderen relevanten Bestimmungen der Richtlinie 2014/53/EU erfüllen. DA37204/14 HID Global dichiara che i lettori di prossimità sono conformi ai requisiti essenziali e ad altre misure rilevanti come previsto dalla Direttiva europea 2014/53/EU. Download copies of the Radio Equipment Directive (RED) Declaration of Conformity (DoC) at: http://www. hidglobal.com/certifications South Africa Australia and New Zealand Taiwan TA XXXX-YYYY According to “Administrative Regulations on Low Power Radio Waves Radiated Devices” Without APPROVED permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, E4662 enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency device. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. HID Global Americas & Corporate Asia Pacific Europe, Middle East & Africa Brazil 611 Center Ridge Drive 19/F 625 King's Road Phoenix Road Condomínio Business Center Austin, TX 78758 North Point, Island East Haverhill, Suffolk CB9 7AE Av. Ermano Marchetti, 1435 USA Hong Kong United Kingdom Galpão A2 - CEP 05038-001 Support: 866-607-7339 Support: 852-3160-9833 Support: 44 (0) 1440 711 822 Lapa - São Paulo / SP Fax: 949-732-2120 Fax: 852-3160-4809 Fax: 44 (0) 1440 714 840 Brazil Phone: +55 11 5514-7100 15 Equipment General Signaling 8T2 9 Equipment E4662 ACC Control READER ABCD12345678 PLT-03314, Rev. A.1 hi d glo b a l.com An ASSA ABLOY Group brand


Document Created: 2018-11-06 08:42:40
Document Modified: 2018-11-06 08:42:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC