Test Report

FCC ID: JQ6-BCC101

Test Report

Download: PDF
FCCID_3048048

RF TEST REPORT Report No.: FCC_IC_RF_SL16041201-HID-019 Supersede Report No.: NONE Applicant : HID Global Corporation Product Name : USB Coupler Model No. : BCC101 FCC 15.225 Test Standard : RSS-210 Issue 8: 2010 FCC 15.225 Test Method : ANSI C63.10 2013 RSS Gen Issue 4 2014 FCC ID : JQ6-BCC101 IC ID : 2236B-BCC101 Dates of test : 05/31/2016 to 06/07/2016 Issue Date : 06/10/2016 Test Result : ☒ Pass ☐ Fail Equipment complied with the specification [X ] Equipment did not comply with the specification [ ] This Test Report is Issued Under the Authority of: Teody Manansala Chen Ge Test Engineer Engineer Reviewer This test report may be reproduced in full only Test result presented in this test report is applicable to the tested sample only Issued By: SIEMIC Laboratories 775 Montague Expressway, Milpitas, CA 95035 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 2 of 33 Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management throughout a project. Our extensive experience with China, Asia Pacific, North America, European, and International compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets. Accreditations for Conformity Assessment Country/Region Accreditation Body Scope USA FCC, A2LA EMC, RF/Wireless, Telecom Canada IC, A2LA, NIST EMC, RF/Wireless, Telecom Taiwan BSMI, NCC, NIST EMC, RF, Telecom, Safety Hong Kong OFTA, NIST RF/Wireless, Telecom Australia NATA, NIST EMC, RF, Telecom, Safety Korea KCC/RRA, NIST EMI, EMS, RF, Telecom, Safety Japan VCCI, JATE, TELEC, RFT EMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety EMC, RF/Wireless, Telecom, Safety Europe A2LA, NIST EMC, RF, Telecom, Safety Israel MOC, NIST EMC, RF, Telecom, Safety Accreditations for Product Certifications Country Accreditation Body Scope USA FCC TCB, NIST EMC, RF, Telecom Canada IC FCB, NIST EMC, RF, Telecom Singapore iDA, NIST EMC, RF, Telecom EU NB EMC & R&TTE Directive Japan MIC (RCB 208) RF, Telecom Hong Kong OFTA (US002) RF, Telecom 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 3 of 33 CONTENTS 1 REPORT REVISION HISTORY .......................................................................................................................................4 2 EXECUTIVE SUMMARY.................................................................................................................................................5 3 CUSTOMER INFORMATION ..........................................................................................................................................5 4 TEST SITE INFORMATION ............................................................................................................................................5 5 MODIFICATION .............................................................................................................................................................5 6 EUT INFORMATION ......................................................................................................................................................6 6.1 EUT Description ........................................................................................................................................................6 6.2 Radio Description ......................................................................................................................................................6 6.3 EUT test modes/configuration Description....................................................................................................................7 6.4 EUT Photos – External ..............................................................................................................................................8 6.5 EUT Photos – Internal................................................................................................................................................9 6.6 EUT Test Setup Photos ........................................................................................................................................... 10 7 SUPPORTING EQUIPMENT/SOFTWARE AND CABLING DESCRIPTION ....................................................................... 12 7.1 Supporting Equipment ............................................................................................................................................. 12 7.2 Cabling Description ................................................................................................................................................. 12 7.3 Test Software Description ........................................................................................................................................ 12 8 TEST SUMMARY ......................................................................................................................................................... 13 9 MEASUREMENT UNCERTAINTY ................................................................................................................................. 14 10 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS .................................................................................. 15 10.1 Antenna Requirement.......................................................................................................................................... 15 10.2 Conducted Emissions Test Result ........................................................................................................................ 16 10.3 Radiated Measurements 30MHz to 1GHz .............................................................................................................. 19 10.4 Radiated Measurements below 30MHz ................................................................................................................. 21 10.5 Frequency Stability.............................................................................................................................................. 26 10.6 Occupied bandwidth ............................................................................................................................................ 28 ANNEX A. TEST INSTRUMENT ........................................................................................................................................... 31 ANNEX B. SIEMIC ACCREDITATION ................................................................................................................................... 32 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 4 of 33 1 Report Revision History Report No. Report Version Description Issue Date FCC_IC_RF_SL16041201-HID-019 - Original 06/10/2016 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 5 of 33 2 Executive Summary The purpose of this test program was to demonstrate compliance of following product Company: HID Global Corporation Product: USB Coupler Model: BCC101 against the current Stipulated Standards. The specified model product stated above has demonstrated compliance with the Stipulated Standard listed on 1st page. 3 Customer information Applicant Name : HID Global Corporation Applicant Address : 15370 Barranca Parkway, Irvine, CA 92618 USA Manufacturer Name : HID Global Corporation Manufacturer Address : 10385 Westmoor Drive, Suite 300,Westminster, CO 80021 4 Test site information Lab performing tests : SIEMIC Laboratories Lab Address : 775 Montague Expressway, Milpitas, CA 95035 FCC Test Site No. : 881796 IC Test Site No. : 4842D-2 VCCI Test Site No. : A0133 5 Modification Index Item Description Note - - - - 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 6 of 33 6 EUT Information 6.1 EUT Description Product Name : USB Coupler Model No. : BCC101 Trade Name : HID Serial No. : N/A Input Power : 12V DC Product Hardware version : N/A Product Software version N/A Radio Hardware version N/A Radio Software version N/A Test SW Version N/A Date of EUT received : 05/31/2016 Equipment Class/ Category : DXX, DCD Working Frequencies : 125 kHz, 13.56MHz Port/Connectors : USB 6.2 Radio Description Specifications for Radio: Radio Type RFID Operating Frequency 125KHz, 13.56MHz Modulation ASK (125KHz), ASK (13.56MHz) Channel Spacing None Antenna Type inductor coil type, mounted external to printed circuit board Antenna Gain 1 dBi Antenna Connector Type soldered to printed circuit board Channel List: Type Mode Channel No. Frequency (MHz) Available (Y/N) RFID 125KHz 1 0.125 Y RFID 13.56MHz 1 13.56 Y 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 7 of 33 6.3 EUT test modes/configuration Description Mode Note RF test EUT is set to continuously transmit at 13.56MHz and 125kHz Note: None Test Item Operating mode Tested antenna port Test frequencies Antenna Requirement N/A - Conducted Emissions Voltage Continuous Transmit - Limit in the band of 13.553 – 13.567 MHz Continuous Transmit - Limit in the band of 13.410 – 13.553 MHz and Continuous Transmit - 13.567 – 13.710 MHz 125kHz Limit in the band of 13.110 – 13.410 MHz and 13.56MHz Continuous Transmit - 13.710 – 14.010 MHz Limit outside the band of 13.110 – 14.010 MHz Continuous Transmit - Frequency Stability Continuous Transmit - Occupied Bandwidth Continuous Transmit - Note: EUT uses a PCB trace antenna attached to the PCB board. Only radiated measurements were performed during the test. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 8 of 33 6.4 EUT Photos – External Top View Bottom View Front View Rear View Left Side View Right Side View 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 9 of 33 6.5 EUT Photos – Internal PCBA Top View PCBA Bottom View 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 10 of 33 6.6 EUT Test Setup Photos AC Line Conducted Emissions– Front View AC Line Conducted Emissions– Rear View Radiated Emissions (<1GHz) – Front View Radiated Emissions (<1GHz) – Rear View Radiated Emissions (<30MHz) – Front View 0 degree Radiated Emissions (<30MHz) – Rear View 0 degree 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 11 of 33 Radiated Emissions (<30MHz) – Front View 0 degree Radiated Emissions (<30MHz) – Rear View 0 degree 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 12 of 33 7 Supporting Equipment/Software and cabling Description 7.1 Supporting Equipment Index Supporting Equipment Model Serial No Manu Note Description 1 Laptop Thinkpad L3-BY5447 07/86 IBM - 7.2 Cabling Description Connection Start Connection Stop Length / shielding Info Name Note From I/O Port To I/O Port Length (m) Shielding USB EUT USB Laptop USB 1M N/A - 7.3 Test Software Description Test Item Software Description RF Testing RealTerm Set the EUT to transmit at 125KHz and 13.56MHz 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 13 of 33 8 Test Summary Test Item Test standard Test Method/Procedure Pass / Fail FCC 15.203 ANSI C63.10 – 2013 ☒ Pass Antenna Requirement IC 558074 D01 DTS Meas. Guidance v03r02 ☐ N/A FCC 15.225(a) ☒ Pass AC Conducted Emissions Voltage ANSI C63.10 2013 IC RSS Gen (7.2.2) RSS Gen. 8.8 ☐ N/A Remark 1. AC Line tests were performed on the support equipment’s power adapter, laptop. Test Item Test standard Test Method/Procedure Pass / Fail FCC 15.225(a) FCC ANSI C63.10 2013 ☒ Pass Limit in the band of 13.553 – 13.567 MHz ☐ N/A IC RSS210(A2.6) IC RSS Gen 6.13 Limit in the band of 13.410 – 13.553 MHz FCC 15.225(b) FCC ANSI C63.10 2013 ☒ Pass and 13.567 – 13.710 MHz IC RSS210(A2.6) IC RSS Gen 6.13 ☐ N/A Limit in the band of 13.110 – 13.410 MHz FCC 15.225(c) FCC ANSI C63.10 2013 ☒ Pass and 13.710 – 14.010 MHz IC RSS210(A2.6) IC RSS Gen 6.13 ☐ N/A Limit outside the band of FCC 15.225(d), 15.209 FCC ANSI C63.10 2013 ☒ Pass 13.110 – 14.010 MHz IC RSS210(A2.6) IC RSS Gen 6.13 ☐ N/A ☐ Pass Receiver Spurious Emission IC - IC RSS Gen 7.1 ☒ N/A FCC 15.225(e) FCC - ☒ Pass Frequency Stability ☐ N/A IC RSS210(A2.6) IC RSS Gen 6.11 FCC - FCC - ☒ Pass Occupied Bandwidth ☐ N/A IC RSS-210(5.9.1) IC RSS Gen 6.6 2. All measurement uncertainties are not taken into consideration for all presented test result. 3. The applicant shall ensure frequency stability by showing that an emission is maintained Remark within the band of operation under all normal operating conditions as specified in the user’s manual. 4. Test Method: ANSI C63.10: 2013 / RSS – Gen Issue 4: November 2014. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 14 of 33 9 Measurement Uncertainty Test Item Description Uncertainty Confidence level of approximately 95% AC Conducted Emissions Voltage (in the case where distributions are ±3.5dB normal), with a coverage factor of 2 Limit in the band of 13.553 – 13.567 MHz +5.6dB/-4.5dB Limit in the band of 13.410 – 13.553 MHz and +5.6dB/-4.5dB 13.567 – 13.710 MHz Confidence level of approximately 95% Limit in the band of 13.110 – 13.410 MHz and (in the case where distributions are +5.6dB/-4.5dB 13.710 – 14.010 MHz normal), with a coverage factor of 2 (for EUTs < 0.5m X 0.5m X 0.5m) Limit outside the band of +5.6dB/-4.5dB 13.110 – 14.010 MHz Radiated Spurious Emissions +5.6dB/-4.5dB 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 15 of 33 10 Measurements, examination and derived results 10.1 Antenna Requirement Spec Requirement Applicable An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. Antenna requirement must meet at least one of the following: §15.203 ☒ a) Antenna must be permanently attached to the device. b) The antenna must use a unique type of connector to attach to the device. c) Device must be professionally installed. The installer shall be responsible for ensuring that the correct antenna is employed by the device. The RFID antenna is integral to the PCB board permanently to the device which meets the requirement (See Remark Internal Photographs submitted as another Exhibit). Result ☒ PASS ☐ FAIL 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 16 of 33 10.2 Conducted Emissions Test Result Conducted Emission Limit Frequency ranges Limit (dBuV) Section (MHz) QP Average 0.15 ~ 0.5 66 – 56 56 – 46 Class B 0.5 ~ 5 56 46 devices 5 ~ 30 60 50 Spec Item Requirement Applicable For an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line § 15.207, on any frequency or frequencies, within the band 150 kHz to 30 MHz, shall not exceed a) the limits set in § 15.207, as measured using a 50 μH/50 ohms line impedance ☒ RSS210(A8.1) stabilization network (LISN). AC Line conducted emission within the band 150kHz to 30MHz Test Setup - The EUT and supporting equipment were set up in accordance with the requirements of the standard on top of a 1.5m x 1m x 0.8m high, non-metallic table, as shown in Annex B. Procedure - The power supply for the EUT was fed through a 50/50H EUT LISN, connected to filtered mains. - The RF OUT of the EUT LISN was connected to the EMI test receiver via a low-loss coaxial cable. - All other supporting equipment was powered separately from another main supply. Temperature 21°C Test Date 06/07/2016 Environmental conditions Relative Humidity 38 % Atmospheric Pressure 1025 mbar Remark The EUT was tested at 120VAC, 60Hz. Result ☒ Pass ☐ Fail Test Data ☒ Yes ☐ N/A Test Plot ☒ Yes ☐ N/A Test was done by Teody Manansala at Conducted Emission test site. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 17 of 33 Test specification: Conducted Emissions Mains Power: 110VAC, 60Hz Tested by: Teody Manansala ☒ Pass Result: ☐ Fail Test Date: 06/07/2016 Remarks: AC Line @ Live Fundamental frequency Quasi Peak and Average Measurements Frequency Raw Cable Factors Level Measurement Line/ Limit Margin Pass /Fail MHz dBuV Loss dB dBuV Type Neutral dBuV dB 0.16 45.15 10.00 1.69 56.84 Quasi Peak Live 65.52 -8.68 Pass 13.56 35.41 10.06 0.59 46.05 Quasi Peak Live 60.00 -13.95 Pass 0.24 35.56 10.00 1.12 46.69 Quasi Peak Live 62.23 -15.54 Pass 0.33 27.50 10.01 0.85 38.36 Quasi Peak Live 59.47 -21.11 Pass 3.23 16.38 10.03 0.55 26.96 Quasi Peak Live 56.00 -29.04 Pass 3.14 16.73 10.03 0.55 27.30 Quasi Peak Live 56.00 -28.70 Pass 0.16 26.65 10.00 1.69 38.34 Average Live 55.52 -17.18 Pass 13.56 35.02 10.06 0.59 45.66 Average Live 50.00 -4.34 Pass 0.24 14.56 10.00 1.12 25.68 Average Live 52.23 -26.55 Pass 0.33 9.50 10.01 0.85 20.36 Average Live 49.47 -29.12 Pass 3.23 0.22 10.03 0.55 10.80 Average Live 46.00 -35.20 Pass 3.14 1.80 10.03 0.55 12.38 Average Live 46.00 -33.62 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 18 of 33 Test specification: Conducted Emissions Mains Power: 110VAC, 60Hz Tested by: Teody Manansala ☒ Pass Result: ☐ Fail Test Date: 06/07/2016 Remarks: AC Line @ Neutral Fundamental frequency Quasi Peak and Average Measurements Frequency Raw Cable Factors Level Measurement Line/ Limit Margin Pass /Fail MHz dBµV Loss dB dBµV Type Neutral dBµV dB 0.16 33.42 10.00 1.66 45.08 Quasi Peak Neutral 65.42 -20.34 Pass 13.56 35.77 10.06 0.59 46.41 Quasi Peak Neutral 60.00 -13.59 Pass 0.25 31.96 10.00 1.06 43.02 Quasi Peak Neutral 61.73 -18.71 Pass 1.94 14.66 10.02 0.55 25.24 Quasi Peak Neutral 56.00 -30.77 Pass 4.39 15.24 10.03 0.55 25.82 Quasi Peak Neutral 56.00 -30.18 Pass 1.84 15.45 10.02 0.55 26.03 Quasi Peak Neutral 56.00 -29.97 Pass 0.16 11.53 10.00 1.66 23.20 Average Neutral 55.42 -32.22 Pass 13.56 35.28 10.06 0.59 45.93 Average Neutral 50.00 -4.07 Pass 0.25 15.00 10.00 1.06 26.06 Average Neutral 51.73 -25.67 Pass 1.94 -0.40 10.02 0.55 10.18 Average Neutral 46.00 -35.83 Pass 4.39 -0.86 10.03 0.55 9.73 Average Neutral 46.00 -36.27 Pass 1.84 2.79 10.02 0.55 13.37 Average Neutral 46.00 -32.63 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 19 of 33 10.3 Radiated Measurements 30MHz to 1GHz Requirement(s): Spec Requirement Applicable Operation within the band 13.110–14.010 MHz: (a) The field strength of any emissions within the band 13.553–13.567 MHz shall not exceed 15,848 microvolts/meter at 30 meters. (b) Within the bands 13.410–13.553 MHz and 13.567–13.710 MHz, the field strength of any emissions shall not exceed 334 microvolts/meter at 30 meters. (c) Within the bands 13.110–13.410 MHz and 13.710–14.010 MHz the field strength of any emissions shall not exceed 106 microvolts/meter at 30 meters. 47 CFR §15.225 (d) The field strength of any emissions appearing outside of the 13.110–14.010 ☒ RSS-210 (A2.6) MHz band shall not exceed the general radiated emission limits in §15.209. Frequency range (MHz) Field Strength (uV/m) 30 – 88 100 88 – 216 150 216 960 200 Above 960 500 Test Setup 1. The EUT was switched on and allowed to warm up to its normal operating condition. 2. The test was carried out at the selected frequency points obtained from the EUT characterisation. Maximization of the emissions, was carried out by rotating the EUT, changing the antenna polarization, and adjusting the antenna height in the following manner: a. Vertical or horizontal polarisation (whichever gave the higher emission level over a full Procedure rotation of the EUT) was chosen. b. The EUT was then rotated to the direction that gave the maximum emission. c. Finally, the antenna height was adjusted to the height that gave the maximum emission. 3. A Quasi-peak measurement was then made for that frequency point. 4. Steps 2 and 3 were repeated for the next frequency point, until all selected frequency points were measured. Temperature 20.1°C Test Date 05/31/2016 Environmental conditions Relative Humidity 36% Atmospheric Pressure 1026mbar Remark - Result ☒ Pass ☐ Fail Test Data ☒ Yes (See below) ☐ N/A Test Plot ☒ Yes (See below) ☐ N/A Test was done by Teody Manansala at 10 meter chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 20 of 33 Test specification: Radiated Emissions Mains Power: 12VDC Tested by: Teody Manansala ☒ Pass Result: ☐ Fail Test Date: 05/31/2016 Remarks: 125KHz and 13.56MHz Below 1GHz ƒ=30MHz – 1000MHz plot and 3 meter distance ƒ=30MHz – 1000MHz Measurements Frequency Raw Cable AF Level Measurement Hgt Azt Limit Margin Pass Pol MHz dBµV/m Loss dB dBµV/m Type cm Deg dBµV/m dB /Fail 325.44 67.03 2.74 -25.22 44.55 Quasi Max H 100.00 30.00 46.02 -1.47 Pass 352.56 63.29 2.90 -24.75 41.44 Quasi Max H 100.00 43.00 46.02 -4.58 Pass 298.38 59.02 2.62 -26.11 35.53 Quasi Max H 116.00 281.00 46.02 -10.49 Pass 284.75 63.67 2.59 -26.25 40.00 Quasi Max H 104.00 273.00 46.02 -6.02 Pass 338.99 62.21 2.82 -25.12 39.91 Quasi Max H 100.00 48.00 46.02 -6.11 Pass 379.68 61.42 3.02 -24.16 40.28 Quasi Max H 100.00 264.00 46.02 -5.74 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 21 of 33 10.4 Radiated Measurements below 30MHz Requirement(s): Spec Requirement Applicable Operation within the band 13.110–14.010 MHz (a) The field strength of any emissions within the band 13.553–13.567 MHz shall not exceed 15,848 microvolts/meter at 30 meters. (b) Within the bands 13.410–13.553 MHz and 13.567–13.710 MHz, the field strength of any 47 CFR §15.225 emissions shall not exceed 334 microvolts/meter at 30 meters. ☒ RSS-210 (A2.6) (c) Within the bands 13.110–13.410 MHz and 13.710–14.010 MHz the field strength of any emissions shall not exceed 106 microvolts/meter at 30 meters. (d) The field strength of any emissions appearing outside of the 13.110–14.010 MHz band shall not exceed the general radiated emission limits in §15.209. Test Setup For < 30MHz, Radiated emissions were measured according to ANSI C63.10. The EUT was set to transmit at the highest output power. Procedure The EUT was set 3 meter away from the measuring antenna. The loop antenna was positioned 1 meter above the ground from the center of the loop. The measuring bandwidth was set to 10 kHz. The limit is converted from microvolt/meter to decibel microvolt/meter. Temperature 22°C Test Date 05/31/2016 Environmental conditions Relative Humidity 40% Atmospheric Pressure 1026mbar Remark - Result ☒ Pass ☐ Fail Test Data ☒ Yes (See below) ☐ N/A Test Plot ☒ Yes (See below) ☐ N/A Test was done by Teody Manansala at 10 meter chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 22 of 33 Test specification: Radiated Spurious Emissions Mains Power: 12VDC Tested by: Teody Manansala ☒ Pass Result: ☐ Fail Test Date: 05/31/2016 Remarks: 125KHz and 13.56MHz Below 30MHz @ 0 degree ƒ= 100kHz – 30MHz plot, and loop antenna at 0 degree Quasi Max Measurement Frequency Raw Cable AF Level Measurement Pol Hgt Azt Limit Margin Pass MHz dBuV Loss dB dBuV/m Type (0/90) cm Deg dBuV/m dB /Fail 0.97 40.20 0.21 12.49 52.90 Quasi Max H 100.00 165.00 67.90 -15.00 Pass 1.45 39.11 0.24 8.69 48.04 Quasi Max H 100.00 173.00 64.37 -16.33 Pass 0.53 36.87 0.18 17.20 54.25 Quasi Max H 100.00 204.00 73.11 -18.86 Pass 1.69 34.47 0.26 7.47 42.20 Quasi Max H 100.00 299.00 63.07 -20.87 Pass 2.33 34.38 0.30 4.91 39.59 Quasi Max H 100.00 330.00 69.54 -29.95 Pass 0.19 33.85 0.17 25.97 59.99 Quasi Max H 100.00 145.00 102.18 -42.19 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 23 of 33 Test specification: Radiated Spurious Emissions Mains Power: 12VDC Tested by: Teody Manansala ☒ Pass Result: ☐ Fail Test Date: 05/31/2016 Remarks: 125KHz and 13.56MHz Below 30MHz @ 90 degree ƒ= 100kHz – 30MHz plot, and loop antenna at 90 degree Quasi Max Measurement Frequency Raw Cable AF Level Measurement Pol Hgt Azt Limit Margin Pass MHz dBuV Loss dB dBuV/m Type (0/90) cm Deg dBuV/m dB /Fail 1.38 34.27 0.24 9.12 43.63 Quasi Max H 100.00 251.00 64.84 -21.20 Pass 1.58 34.48 0.25 8.00 42.74 Quasi Max H 100.00 317.00 63.64 -20.91 Pass 0.64 33.32 0.19 15.69 49.19 Quasi Max H 100.00 222.00 71.43 -22.24 Pass 2.34 34.27 0.30 4.86 39.43 Quasi Max H 100.00 2.00 69.54 -30.11 Pass 3.24 36.02 0.31 2.48 38.81 Quasi Max H 100.00 64.00 69.54 -30.73 Pass 0.49 36.02 0.17 17.92 54.10 Quasi Max H 100.00 107.00 93.86 -39.75 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 24 of 33 Loop antenna at 0 degree * RBW 10 kHz * Att 30 dB * VBW 30 kHz M1[1] 90.33 dBµV Ref 107.0 dBµV SWT 40ms 123.900100000 kHz FCC-15.225-125KHZ-FIELDSTR.LIN Limit Check PASS 1Pk 100 dBµV Line FCC-15.225-125PASS View M1 90 dBµV 80 dBµV 70 dBµV 60 dBµV 50 dBµV 40 dBµV 30 dBµV Tdf 20 dBµV PA 10 dBµV CF 125.0 kHz Span 50.0 kHz Date: 1.JUN.2016 01:12:45 Frequency (kHz) Amplitude (dBµV) 124.519 90.33 Loop antenna at 90 degree * RBW 10 kHz * Att 30 dB * VBW 30 kHz M1[1] 87.94 dBµV Ref 107.0 dBµV SWT 40ms 126.049900000 kHz FCC-15.225-125KHZ-FIELDSTR.LIN Limit Check PASS 1Pk 100 dBµV Line FCC-15.225-125PASS View M1 90 dBµV 80 dBµV 70 dBµV 60 dBµV 50 dBµV 40 dBµV 30 dBµV Tdf 20 dBµV PA 10 dBµV CF 125.0 kHz Span 50.0 kHz Date: 1.JUN.2016 01:18:45 Frequency (kHz) Amplitude (dBµV) 125.087 87.94 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 25 of 33 Loop antenna at 0 degree * RBW 10 kHz * Att 25 dB * VBW 30 kHz M1[1] 60.47 dBµV/m Ref 103.0 dBµV/m SWT 10ms 13.560000000 MHz Limit 100 dBµV/m Check PASS 1Pk View 90 dBµV/m Line FCC-15.225-13.5 PASS 80 dBµV/m 70 dBµV/m FCC-15.225-13.56MHz M1 60 dBµV/m 50 dBµV/m 40 dBµV/m 30 dBµV/m Tdf 20 dBµV/m 10 dBµV/m CF 13.56 MHz Span 900.0 kHz Date: 4.JUN.2016 00:33:48 Frequency (MHz) Amplitude (dBµV/m) 13.560450 69.24 Loop antenna at 90 degree * RBW 10 kHz * Att 25 dB * VBW 30 kHz M1[1] 60.10 dBµV/m Ref 103.0 dBµV/m SWT 10ms 13.559550000 MHz Limit 100 dBµV/m Check PASS 1Pk View 90 dBµV/m Line FCC-15.225-13.5 PASS 80 dBµV/m 70 dBµV/m FCC-15.225-13.56MHz M1 60 dBµV/m 50 dBµV/m 40 dBµV/m 30 dBµV/m Tdf 20 dBµV/m 10 dBµV/m CF 13.56 MHz Span 900.0 kHz Date: 4.JUN.2016 00:41:06 Frequency (MHz) Amplitude (dBµV/m) 13.560450 68.66 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 26 of 33 10.5 Frequency Stability Requirement(s): Spec Requirement Applicable 47 CFR §15.225 e) Limit: ±0.01% of 13.56 MHz = 1356 Hz ☒ RSS-210 (A2.6) EUT Fast Power Meter Test Setup Environmental Chamber 1. The EUT was set up inside an environmental chamber. 2. The EUT was placed in the centre of the environmental. Frequency Stability was measured according to 47 CFR §2.1055. Measurement was taken with spectrum Procedure analyzer. The spectrum analyzer bandwidth and span was set to read in hertz. A voltmeter was used to monitor when varying the voltage. Temperature 20°C Test Date 06/03/2016 Environmental conditions Relative Humidity 41% Atmospheric Pressure 1026mbar Remark None Result ☒ Pass ☐ Fail Test Data ☒ Yes (See below) ☐ N/A Test Plot ☐ Yes (See below) ☒ N/A Test was done by Teody Manansala at RF test site. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 27 of 33 Test Result for 13.56MHz Radio Frequency Stability versus Temperature: The Frequency tolerance of the carrier signal shall be maintained within ± 0.01% of the operating frequency over a temperature variation of -20ºC to +50ºC at normal supply voltage. Reference Frequency: 13.5600000 MHz at 20°C at 12 VDC Temperature Measured Freq. Freq. Drift Freq. Deviation Pass/Fail (ºC) (MHz) (Hz) (Limit: 0.01%) 50 13.5600000 0.00 <0.01 Pass 40 13.5600000 0.00 <0.01 Pass 30 13.5600000 0.00 <0.01 Pass 20 Reference (13.5600000 MHz) 10 13.5600735 73.5 <0.01 Pass 0 13.5600857 85.7 <0.01 Pass -10 13.5600857 85.7 <0.01 Pass -20 13.5600857 85.7 <0.01 Pass Frequency Stability versus Input Voltage: The Frequency tolerance of the carrier signal shall be maintained within ± 0.01%, the frequency of the transmitter was measured at 85% and at 115% of the rated power supply voltage at a 20ºC environmental temperature. Carrier Frequency: 13.5600000 MHz at 20°C at 12 VDC Measured Voltage Measured Freq. Freq. Drift Freq. Deviation ±15% of nominal Pass/Fail (MHz) (Hz) (Limit: 0.01%) (AC) 13.8 13.5600000 0 <0.01 Pass 10.2 13.5600000 0 <0.01 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 28 of 33 10.6 Occupied bandwidth Requirement(s): Spec Requirement Applicable The transmitter shall be operated at its maximum carrier power measured under normal test conditions. The span of the analyzer shall be set to capture all products of the modulation process, including the emission skirts. The resolution bandwidth shall be set to as close to 1% of the selected span as is possible without being below 1%. The video bandwidth shall be set to 3 times the resolution bandwidth. Video averaging is not permitted. Where practical, a RSS-Gen ☒ sampling detector shall be used given that a peak or peak hold may produce a wider 4.6.1 bandwidth than actual. The trace data points are recovered and directly summed in linear terms. The recovered amplitude data points, beginning at the lowest frequency, are placed in a running sum until 0.5% of the total is reached and that frequency recorded. The process is repeated for the highest frequency data points. This frequency is recorded. The span between the two recorded frequencies is the occupied bandwidth. Test Setup 1. The EUT was switched on and allowed to warm up to its normal operating condition. 2. To measure conducted, a SMA cable was used to replace the EUT antenna. To measure radiated, Procedure an external antenna was used to detect EUT transmission signal. 3. Measurement of the 99% Occupied Bandwidth of EUT transmission signal and make record. Temperature 22°C Test Date 06/01/2016 Environmental conditions Relative Humidity 39% Atmospheric Pressure 1025mbar Remark - Result ☒ Pass ☐ Fail Test Data ☐ Yes (See below) ☒ N/A Test Plot ☒ Yes (See below) ☐ N/A Test was done by Teody Manansala at 10 meter chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 29 of 33 Test results: 125 kHz Frequency (kHz) Occupied Bandwidth (KHz) 125.00 2.41 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 30 of 33 13.56 MHz * RBW 3 kHz * Att 0 dB * VBW 10 kHz M1[1] - 37.80 dBm Ref -10.0 dBm SWT 15ms 13.560000000 MHz Oc c Bw 6.986027944 kHz 1Pk T1[1] - 53.86 dBm -20 dBm View 13.556407186 MHz T2[1] - 52.56 dBm -30 dBm 13.563393214 MHz M1 -40 dBm T1 T2 -50 dBm -60 dBm -70 dBm -80 dBm -90 dBm -100 dBm CF 13.56 MHz Span 100.0 kHz Date: 1.JUN.2016 18:18:24 Frequency (MHz) Occupied Bandwidth (KHz) 13.56 6.986 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 31 of 33 Annex A. TEST INSTRUMENT Instrument Model Serial # Cal Date Cal Cycle Cal Due In use Conducted Emissions R & S Receiver ESIB 40 100179 06/03/2015 1 Year 06/03/2016 CHASE LISN MN2050B 1018 08/07/2015 1 Year 08/07/2016 Radiated Emissions R & S Receiver ESL6 100178 05/27/2015 1 Year 05/27/2016 R & S Receiver ESIB 40 100179 06/03/2015 1 Year 06/03/2016 Pre-Amplifier (1-26.5GHz) 8449B 3008A00715 03/04/2016 1 Year 03/04/2017 Preamplifier (100KHz-7GHz) LPA-6-30 11140711 02/10/2016 1 Year 02/10/2017 ETS-Lingren Loop Antenna 6512 00049120 08/20/2015 1 Year 08/20/2016 Bi-Log antenna (30MHz~2GHz) JB1 A030702 08/15/2015 1 Year 08/15/2016 Horn Antenna (1-26.5GHz) 3115 10SL0059 08/25/2015 1 Year 08/25/2016 Tuned Dipole Antenna 30 - 1000 MHz (4pcs set) AD-100 40133 10/02/2015 1 Year 10/02/2016 3 Meters SAC 3M N/A 08/08/2015 1 Year 08/08/2016 10 Meters SAC 10M N/A 09/05/2015 1 Year 09/05/2016 RF Conducted Measurement Spectrum Analyzer N9010A 10SL0219 10/27/2015 1 Year 10/27/2016 R & S Receiver ESIB 40 100179 06/03/2015 1 Year 06/03/2016 Test Equity Environment Chamber 1007H 61201 07/28/2015 1 Year 07/28/2016 USB RF Power Sensor 7002-006 10SL0190 09/22/2015 1 Year 09/22/2016 Note: Equipment is allowed to have a 3 month extension past the calibration due date. Test Software Version Test Item Vendor Software Version Radiated Emission EMISoft EMISoft Vasona V5.0 Conducted Emission EMISoft EMISoft Vasona V5.0 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 32 of 33 Annex B. SIEMIC Accreditation Accreditations Document Scope / Remark ISO 17025 (A2LA) Please see the documents for the detailed scope ISO Guide 65 (A2LA) Please see the documents for the detailed scope TCB Designation A1, A2, A3, A4, B1, B2, B3, B4, C FCC DoC Accreditation FCC Declaration of Conformity Accreditation FCC Site Registration 3 meter site FCC Site Registration 10 meter site IC Site Registration 3 meter site IC Site Registration 10 meter site Radio & Telecommunications Terminal Equipment: EN45001 – EN ISO/IEC 17025 EU NB Electromagnetic Compatibility: EN45001 – EN ISO/IEC 17025 Singapore iDA Phase I, Phase II CB(Certification Body) Vietnam MIC Please see the document for the detailed scope CAB Accreditation (Phase II) OFCA Foreign Certification Body for Radio and Telecom Hong Kong OFCA (Phase I) Conformity Assessment Body for Radio and Telecom Radio: Scope A – All Radio Standard Specification in Category I Industry Canada CAB Telecom: CS-03 Part I, II, V, VI, VII, VIII 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL16041201-HID-019 Page 33 of 33 Radio: A1. Terminal equipment for purpose of calling Japan Recognized Certification Telecom: B1. Specified radio equipment specified in Article 38-2, Paragraph 1, Item Body Designation 1 of the Radio Law EMI: KCC Notice 2008-39, RRL Notice 2008-3: CA Procedures for EMI KN22: Test Method for EMI EMS: KCC Notice 2008-38, RRL Notice 2008-4: CA Procedures for EMS KN24, KN61000-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11: Test Method for EMS Korea CAB Accreditation Radio: RRL Notice 2008-26, RRL Notice 2008-2, RRL Notice 2008-10, RRL Notice 2007-49, RRL Notice 2007-20, RRL Notice 2007-21, RRL Notice 2007- 80, RRL Notice 2004-68 Telecom: President Notice 20664, RRL Notice 2007-30, RRL Notice 2008-7 with attachments 1, 3, 5, 6; President Notice 20664, RRL Notice 2008-7 with attachment 4 LP0002, PSTN01, ADSL01, ID0002, IS6100, CNS14336, PLMN07, PLMN01, Taiwan NCC CAB Recognition PLMN08 Taiwan BSMI CAB Recognition CNS 13438 R-3083: Radiation 3 meter site Japan VCCI C-3421: Main Ports Conducted Interference Measurement T-1597: Telecommunication Ports Conducted Interference Measurements EMC: AS/NZS CISPR 11, AS/NZS CISPR 14.1, AS/NZS CISPR22, AS/NZS 61000.6.3, AS/NZS 61000.6.4 Radio communications: AS/NZS 4281, AS/NZS 4268, AS/NZS 4280.1, AS/NZS 4280.2, AS/NZS 4295, AS/NZS 4582, AS/NZS 4583, AS/NZS 4769.1, Australia CAB Recognition AS/NZS 4769.2, AS/NZS 4770, AS/NZS 4771 Telecommunications: AS/ACIF S002:05, AS/ACIF S003:06, AS/ACIF S004:06 AS/ACIF S006:01, AS/ACIF S016:01, AS/ACIF S031:01, AS/ACIF S038:01, AS/ACIF S040:01, AS/ACIF S041:05, AS/ACIF S043.2:06, AS/ACIF S60950.1 AS/ACIF S002, AS/ACIF S003, AS/ACIF S004, AS/ACIF S006, AS/ACIF Australia NATA Recognition S016,AS/ACIF S031, AS/ACIF S038, AS/ACIF S040, AS/ACIF S041, AS/ACIF S043.2 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:


Document Created: 2017-12-09 09:59:08
Document Modified: 2017-12-09 09:59:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC