Installation Guide

FCC ID: JQ6-5127MODMIN

Users Manual

Download: PDF
FCCID_4105004

Drivers and Manuals: www.hidglobal.com/omnikey Americas and Corporate Asia Pacific 611 Center Ridge Drive 19/F 625 King’s Road Austin, TX 78753 North Point, Island East USA Hong Kong OMNIKEY® Smart Card Readers Europe, Middle East and Africa Installation Guide Phoenix Road PLT-02395, Rev A.3 Haverhill, Suffolk CB9 7AE eBase Models England 1021, 3021, 3121, 5021, 5022, 5023, www.hidglobal.com/support 5025, 5027, 5127, 5421, 5422, 5427, 6121 Introduction Specifications and Installation This guide describes physical behaviour and conformities of For further information, contact HID support: OMNIKEY Smart Card Readers. www.hidglobal.com/support 1021 USB - Desktop smart card reader in a small form factor for For driver setup, consult the OMNIKEY Smart Card User Guide. desktop and mobile usage. CAUTION: Install the drivers prior to attaching the OMNIKEY 3021 USB - High-performance smart card reader, with a USB reader with the computer. interface and small form factor for desktop and mobile usage. ATTENTON: Vous devez installer le driver avant de connecter le 3121 USB - High-performance smart card reader for desktop use lecteur OMNIKEY à l’ordinateur. with multiple standing base options in a robust housing. 5021 USB - Contactless Reader with USB interface for desktop USB Connected Reader Specifications use that reads/writes to 13.56 MHz smart cards. Operating 32°F to 131°F (0°C to 55°C) 5022 USB - Contactless Reader with USB CCID-compliant Temperature interface for desktop use that reads/writes to 13.56 MHz smart 59.1 in (150 cm) cards. 1021, 3021, 3121, 5021, 5022, 5023, 5025 CL, 5027, 5422, 5427 G2 5023 USB - A 5022 Reader with iCLASS and Seos support. PC Connector Cable 5027 USB - A 5023 Reader with Keyboard wedge. 78.7 in (200 cm) 5421, 5427 CK 5025 CL USB - Contactless Reader with USB CCID-compliant interface for desktop use that reads contactless (125 kHz) Prox Mean Time Between 500,000 Hours cards. Failures (MTBF) 5127 / 5427 CK/ 5427 UE USB - Contactless 13.56MHz/125kHz Host Interface USB 2.0 CCID (USB 1.1 Compatible) reader with CCID/Keyboard wedge interface. 5427 G2 - Contactless 13.56MHz/125kHz reader with CCID/ Host Data 12 Mbps (USB 2.0 Full Speed) Keyboard wedge interface and BLE. Transmission Speed 5421 / 5422 USB - Dual interface PC-linked reader that reads/ writes to 13.56 MHz contactless cards and virtually any contact Power Supply Bus Powered smart card. 5422 includes CCID. 6121 Mobile USB - Dongle-sized smart card reader for SIM-sized USB Connected Reader Installation smart cards, especially well suited for use with mobile devices. 1. Connect the reader with computer; plug the USB connector Parts into your computer’s USB port. ƒƒ Smart Card Reader 2. When the reader is operational, the LED illuminates. ƒƒ Installation Guide 3. For contactless operation, hold the card next to the reader Find drivers, reader documentation supporting various logo. For contact smart cards, insert the card into the reader operating systems at: with contacts facing up. www.hidglobal.com/omnikey 4. The LED blinks when the reader is exchanging data with a See the application note for card loading and handling card (reading/writing). instructions at: www.hidglobal.com/omnikey © 2010-2017 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior written permission of HID Global Corporation. HID Global, HID, the HID Brick Logo, ICLASS SE, OMNIKEY, and SEOS are the trademarks or registered trademarks of HID Global Corporation, or its licensors, in the U.S. and other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners.

Regulatory CE Marking (All Readers) HID Global hereby declares that these proximity readers are in compliance with the CAUTION: Any changes or modifications to this device not explicitly approved by essential requirements and other relevant provisions of Directive 2006/95/EC. manufacturer could void your authority to operate this equipment. Por el presente, HID Global declara que estos lectores de proximidad cumplen ATTENTION: Tout changement ou modification de cet appareil sans approbation con los requisitos esenciales y otras disposiciones relevantes de la Directiva explicite du manufacturer vous enlève les droits d’usage de cet équipement. 2006/95/EC. FCC (All Readers) HID Global déclare par la présente que ces lecteurs à proximité sont conformes This device complies with part 15 of the FCC Rules. Operation is subject to the aux exigences essentielles et aux autres stipulations pertinentes de la Directive following two conditions: (1) This device may not cause harmful interference, and 2006/95/EC. (2) this device must accept any interference received, including interference that may cause undesired operation. A HID Global, por meio deste, declara que estes leitores de proximidade estão em conformidade com as exigências essenciais e outras condições da diretiva FCC (Readers 1021, 3021, 3121, 6121) 2006/95/EC. Tested to comply with FCC standards FOR HOME AND OFFICE USE HID Global bestätigt hiermit, dass die Leser die wesentlichen Anforderungen und Product Radio Certifications anderen relevanten Bestimmungen der Richtlinie 2006/95/EC erfüllen. The OMNIKEY 5022 CL and 5127CK MINI Module were tested under the FCC rules HID Global dichiara che i lettori di prossimità sono conformi ai requisiti essenziali and Industry Canada rules for a Modular Approval and therefore the following e ad altre misure rilevanti come previsto dalla Direttiva europea 2006/95/EC. shall apply: (reference below FCC/IC IDs) Download the R&TTE Declaration of Conformity (DoC) at: ƒƒ Provided that the Antenna and tuning network have not been http://www.hidglobal.com/certifications changed in any way, the Final Product label may contain the HIID Global FCC ID. Provided no other radio devices exist within the Brazil (Readers 5022, 5023, 5422 and 5427 G2) final assembly. The end integrator may use these ID’s, as long at the “Este equipamento opera em caráter original HID Global Label is visible. secundário, isto é, não tem direito a proteção ƒƒ FCC ID: JQ6-OK5022CL or IC ID: 2236B-OK5022CL contra interferência prejudicial, mesmo de ƒƒ FCC ID: JQ6-OK5127CKMINI or IC ID: 2236B-OK5127CKMINI estações do mesmo tipo, e não pode causar ƒƒ The End User/Manufacturer, will not need to repeat the intentional interferência a sistemas operando em caráter primário” emissions testing (actual radio certification), however the un- intentional emissions testing will need to meet the FCC and IC requirements with the module installed into the final assembly or Chile (Readers 5022, 5422 and 5427 G2) product. This also applies to CE Marking as defined by the R&TTE China (Readers 1021, 5022, 5422, 5427 and 5427 G2) Directive. ƒƒ However, in many cases, the module may need to be retuned, due Hong Kong (Readers 5022, 5023, 5422 and 5427 G2) to the effects of the product enclosure and assemblies within this India (Readers 5022, 5023, 5422 and 5427 G2) enclosure, and the de-tuning affect that this may have on the radio circuitry. In this case and if other radios exist, Class 2 Permissive Japan MIC (Reader 4121) Change is required. この装置は総務省の型式指定を受けています。 ƒƒ In the event that the HID OEM modules Kit is modified in any way, 本製品は電波を使用したRFID機器の読み取り・書き込み装置です。 the radio transmitter operating at either 125 kHz, 13.56 MHz and そのため使用する用途・場所によっては、医療機器に影響を与える恐れがあります。 Bluetooth, when the module is integrated into the OEM’s final product, Radio Certification is required for the final product. Korean KC (Readers 1021, 3121, 4040, 4321, 5021, 5022, ƒƒ Obtain FCC Certification by submitting the final product to a 5325, 5326, 5421, 5422, 5427, 5427 G2, 6121, 6221, 6321) Telecommunications Certified Body (TCB) laboratory that performs the testing and issue the FCC Grant. Standard: Part 15, Subpart C. ƒƒ Often the same TCB tests to Canada requirements and grants certification as a Certification Body (CB). Standard: RSS-210, RSS- 항목 규격 항목 규격 GEN and RSS-310, where applicable. ƒƒ The same laboratory may also be an EU Communications 송신주파수 RFID:13.56 MHz 전파형식 A1D Assessment Body (CAB) that is accredited to test to R&TTE Directive 수신주파수 RFID:13.56 MHz 발진방식 X-tal requirements for CE Marking. Applicable standards: 출력 RFID: 10m에서 24.19mv이하 변조방식 AM EN 300 330, EN 301 489-3, EN 50130-4, and IEC60950. ƒƒ A laboratory that is a CAB testing to R&TTE Directive requirements 전원 DC 5 will also be testing to Australia and New Zealand requirements Mexico (Readers 5022, 5023, 5422, 5427 G2) because of a common test standard. Standard: AS/NZS 4268. Singapore (Reader 5427 CK) ƒƒ Asian country certifications are obtained on an individual country basis. OEM Final Product US Dept. of Commerce Bureau of Industry and Security (BIS) approval is required for USA based companies who export and re-export products using encryption. Taiwan (Readers 5321 and 5421) Regulatory Compliance Assistance - HID Global provides technical assistance 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變 and laboratory recommendations, as required. 更頻率、加大功 CAUTION: Any changes or modifications to this devise not explicitly approved 率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾合 by the manufacturer could void your authority to operate this equipment. 法通信；經發現 有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指 Canada Radio Certification (All Readers) 依電信法規定作 This device complies with Industry Canada license-exempt RSS standard(s). 業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射 Operation is subject to the following two conditions: (1) This device may not 性電機設備之干 cause interference, and (2) this device must accept any interference, including 擾。 interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d’Industrie Canada applicable According to “Administrative Regulations on Low Power Radio Waves Radiated aux appareils radio exempts de licence. L’exploitation est autorisée aux deux Devices” Without permission granted by the NCC, any company, enterprise, conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) or user is not allowed to change frequency, enhance transmitting power or l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme alter original characteristic as well as performance to an approved low power si le brouillage est susceptible d’en compromettre le fonctionnement. radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. hi dg lo b a l .com An ASSA ABLOY Group brand


Document Created: 2017-12-13 09:55:57
Document Modified: 2017-12-13 09:55:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC