SAR Exclusion Report

FCC ID: JPZ0125

RF Exposure Info

Download: PDF
FCCID_4482329

BEC INCORPORATED SAR REPORT TEST STANDARDS: FCC Part 15 Subpart C Intentional Radiator KDB 447498 D01 Lutron Electronics Model KL01 Wireless Controlled LED Lamp FCC ID: JPZ0125 REPORT BEC-2008-03 CUSTOMER: Lutron Electronics Co Incorporated 7200 Suter Road Coopersburg, PA 18036 PREPARED BY: Paul Banker, Test Engineer REVIEWED and APPROVED BY: Steve Fanella, Quality Manager The results described in this report relate only to the item(s) tested. This document shall not be reproduced except in full without prior written permission of BEC Incorporated

TABLE OF CONTENTS Notice To Customer ...................................................................................................................... 3 Revision History ............................................................................................................................ 3 1.0 Administrative Information .............................................................................................. 4 1.1 General Information Table ............................................................................................... 4 2.0 SAR Test Exclusion Parameters and Justification ......................................................... 5 3.0 SAR Test Exclusion Calculation ....................................................................................... 6 Appendix A – Test Equipment..................................................................................................... 7 Report # BEC-2008-03 Lutron KL01 Wireless Controlled LED Lamp FCC SAR Report Release Date: 09/18/2019 Page 2 of 7

Notice To Customer This report and any recommendations it contains represent the result of BEC’s testing and assessment on behalf of your company. Testing has been conducted according to accepted engineering standards and practices. This report reflects testing and assessment of product samples provided by your company and may not reflect the characteristics of other samples, especially those produced at different times. Therefore this report and its findings and recommendations, if implemented, should not be construed as an assurance or implied warranty for the continuing electromagnetic compatibility (EMC) of the product. BEC shall not be liable for incidental or consequential damages, even if advised of the possibility thereof. BEC will not disseminate this report to other parties without your express permission. You may reproduce this report in its entirety including this notice and the entireties of any supplemental test reports on the same product (e.g. reports on additional testing following modification). However ‘you may not reproduce portions of the report (except for the entirety of the summary section) or quote from it for any purpose without specific prior written permission from BEC’. Revision History Revision # Description of Changes Date of Changes Date Released 0 Test Report Initial Release N/A 09/18/2019 Report # BEC-2008-03 Lutron KL01 Wireless Controlled LED Lamp FCC SAR Report Release Date: 09/18/2019 Page 3 of 7

1.0 Administrative Information 1.1 General Information Table Project Number BEC-2008 Manufacturer Lutron Electronics Company Incorporated Model Number KL01 Serial Number KLALV001_C01 Sample Number 2008-01 FCC ID JPZ0125 Radio Chip Manufacturer Silicon Labs Radio Chip Model Number EFR32MG12 Frequency of Operation 2.402 GHz – 2.480 GHz Wireless Technology Used BLE and IEEE 802.15.4 FCC Classification Digital Transmission System (DTS) Date Samples Received 08/14/2019 Condition Samples Received Suitable for test Sample Type Production unit Wireless Controlled LED Light Bulb Using BLE and EUT Description IEEE 802.15.4 Applicable FCC Rules 47 CFR Part 2.1093, KDB 447498 D01 Report # BEC-2008-03 Lutron KL01 Wireless Controlled LED Lamp FCC SAR Report Release Date: 09/18/2019 Page 4 of 7

2.0 SAR Test Exclusion Parameters and Justification From KDB 447498 D01: 4.3. General SAR test exclusion guidance 4.3.1. Standalone SAR test exclusion considerations The Maximum Antenna Power used for the RF Exposure Threshold calculation is the highest measured output power shown in the following table. The table comes from the FCC Part 15C test report for this product. The Lutron KL01 can operate as or a BLE radio or an IEEE 802.15.4 radio. The SAR Exclusion will be calculated for each of the two radios. The separation distance used in the calculation is 10 centimeters. This distance is derived from the usage of the product. The Wireless Controlled LED Lamp is normally installed in a light fixture. The proximity of the lamp to a human would likely never be as close as 10 cm. The conservative distance is chosen to ensure a comfortable margin to the SAR exemption limit. The following tables depict the total Effective Isotropic Radiated Power (EIRP), measured at the antenna. Low, middle and high frequencies were measured for both radios. BLE with 2FSK modulation Channel Measured Cable # Antenna Gain Total EIRP Frequency Modulation Level 813 Loss (GHz) (dBm) (dB) # dBi dBm Watts 37 2.402 18.08 0.36 2.20 20.64 0.116 18 BLE 2FSK 2.442 17.93 0.46 2.20 20.59 0.115 39 2.480 17.78 0.41 2.20 20.39 0.109 IEEE 802.15.4 with OQPSK modulation Channel Measured Cable # Antenna Gain Total EIRP Frequency Modulation Level 813 Loss (GHz) # (dBm) (dB) dBi dBm Watts 11 2.405 17.42 0.36 2.20 19.98 0.100 IEEE 802.15.4 18 2.440 17.19 0.45 2.20 19.84 0.096 OQPSK 26 2.480 17.06 0.41 2.20 19.67 0.093 Report # BEC-2008-03 Lutron KL01 Wireless Controlled LED Lamp FCC SAR Report Release Date: 09/18/2019 Page 5 of 7

3.0 SAR Test Exclusion Calculation The following calculation, from paragraph 4.3.1(b) of KDB 447498 D01, was used to determine the SAR Test Exclusion Threshold: {[Power allowed at numeric threshold for 50 mm in step a)] + [(test separation distance – 50 mm) x (f(MHz) / 150]} mW The power level used below is the output of the device at the antenna. The measurement distance is therefore 0 cm. The power level will drop as the distance increases. Therefore, compliance at 0 cm is worst case value. BLE IEEE 802.15.4 Results: The Lutron KL01, Wireless Controlled LED Lamp, complies with SAR Test Exclusion Thresholds shown in the tables. Therefore, SAR evaluation is not required. Report # BEC-2008-03 Lutron KL01 Wireless Controlled LED Lamp FCC SAR Report Release Date: 09/18/2019 Page 6 of 7

Appendix A – Test Equipment BEC Calibration Calibration Calibration Equipment Manufacturer Model # Serial # # Date Cycle Due Date EMI Receiver Rohde & (20 Hz – 26.5 ESIB 26 836119/006 1010 07/02/19 3 Years 07/02/22 Schwarz GHz) Intentional Radiator Testing Flexco FC102494 N/A 813 03/15/17 3 Years 03/15/20 High Frequency Microwave 90293A6B RF Test Cable Report # BEC-2008-03 Lutron KL01 Wireless Controlled LED Lamp FCC SAR Report Release Date: 09/18/2019 Page 7 of 7


Document Created: 2019-10-01 10:28:00
Document Modified: 2019-10-01 10:28:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC