User Manual

FCC ID: JPZ0121

Users Manual

Download: PDF
FCCID_4135773

English Customer Assistance LED indicator (behind button) For questions concerning the installation or operation of this Rotary Remote product, call Customer Assistance. Z3-1BRL Button toggles lights on/off Please provide exact model number when calling. 3 V- 10 mA CR2032 battery Outer ring rotates to dim lights U.S.A. and Canada: 1.844.LUTRON1 Works with compatible ZigbeeR LED bulbs Other countries: +1.610.282.3800 For the complete list of compatible bulbs go to up/down www.lutron.com/connectedbulbremote 0301869 Rev. A 12/2018 Required for Installation Mounting to the wall switch 1 Make sure switch is on 2 Install mounting clip 3 Attach knob to mounting clip Press mount to wallplate. B Securely fasten using a Philips Philips Rotary knob Rotary base head screwdriver screwdriver A (not included) Align opening with Connecting to a smart bulb toggle. Snap knob onto mount. Insert compatible Zigbee bulb and turn ON If Using a PhilipsR Hue Bridge Battery replacement Search “PhilipsR Hue” and 1 download the app 1 2 Loosen screw and open battery 3 Slide to remove/install door WARNING: Risk of fire, explosion, and burns. May result in serious injury or death. DO NOT recharge, + disassemble, crush, puncture, heat above 212 °F (100 °C) or incinerate 2 Follow screen prompts the battery. The battery in this device contains Perchlorate a Settings icon material, special handling may apply. For more information, visit www.dtsc.ca.gov/hazardouswaste/perchlorate Accessory setup b Configure sensors & switches This device complies with part 15 of the FCC Rules and Industry Canada Troubleshooting license-exempt RSS standard(s). Operation is subject to the following two conditions: c Add accessory (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may Not paired/Bulb is switched off Pairing cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user's authority to operate this If pairing directly to a ZigbeeR bulb 2x (2 slow blinks) (slowly fading in and out) equipment. (no bridge) Ce dispositif est conforme à la section 15 des règlements du FCC et des standards CNR exempt de licence d’Industrie Canada. L'opération est sous réserve des deux conditions suivantes : (1) Cet appareil ne peut causer d'interférence nuisible, et 6 sec Low battery Pairing successful (2) Cet appareil doit tolérer toute interférence, même celle pouvant affecter son 6 (Red LED blinks) (blinks rapidly) fonctionnement. Tout changement ou modification sans l'autorisation expresse de Lutron Electronics Co., Inc. pourrait annuler le droit d'utiliser cet équipement. 4 in (10 cm) lutron.com/fcc Hold for 6 seconds; bulb will flash Restoring Factory Defaults Tap button quickly 3x. On final tap, continue to hold button for 3 seconds. Quickly tap button 3x again. Lutron Electronics Co., Inc. 7200 Suter Road Lutron is a trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries. Google and the Google logo registered trademarks of Google Inc., used with Coopersburg, PA 18036-1299 USA permission. Apple and the Apple logo is registered trademarks of Apple Inc. App Store is a service mark of Apple Inc. Zigbee is a trademark of Zigbee Alliance. PHILIPS is a registered trademark of Koninklijke Philips N.V.


Document Created: 2019-01-02 14:09:34
Document Modified: 2019-01-02 14:09:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC