User Manual

FCC ID: JPZ0119

Users Manual

Download: PDF
FCCID_4096105

Wireless Installing your fan control Installation for ceiling fans with one wall switch (single pole) quick-start guide 1 Install the fan 4 Remove existing switch from wall 5 Remove side sections (if necessary) 6 Connect the fan control 8 Attach the wallplate CAUTION Use only with permanently installed ceiling fans. To avoid overheating and possible damage to other In-wall fan control Install the fan according to the manufacturer’s Remove the wallplate from switch. equipment, do not use to control receptacles, motor- Attach the adapter to the fan control using the instructions and ensure proper operation. 4 driven appliances, or transformer-supplied appliances. screws provided and snap on the wallplate. Welcome—and thank you for purchasing a Caséta Wireless in-wall fan control. In order to control your Codes 2 ceiling fan from an app or remote, you’ll need to replace 3 Tag Install in accordance with all national and local Set the fan speed and the lights 1 an existing switch with a Caséta Wireless in-wall fan electrical codes. control. 1 Set the fan to the highest speed using the pull chains. Bend back 2 Grounding Before you install the fan control, please read quick-start and forth. Ground When no “grounding means” exist in wallbox, the guide and watch the installation video at 2 1 National Electrical Code (NEC®) allows a control to www.casetawireless.com/support be installed as a replacement if 1) a nonmetallic, 1 Connect the bare copper (or green) “ground” wire noncombustible faceplate is used with nonmetallic We hope you enjoy the convenience of Caséta Wireless! from the wallbox to the green wire on the fan control Remove the switch and pull it away from the wall. Do not remove outside side sections attachment screws or 2) the circuit is protected by a Double your warranty 3 using a wire connector. 2 on the controls at the end of gang. ground fault circuit interrupter (GFCI). When installing Turn power off at circuit breaker! 3 a control according to these methods, cap or remove Love Caséta Wireless controls? Have ideas 2 Wrap line/hot wire around screw terminal. Tighten for making them better? Tell us what you think green wire before screwing control into wallbox. securely to 5 in-lb (0.55 N•m) ‘snap’ and we’ll extend your warranty by 1 year. 3 www.casetawireless.com/register FCC/IC Information 3 Connect the neutral wire from the wallbox to the This device complies with part 15 of the FCC Rules and Industry Canada white wire on the fan control using a wire connector. license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired OFF 4 Connect the load wire from the wallbox to the yellow operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user’s authority to operate this equipment. wire on the fan control using a wire connector. Note: This equipment has been tested and found to comply with the limits for 4 Contents supplied Each control Control at middle has all a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference Place tag on load wire. Disconnect all three in a residential installation. This equipment generates, uses and can radiate In-wall fan control WARNING: SHOCK HAZARD. has inside side side sections removed. radio frequency energy and, if not installed and used in accordance with wires* from the switch. the instructions, may cause harmful interference to radio communications. (PD-FSQN) May result in serious injury or death. Turn off sections removed. However, there is no guarantee that interference will not occur in a particular power at circuit breaker or fuse before installing. 5 installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or Important note: Tag (If you installed the control next to other dimmers, more of the following measures: 7 6 —Reorient or relocate the receiving antenna. Mount the fan control switches, or controls, you’ll need to install a wallplate —Increase the separation between the equipment and receiver. Some fans have one wall switch, while others with the correct size/number of openings to —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. have two or more wall switches. We’ve included accommodate all the devices) —Consult the dealer or an experienced radio/TV technician for help. instructions for fans with one wall switch (called a 9 Wire connectors (3) Screws (2) single pole). If your fan has more than one switch Ground (called a 3-way), please visit Use the screws provided. Turn power on at circuit breaker Warranty 7 www.casetawireless.com/3way for complete For warranty information, please visit installation instructions and how-to videos. www.casetawireless.com/warranty Tools you’ll need 1 Troubleshooting Flat-head screwdriver Pliers Tag Symptoms Probable cause and action Fan does not • Ensure Front Accessible ON turn ON and no Service Switch (FASS) is fully Phillips-head screwdriver Ground indicator lights pushed in to the ON position. 2 turn ON. • Ensure that the fan pull chain is * If your switch has more than 3 wires attached, see set to highest possible setting. “Installing Caséta Wireless in a 3-way switch application” • Neutral wire is not connected. video at www.casetawireless.com/3way Check wiring. P/N 0301907 REV A • Breaker is OFF or tripped (or fuse blown). Reset breaker or replace fuse. If condition Works with one paddle- type ceiling fan: Using your Caséta Wireless kit (sold separately) Using your controls persists, contact Lutron Customer Assistance or a licensed electrician. With a smartphone or tablet (Bridge required, sold separately) Without a smartphone or tablet (Bridge not required) • Load and Line wires possibly Fan—up to 1.5 A reversed, refer to wiring The Caséta Wireless fan control can be controlled from a smartphone when used with the Lutron Smart Bridge. Pairing the fan speed control Changing the favorite fan speed diagram in step 6. If you are using the fan control and remote control with the Lutron and Pico remote control setting on the Pico remote On Fan does not work. Fan direction switch is between forward and reverse. Set switch Smart Bridge follow the instructions below. control or fan control (sold 1 to desired position. Lutron  ress and hold “off” button on the fan P Faster Note: If you are using the fan control and remote control with another manufacturer’s bridge, please refer to that manufacturer’s control separately) Favorite Fan vibrates or • Fan direction switch is between Slower wobbles. forward and reverse. Set switch instructions for set-up. You can use the round “favorite” to desired position. Lutron Smart Bridge button on the Pico remote control Off Lutron app • Fan blades must be balanced. Hold for 6 seconds or fan control to recall a favorite Favorite FASS See fan manufacturers until LEDs start 1 fan speed setting. We’ve set it to Front Accessible installation guide to balance Download the Lutron app blinking Medium, but you can change it to Press and hold “off” button on dimmer Service Switch fan. IMPORTANT NOTES any speed you like. Fan speed is too Set fan pull chain speed to high. 1. Use  to control one paddle-type ceiling fan (permanent split-capacitor). 2. U  se the ceiling fan’s pull chain to set its speed to 3 Set desired fan speed setting on fan control In-wall fan control slow. Search for “Lutron Caseta” the highest setting. 3. D  o not use to control fans that use shaded-pole motors (i.e. bath exhaust fans). 4. D  o not use to control fans that have integrated fan speed controls (i.e. fans that have a remote control), unless the integrated control is removed www.casetawireless.com/LutronApp Lutron from the ceiling fan. 2 Apple is a trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. On 5. D  o not connect to any other motor-operated Press and hold “off” button Faster 2 appliance or to any lighting load type. Launch the hold Press and Lutron appbutton on remote “off” Favorite 6. D  o not use to control a fan lighting load (i.e. Slower light kit). 7. Do not use to control DC motor fans. Hold for 6 seconds Off until fan control LEDs 4 flash 3 times. The Lutron app will walk you through Press and hold “favorite” button on remote Pico remote control (sold separately) setting up your devices. x3 Lutron Hold the favorite button on either the remote or control for 6 seconds until LEDs Go to www.casetawireless.com/support for blink twice on in-wall fan additional troubleshooting suggestions. Repeat steps to pair other control. New favorite level is now saved. Important notes: Pico remote controls. 1. For indoor use only. x2 2. Operate between 32 ˚F (0 ˚C) and 104 ˚F (40 ˚C). 3 Press Use theand holdapp Lutron “off” to button on ALL complete remoteremaining steps )Lutron Lutron, Caséta and Pico are trademarks of Lutron Electronics Device Ratings Co., Inc., registered in the U.S. and other countries. FASS and Add devices Control Schedule Connect In-wall fan control Smart Bridge are trademarks of Lutron Electronics Co., Inc. NEC is a registered trademark of the National Fire Protection Association, Quincy, • Pico remotes three ways your lights, while away PD-FSQN Massachusetts. Google and the Google logo are registered trademarks of • Dimmers fans, or loads 120 V~ 50/60 Hz Google Inc., used with permission. Lutron Electronics Co., Inc. • Shades 7200 Suter Road For advanced features, tips for using Caséta Wireless products, the complete Caséta Wireless product line, and more, 1.5 A © 2018 Lutron Electronics Co., Inc Coopersburg, PA 18036-1299, U.S.A. • Switches please visit www.casetawireless.com/features P/N 0301907 REV A • Fan controls


Document Created: 2018-10-29 11:40:57
Document Modified: 2018-10-29 11:40:57
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC