User Manual

FCC ID: JPZ0111

Users Manual

Download: PDF
FCCID_2579584

Wireless Installing your dimmer Installation for lights with one wall switch (single pole) quick-start guide 1 Turn power off at circuit breaker! 2 Remove existing switch from wall 3 Remove side sections (if necessary) 4 Connect the dimmer 6 Attach the wallplate CAUTION Use only with permanently installed fixtures with dimmable LED, dimmable CFL, halogen, or Optional incandescent,lamps. To avoid overheating and In-wall dimmer Remove the wallplate from switch. Attach the adapter to the dimmer using the possible damage to other equipment, do not use screws provided and snap on the wallplate. Welcome—and thank you for purchasing a CasétaTM 4 to control receptacles, motor-driven appliances, Wireless in-wall dimmer. In order to control your lights or transformer-supplied appliances. from an app or remote, you’ll need to replace an existing 1 3 OFF switch with a CasétaT Wireless in-wall dimmer. Codes 2 1 Install in accordance with all national and local Before you install the dimmer, please watch the Bend back electrical codes. installation video at and forth. 1 www.casetawireless.com/support Warning: Shock Hazard 2 Ground Grounding May result in serious injury or death. Turn off When no “grounding means” exist in wallbox, the We hope you enjoy the convenience of CasétaTM Wireless! power at circuit breaker or fuse before installing. National Electrical Code (NEC®) allows a control to Double your warranty Remove the switch and pull it away from the wall. Do not remove outside side sections 1 Connect the bare copper (or green) “ground” wire be installed as a replacement if 1) a nonmetallic, on dimmers at the end of gang. 2 noncombustible faceplate is used with nonmetallic Love CasétaTM Wireless dimmers? Have ideas from the wallbox to the green wire on the dimmer for making them better? Tell us what you think using a wire connector. 3 attachment screws or 2) the circuit is protected by a and we’ll extend your warranty by 1 year. ground fault circuit interrupter (GFCI). When installing ‘snap’ a control according to these methods, cap or remove www.casetawireless.com/register 3 2 Connect either of the remaining wires from the wallbox to either of the remaining wires on the green wire before screwing control into wallbox. dimmer using a second wire connector. FCC/IC Information This device complies with part 15 of the FCC Rules and Industry Canada 3 Connect the remaining wire from the wall to license-exempt RSS standard(s). Operation is subject to the following two the remaining wire on the dimmer using a third conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired 4 wire connector. Contents supplied Each dimmer Dimmer at middle has all operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for In-wall dimmer Disconnect all three wires* from the switch. has inside side side sections removed. 4 If available, connect the white neutral wire. a Class B digital device, pursuant to part 15 of the FCC Rules. These limits Required for: MLV loads, LED drivers, PHPM-PA, are designed to provide reasonable protection against harmful interference (PD-10NXD) sections removed. in a residential installation. This equipment generates, uses and can radiate 5 PHPM-3F, GRX-TVI. radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Important Note: 3-Way Important note: (If you installed the dimmer next to other dimmers However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 5 6 television reception, which can be determined by turning the equipment off Mount the dimmer or switches, you’ll need to install a wallplate with the Removing side sections reduces the dimmer’s and on, the user is encouraged to try to correct the interference by one or If you have more than one switch controlling the correct size/number of openings to accommodate all more of the following measures: maximum wattage rating. See the chart below —Reorient or relocate the receiving antenna. light, this is called a 3-way installation. You will need for maximum wattage information. the devices.) —Increase the separation between the equipment and receiver. to buy PJ2-WALL-WH-L01. —Connect the equipment into an outlet on a circuit different from that to which 7 the receiver is connected. Wire connectors Screws Ground Maximum* wattage derating chart —Consult the dealer or an experienced radio/TV technician for help. (120 V~ 50/60 Hz) Use the screws provided. Turn power on at circuit breaker Switch 1 Switch 2 7 Side sections None 1 side 2 sides x5 x2 removed LED & CFL 250 W 250 W 250 W Warranty Tools you’ll need or * 1 For warranty information, please visit Flat-head screwdriver Pliers Incandescent, www.casetawireless.com/warranty 1000 W 800 W 600 W Halogen, & MLV ON Phillips-head screwdriver Ground 2 * If your switch has more than 3 wires attached, see * For maximum wattage information when Please visit www.casetawireless.com/3way for mixing light bulb types see “Installing Caséta Wireless in a 3-way switch application” more details. www.casetawireless.com/ganging video at www.casetawireless.com/3way P/N 0301778 REV A Works with energy efficient Using your CasétaT Wireless kit Using your controls Troubleshooting (sold separately) dimmable light bulbs: Symptoms Probable cause and action With a smartphone or tablet (Bridge required, sold separately) Without a smartphone or tablet (Bridge not required) Light does not turn on or in-wall • Light bulb(s) burned out. • Breaker is OFF or tripped. LED—up to 250 W dimmer LEDs do The CasétaT Wireless dimmer can be controlled from a smartphone when used with the LutronR Smart BridgeT. Pairing the dimmer and Changing the favorite light level not light up. • Light not properly installed. • Wiring error. CFL—up to 250 W If you are using the dimmer and remote control with the LutronR Pico® remote control on the Pico® remote control On • FASSTM switch on the dimmer is Smart BridgeT follow the instructions below. (sold separately) 1 Lutron in the Off position. Note: If you are using the dimmer and remote control with Press and hold “off” button on dimmer Brighter (with raised icon) Light does not • The dimmer failed to pair with Incandescent / Halogen—up to 1000 W another manufacturer’s bridge, please refer to that manufacturer’s Darker respond to Pico® Pico® remote control; see instructions for set-up. You can use the round “favorite” remote control. Pairing the dimmer and Pico® LutronR Smart BridgeT button on the Pico® remote Off remote control. LutronR app Hold for 6 seconds control to recall a favorite light Favorite • The dimmer is already at the MLV—up to 1000 W FASS™ until LEDs start 1 level. We’ve set it to 50%, but you Front Accessible light level the Pico® remote Download the Lutron® app blinking can change it to any level you like. Press and hold “off” button on dimmer Service Switch control is sending. NOTE: You can mix and match dimmable LED and • The Pico® remote control 3 CFLs, as well as halogen and incandescent light is outside the 30 ft (9 m) bulbs, with CasétaTM Wireless dimmers. Set desired light level on dimmer In-wall dimmer operating range. Dimmable LED and CFL light bulbs vary in their Search for “Lutron Caseta” • The Pico® remote control dimming performance. If you’re using these battery is low. bulbs and they flicker or turn off, please visit • The Pico® remote control www.casetawireless.com/lowend for information battery is installed incorrectly. on adjusting the dimmer for best bulb performance. Replacing light bulbs using FASSTM For a complete list of compatible dimmable LEDs www.casetawireless.com/LutronApp Lutron Pull the FASSTM switch out on the in-wall dimmer to remove power at the light socket. • Bulbs turn off while being Verify bulbs are marked dimmable and visit and CFLs, please visit 2 Apple is a trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. dimmed. www.casetawireless.com/ www.casetawireless.com/bulblist Press and hold “off” button on remote lowend for information on • Bulbs turn on 2 Compatible light bulbs include: On at high light adjusting the dimmer for best Launch the hold Press and Lutron ® app “off” button on remote Cree® level but do not bulb performance. BA19-08027OMF-12DE26-1U100 Brighter Favorite turn on at a low CR6-575L Hold for 6 seconds Darker light level. EcoSmart® until lights flash 3 times. • Bulbs flicker ECS BR30 W27 FL 120 ECS 20 WW FL 50WE 120 Feit® Lutron The Lutron® app will walk you through setting up your devices. x3 4 Press and hold “favorite” button on remote Off or flash when dimmed to a low light level. A19/OM/LED Pico® remote control (sold separately) Philips® Go to www.casetawirless.com/support for 9290002295 Hold for 6 seconds until LEDs additional troubleshooting suggestions. Sylvania® Repeat steps to pair other blink twice on in-wall dimmer. New favorite level is now saved. Important notes: LED12A19/DIM/O/827 LED21PAR38/DIM/P/930/FL30 Pico® remote controls. 1. For indoor use only. x2 2. Operate between 32 ˚F (0 ˚C) and 104 ˚F (40 ˚C). 3 Press Use theand hold® app Lutron “off”tobutton all remaining steps on remote complete Device Ratings Lutron, , and Pico are registered trademarks and FASS, Caséta, and In-wall dimmer Smart Bridge are trademarks of Lutron Electronics Co., Inc. NEC is a Add devices Control Schedule Connect PD-6WCL registered trademark of the National Fire Protection Association, Quincy, • PicoR remotes three ways your lights while away Massachusetts. Google and the Google logo are registered trademarks of 120 V~ 50/60 Hz Google Inc., used with permission. Lutron Electronics Co., Inc. • Dimmers 7200 Suter Road For advanced features, tips for using CasétaTM Wireless dimmers with CFLs and LEDs, the complete CasétaTM Wireless © 2015 Lutron Electronics Co., Inc Coopersburg, PA 18036-1299, U.S.A. • Shades product line, and more, please visit www.casetawireless.com/features P/N 0301778 REV A


Document Created: 2015-04-06 08:06:07
Document Modified: 2015-04-06 08:06:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC