Test Report 2

FCC ID: JOYKYY24

Test Report

Download: PDF
FCCID_2314904

FCC TEST REPORT (15.209) REPORT NO. : RF140502C06-6 R1 MODEL NO. : KYY24 FCC ID : JOYKYY24 RECEIVED : May 02, 2014 TESTED : May 29, 2014 ISSUED : Jun. 27, 2014 APPLICANT : Kyocera Corporation c/o Kyocera Communications, Inc. ADDRESS : 9520 Towne Centre Drive, Suite 200 San Diego, CA 92121 ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION : No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 17 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF140502C06-6 R1 1 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

Table of Contents RELEASE CONTROL RECORD ........................................................................................................... 3 1. CERTIFICATION....................................................................................................................... 4 2. SUMMARY OF TEST RESULTS .............................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY ........................................................................................... 5 3. GENERAL INFORMATION ....................................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT ......................................................................................... 6 3.2 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 6 3.3 DESCRIPTION OF SUPPORT UNITS ..................................................................................... 7 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ...................................................................... 7 4. TEST TYPES AND RESULTS .................................................................................................. 8 4.1 RADIATED EMISSION MEASUREMENT ................................................................................ 8 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ............................................................. 8 4.1.2 TEST INSTRUMENTS.............................................................................................................. 9 4.1.3 TEST PROCEDURES ............................................................................................................ 10 4.1.4 DEVIATION FROM TEST STANDARD .................................................................................. 10 4.1.5 TEST SETUP .......................................................................................................................... 11 4.1.6 EUT OPERATING CONDITIONS ........................................................................................... 11 4.1.7 TEST RESULTS ..................................................................................................................... 12 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................................ 15 6. INFORMATION ON THE TESTING LABORATORIES ........................................................... 16 7. APPENDIX A - Modifications recorders for engineering changes to the eut BY THE LAB .... 17 Report No.: RF140502C06-6 R1 2 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF140502C06-6 Original release Jun. 12, 2014 RF140502C06-6 R1 Revise Battery model name Jun. 27, 2014 Report No.: RF140502C06-6 R1 3 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

1. CERTIFICATION PRODUCT: Mobile Phone MODEL NO.: KYY24 BRAND: TORQUE G01 APPLICANT: Kyocera Corporation c/o Kyocera Communications, Inc. TESTED: May 29, 2014 TEST SAMPLE: Identical Prototype STANDARDS: FCC Part 15, Subpart C (Section 15.209) ANSI C63.4-2003 The above equipment (model: KYY24) have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Jun. 27, 2014 Vera Huang / Specialist APPROVED BY : , DATE : Jun. 27, 2014 Sam Chen / Senior Project Engineer Report No.: RF140502C06-6 R1 4 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD TEST TYPE RESULT REMARK PARAGRAPH Meet the requirement of limit. 15.209 Radiated Emission Test PASS Minimum passing margin is -5.41dB at 39.99MHz. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENT FREQUENCY UNCERTAINTY 30MHz ~ 200MHz 3.34 dB Radiated emissions 200MHz ~1000MHz 3.35 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Report No.: RF140502C06-6 R1 5 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT Mobile Phone MODEL NO. KYY24 rowensurrur DATA CABLE |Snceoysorren Refer to note as below V/O PORT Refer to user‘s manual ACCESSORY DEVICES Refer to note as below NOTE: 1. This is a test report for wireless charger. 2. The EUT has following accessories. ITEM BRAND MODEL SPECIFICATION Battery KYOCERA SAAXBTO81JAA— [3.8Vde, 3000mAh Earphone HOSIDEN HDHO261 1.5m cable 3. The above EUT information is declared by the manufacturer and for more detailed features description, please refer to the manufacturer‘s specifications or User‘s Manual. 3.2 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (Section 15.209) ANSI €63.4—2003 All test items have been performed and recorded as per the above standards. Report No.: RF140502006—6 R1 6 Report Format Version 4.0.0 Cancels and replaces the report No.: RF1405020C06—6 dated Jun. 12, 2014.

3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 Adapter KDDI(MITSUMI) 0301PQA N/A N/A NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 N/A NOTE: 1. All power cords of the above support units are non shielded (1.8m). 2. Item 1 was provided by client. 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST EUT (Power from AC Adapter) Earphone *Test Table Report No.: RF140502C06-6 R1 7 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

4. TEST TYPES AND RESULTS 4.1 RADIATED EMISSION MEASUREMENT 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT Radiated emissions which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section 15.209(a). Other emissions shall be at least 20dB below the highest level of the desired power. Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any Emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF140502C06-6 R1 8 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

4.1.2 TEST INSTRUMENTS DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESCI 100412 Sep. 13, 2013 Sep. 12, 2014 ROHDE & SCHWARZ Spectrum Analyzer FSU43 101261 Dec. 21, 2013 Dec. 20, 2014 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-472 Feb. 27. 2014 Feb. 26, 2015 SCHWARZBECK HORN Antenna BBHA 9120 D 9120D- 209 Sep. 12, 2013 Sep. 11, 2014 SCHWARZBECK HORN Antenna BBHA 9170 9170-480 Dec. 18, 2013 Dec. 17, 2014 SCHWARZBECK Loop Antenna HFH2-Z2 100070 Mar. 06, 2014 Mar. 05, 2016 Preamplifier EMC 012645 980115 Dec. 26, 2013 Dec. 25, 2014 EMCI Preamplifier EMC 184045 980116 Jan. 13, 2014 Jan. 12, 2015 EMCI Preamplifier EMC 330H 980112 Dec. 27, 2013 Dec. 26, 2014 EMCI RF signal cable 309219/4 SUCOFLEX 104 Oct. 18, 2013 Oct. 17, 2014 HUBER+SUHNNER 2950114 RF signal cable SUCOFLEX 104 250130/4 Oct. 18, 2013 Oct. 17, 2014 HUBER+SUHNNER RF signal cable RG-213 NA Nov. 07, 2013 Nov. 06, 2014 Worken Software E3 NA NA NA BV ADT 6.120103 Antenna Tower MFA-440H NA NA NA MF Turn Table MFT-201SS NA NA NA MF Antenna Tower &Turn Table Controller MF-7802 NA NA NA MF NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The calibration interval of the loop antenna is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in HwaYa Chamber 10. 4. The FCC Site Registration No. is 690701. 5. The IC Site Registration No. is IC 7450F-10. Report No.: RF140502C06-6 R1 9 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

4.1.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Peak detection (PK) and Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 1 MHz for Peak detection at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz for Average detection (AV) at frequency above 1GHz. 4.1.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF140502C06-6 R1 10 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

4.1.5 TEST SETUP Frequency range 9k~30MHz: 3m Frequency range 30~1000MHz: For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT OPERATING CONDITIONS Set the EUT under charging condition. Report No.: RF140502C06-6 R1 11 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

4.1.7 TEST RESULTS RADIATED WORST-CASE DATA: EUT TEST CONDITION MEASUREMENT DETAIL INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE 0.009~30MHz ENVIRONMENTAL DETECTOR Quasi-Peak 25deg. C, 65%RH CONDITIONS FUNCTION Average (AV) TESTED BY Peter Weng ANTENNA POLARITY & TEST DISTANCE: LOOP ANTENNA OPEN AT 3m EMISSION READ ANTENNA ANTENNA TABLE FREQ. LIMIT MARGIN LEVEL LEVEL FACTOR HEIGHT ANGLE REMARK (MHz) (dBuV/m) (dB) (dBuV/m) (dBuV) (dB/m) (cm) (Degree) 0.112 78.8 58.97 106.62 -27.82 19.83 100 0 Average 0.336 55.2 35.45 97.08 -41.88 19.75 100 0 Average 0.56 47.95 28.21 72.64 -24.69 19.74 100 0 QP 0.784 42.18 22.43 69.72 -27.54 19.75 100 0 QP 1.008 40.13 20.38 67.54 -27.41 19.75 100 0 QP 1.232 36.66 16.9 65.79 -29.13 19.76 100 0 QP REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. Above limits have been translated by the formula Report No.: RF140502C06-6 R1 12 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

EUT TEST CONDITION MEASUREMENT DETAIL INPUT POWER 120Vac, 60 Hz FREQUENCY RANGE 0.009~30MHz ENVIRONMENTAL DETECTOR Quasi-Peak 25deg. C, 65%RH CONDITIONS FUNCTION Average (AV) TESTED BY Peter Weng ANTENNA POLARITY & TEST DISTANCE: LOOP ANTENNA CLOSE AT 3m EMISSION READ ANTENNA ANTENNA TABLE FREQ. LIMIT MARGIN LEVEL LEVEL FACTOR HEIGHT ANGLE REMARK (MHz) (dBuV/m) (dB) (dBuV/m) (dBuV) (dB/m) (cm) (Degree) 0.112 74.19 54.36 106.62 -32.43 19.83 100 360 Average 0.336 51.23 31.48 97.08 -45.85 19.75 100 360 Average 0.56 44.1 24.36 72.64 -28.54 19.74 100 360 QP 0.784 39.76 20.01 69.72 -29.96 19.75 100 360 QP 1.008 38.36 18.61 67.54 -29.18 19.75 100 360 QP 1.232 37.28 17.52 65.79 -28.51 19.76 100 360 QP REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. Above limits have been translated by the formula Report No.: RF140502C06-6 R1 13 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

BELOW 1GHz WORST—CASE DATA : EUT TEST CONDITION MEASUREMENT DETAIL FREQUENCY RANGE |Below 1000MHz INPUT POWER 120Vac, 60 Hz ENVIRONMENTAL DETECTOR Peak (PK) conpitions 25deg. C, 65%RH FUNCTION Quasi—Peak (QP) TESTED BY Peter Weng ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M ragg. EMISSION READ |jy paggiy [ANTENNA casLe PpreAmpP |antennal Taste e LEVEL LEVEL (ypouyigy (ge) FACTOR LOS$ Factor Heleht aneLe remaRk (dBuV/im) (dBuy) (dB/m) (dB) (dB) (cm) |(Degree) 42.69 28.46 40.26 40 16.54 13.58 0.7 31.08 166 308 Peak 140.16 2819 a6i6 435 415.31 12.37 1.3 31.64 100 257 Peak 204.42 30.58 s1.09 435 12.92 9.56 162 si.69 100 135 Peak 538.7 22.55 33.17 46 2345 18.19 2.91 31.72 im s8 Peak 610.1 23.98 33.21 46 —22.02 19.73 s1z 32.08 100 192 Peak 703.2 2515 32.63 46 2085 20.86 a44 31.78 100 218 Peak ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M ragg. EMISSION READ |jy paggiy [ANTENNA casLe PpreAmpP |antennal Taste lane LevEL LEVEL (jpouyigy (ge) FAGTOR LOss Factor Helert anete remank (dBuV/im) (dBuy) (dB/m) (dB) (dB) (cm) |(Degree) 39.99 34.59 51.39 40 —5.41 13.54 oés |_30.99 100 122 Peak 111.27 24.94 4547 435 —18.56 10.18 114 si.s5 185 236 Peak 204.69 24.75 asze 435 418.75 9.56 162 si.69 100 155 Peak 547.1 2246 33.01 46 —23.54 18.39 294 3188 122 196 Peak 575.1 2311 33.16 46 —22.89 19.03 3.02 321 108 189 Peak 6521 24.8 33.33 46 —21.2 20.23 aes |_a2.01 100 185 Peak REMARKS: 1. Emission Level = Read Level + Antenna Factor + Cable Loss — Preamp Factor Margin Value = Emission Level — Limit Value Report No.: RF140502006—6 R1 14 Report Format Version 4.0.0 Cancels and replaces the report No.: RF1405020C06—6 dated Jun. 12, 2014.

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF140502C06-6 R1 15 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. Copies of accreditation and authorization certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5.phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Email: service.adt@tw.bureauveritas.com Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: RF140502C06-6 R1 16 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.

7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. ---END--- Report No.: RF140502C06-6 R1 17 Report Format Version 4.0.0 Cancels and replaces the report No.: RF140502C06-6 dated Jun. 12, 2014.


Document Created: 2018-08-01 20:10:03
Document Modified: 2018-08-01 20:10:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC