Test Report DFS

FCC ID: JOYJA32

Test Report

Download: PDF
FCCID_4145841

FCC PART 15.407(H) DYNAMIC FREQUENCY SELECTION TEST REPORT For KYOCERA Corporation Yokohama Office 2-1-1 Kagahara,Tsuzuki-ku Yokohama-shi,Kanagawa,Japan Model Number: JA32 Report Type: Product Type: Original Report Smart Phone Report Number: RDG181026006-00E Report Date: 2018-11-16 Jerry Zhang Reviewed By: EMC Manager Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”.

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 TEST FACILITY .............................................................................................................................................................3 SYSTEM TEST CONFIGURATION ..........................................................................................................................4 DESCRIPTION OF TEST CONFIGURATION ......................................................................................................................4 EUT EXERCISE SOFTWARE ..........................................................................................................................................4 EQUIPMENT MODIFICATIONS .......................................................................................................................................4 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................................4 SUPPORT CABLE LIST AND DETAILS ............................................................................................................................4 SUMMARY OF TEST RESULTS ...............................................................................................................................5 APPLICABLE STANDARDS........................................................................................................................................6 DFS REQUIREMENT .....................................................................................................................................................6 DFS MEASUREMENT SYSTEM ....................................................................................................................................10 SYSTEM BLOCK DIAGRAM .........................................................................................................................................10 4.5 RADIATED METHOD .............................................................................................................................................12 4.6 TEST PROCEDURE .................................................................................................................................................12 TEST RESULTS ..........................................................................................................................................................13 DESCRIPTION OF EUT ................................................................................................................................................13 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................13 TEST ENVIRONMENTAL CONDITIONS .........................................................................................................................13 RADAR WAVEFORM CALIBRATION ............................................................................................................................14 CHANNEL MOVE TIME AND CHANNEL CLOSING TRANSMISSION TIME .............................................16 TEST PROCEDURE ......................................................................................................................................................16 TEST RESULTS ...........................................................................................................................................................16 NON-OCCUPANCY PERIOD ...................................................................................................................................21 TEST PROCEDURE ......................................................................................................................................................21 TEST RESULT .............................................................................................................................................................21 DFS Test Report Page 2 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E GENERAL INFORMATION Product Description for Equipment under Test (EUT) EUT Name: Smart Phone EUT Model: JA32 Grant: JOY FCC ID: JOYJA32 Hardware Version: JA32 SW version: Sdm660_64-userdebug 9 Serial Number: JA32125479850089K0867 EUT Received Date: 2018.10.26 Objective This report is prepared on behalf of KYOCERA Corporation in accordance with FCC CFR47 §15.407 (h). Test Methodology FCC CFR 47 Part2, Part15.407 (h) KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02 905462 D03 Client Without DFS New Rules v01r02 Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Dongguan) to collect test data is located on the No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China. The test site has been approved by the FCC under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 897218,the FCC Designation No. : CN1220. The test site has been registered with ISED Canada under ISED Canada Registration Number 3062D. DFS Test Report Page 3 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E SYSTEM TEST CONFIGURATION Description of Test Configuration The EUT was configured for testing in an engineering mode which was provided by the manufacturer. EUT Exercise Software No exercise software was used. Equipment Modifications No modification was made to the EUT. Support Equipment List and Details Manufacturer Description Model Serial Number HUAWEI GPON Terminal HG8245Q2 2102311RGB6RH1000087 Lenovo Notebook E450 PF-0MRADG 16/08 Support Cable List and Details Cable Shielding Ferrite Length From Port To Description Type Core (m) RJ45 Cable No No 10 RJ45 Port of Notebook GPON Terminal DFS Test Report Page 4 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E SUMMARY OF TEST RESULTS The following result table represents the list of measurements required under the CFR47 §47 Part15.407 (h) and FCC KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02 . Items Description of Test Result Detection UNII Detection Bandwidth Not applicable Bandwidth Initial Channel Availability Check Time (CAC) Not applicable Performance Requirements Radar Burst at the Beginning of the CAC Not applicable Check Radar Burst at the End of the CAC Not applicable Channel Move Time Compliance In-Service Channel Closing Transmission Time Compliance Monitoring Non-Occupancy Period Compliance Radar Detection Statistical Performance Check Not applicable Note: 1) Not applicable: the EUT is a client unit without radar detection. DFS Test Report Page 5 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E APPLICABLE STANDARDS DFS Requirement FCC KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02 DFS Test Report Page 6 of 22

2oo o t t t et t t t on n Table 3: DFS Detection Thresholds for Master Devices and Clhent Devices With Radar Detection Maximum Transmit Power Value (See Notes 1, 2, and 3) EIRP > 200 milliwatt —64 dBm EIRP < 200 millirwatt and —62 dBm power spectral density =< 10 dBm/MHz EIRP < 200 milliwatt that do not meet the power spectral —64 dBm density requirement Note 1: This is the level at the imput of the recerver assuming a 0 dBi receive antenna. Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the test transnussion waveforms to account for vanations in measurement equipment. This will ensure that the test signal is at or above the detection threshold level to trigger a DFS response. Note3: EIRP is based on the highest antenna gain. For MIMO devices refer to KDB Publication 662911 DQ01. Table 4: DFS Response Requirement Values Parameter Value Non—occupancy period Minimum 30 minutes Channel Availability Check Time 60 seconds Channel Move Time 10 seconds See Note 1. Channel Closing Transmission Time 200 milliseconds + an aggregate of 60 milliseconds over remaming 10 second period. See Notes 1 and 2. L—NII Detection Bandwidth Minimum 100% of the U— N 99% transmission power bandwidth. See Note 3. Note 1: Channel Move Time and the Channel Closing Transmission Time should be performed with Radar Type 0. The measurement timing begins at the end of the Radar Type 0 burst. Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Chanxnel Move Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remamder of the 10 second period. The aggregate duration of control signals will not count quiet periods in between transmissions. Note 3: During the U—NZII Detection Bandwidth detection test, radar type O should be used. For each frequencystep the minimum percentage of detection is 90 percent. Measurements are | performed with no data traffic.

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E DFS Test Report Page 8 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E DFS Test Report Page 9 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E DFS Measurement System BACL DFS measurement system consists of two subsystems: (1) The radar signal generating subsystem and (2) the traffic monitoring subsystem. System Block Diagram DFS Test Report Page 10 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E Conducted Method Setup for Master with injection at the Master Setup for Client with injection at the Master DFS Test Report Page 11 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E Setup for Client with injection at the Client 4.5 Radiated Method 4.6 Test Procedure A spectrum analyzer is used as a monitor verifies that the EUT status including Channel Closing Transmission Time and Channel Move Time, and does not transmit on a Channel during the Non- Occupancy Period after the diction and Channel move. It is also used to monitor EUT transmissions during the Channel Availability Check Time. DFS Test Report Page 12 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E TEST RESULTS Description of EUT The EUT operates in 5250-5350 MHz and 5470-5725 MHz range. The calibrated radiated DFS detection threshold level is set to -64 dBm. WLAN traffic is generated by streaming the video file TestFile.mpg, this file is used by IP and Frame based systems for loading the test channel during the In-service compliance testing of the U-NII device. The file is streamed from the Access Point to the Client in full motion video mode using the media player with the V2.61 Codec package. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date NI PXI-1042 8-Slot National Instruments PXI-1042 VOBX40FBD N/A N/A chassis Arbitrary Waveform National Instruments PXI-5421 N/A N/A N/A Generator National Instruments RF Upconverter PXI-5610 N/A N/A N/A ASCOR Upconverter AS-7202 N/A N/A N/A Agilent Spectrum Analyzer E4440A SG43360054 2018-01-04 2019-01-04 Ditorn Splitter/Combiner D3C4080 SN2244 N/A N/A TDK RF Horn Antenna HRN-0118 130 084 2016-01-05 2019-01-04 ETS LINDGREN Horn Antenna 3115 000 527 35 2016-01-05 2019-01-04 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Environmental Conditions Temperature: 27.9℃ Relative Humidity: 41 % ATM Pressure: 101.1kPa The testing was performed by Swim Lv on 2018-11-10. DFS Test Report Page 13 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E Radar Waveform Calibration Radiated Calibration Setup Block Diagram Note: the calibration distance(D) was 3meter. Plots of Radar Waveforms DFS Test Report Page 14 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E 5290 MHz: Radar Type 0 5530 MHz: Radar Type 0 DFS Test Report Page 15 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E CHANNEL MOVE TIME AND CHANNEL CLOSING TRANSMISSION TIME Test Procedure Channel Move Time and the Channel Closing Transmission Time should be performed with Radar Type 0. The measurement timing begins at the end of the Radar Type 0 burst. repeat using a long pulse radar type5 waveform. The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of control signals will not count quiet periods in between transmissions. The aggregate channel closing transmission time is calculated as follows: Aggregate Transmission Time = N*Dwell Time N is the number of spectrum analyzer bins showing a device transmission Dwell Time is the dwell time per bin (i.e. Dwell Time = S/B, S is the sweep time and B is the number of bin, i.e. 8192) Test Results Frequency Bandwidth Radar Type Results (MHz) (MHz) 5290 80 Type 0 Pass 5530 80 Type 0 Pass Please refer to the following tables and plots. DFS Test Report Page 16 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E 5290 MHz Type 0 radar channel move time result: DFS Test Report Page 17 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E Type 0 radar channel closing transmission time result: Aggregate Transmission Time after Limit 200ms (ms) (ms) 21.97 60 5290 MHz channel closing transmission time Note: If Aggregate Transmission Time after 200ms is 0ms, the total on time after delay(s) item will not display any data. DFS Test Report Page 18 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E 5530 MHz Type 0 radar channel move time result: DFS Test Report Page 19 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E Type 0 radar channel closing transmission time result: Aggregate Transmission Time after Limit 200ms (ms) (ms) 7.324 60 5530 MHz channel closing transmission time Note: If Aggregate Transmission Time after 200ms is 0ms, the total on time after delay(s) item will not display any data. DFS Test Report Page 20 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E NON-OCCUPANCY PERIOD Test Procedure Measure the EUT for more than 30 minutes following the channel close/move time to very that the EUT does not resume any transmissions on this channel. Provide one plot to demonstrate no transmission on the channel for the non-occupancy period (30 minutes observation time) Test Result Frequency Bandwidth Spectrum Analyzer Display Test Result (MHz) (MHz) 5290 80 No transmission within 30 minutes Pass 5530 80 No transmission within 30 minutes Pass Please refer to the following plots. DFS Test Report Page 21 of 22

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG181026006-00E 5290 MHz 5530 MHz ***** END OF REPORT ***** DFS Test Report Page 22 of 22


Document Created: 2019-01-14 17:29:16
Document Modified: 2019-01-14 17:29:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC