Part 24 Test Report

FCC ID: JOYIUD19AB

Test Report

Download: PDF
FCCID_706026

Test report No. : 26KE0199-HO-C Page : 1 of 31 Issued date : August 30, 2006 FCC ID : JOYIUD19AB EMI TEST REPORT Test Report No. : 26KE0199-HO-C Applicant : KYOCERA Corporation Type of Equipment : iBurst User Terminal Model No. : UTD1900D-US-B Test standard : FCC Part 24 2005 FCC ID : JOYIUD19AB Test Result : Complied 1. This test report shall not be reproduced in full or partial, without the written approval of UL Apex Co., Ltd. 2. The results in this report apply only to the sample tested. 3. This equipment is in compliance with the above regulation. We hereby certify that the data contain a true representation of the EMC profile. 4. The test results in this report are traceable to the national or international standards. Date of test: August 5 to 18, 2006 ______________________________ Tested by: ______________________________ Kenichi Adachi EMC Services Approved by : ______________________________ Naoki Sakamoto Group Leader of EMC Services This laboratory is accredited by the NVLAP LAB CODE 200572-0, U.S.A. The tests reported herein have been performed in accordance with its terms of accreditation. *As for the range of Accreditation in NVLAP, you may NVLAP LAB CODE: 200572-0 refer to the WEB address, http://ulapex.jp/emc/nvlap.htm UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-C Page : 2 of 31 Issued date : August 30, 2006 FCC ID : JOYIUD19AB CONTENTS PAGE SECTION 1: Client information................................................................................................ 3 SECTION 2: Equipment under test (E.U.T.) ........................................................................... 3 SECTION 3: Test specification, procedures & results ............................................................ 4 SECTION 4: Operation of E.U.T. during testing..................................................................... 6 SECTION 5: Peak Output Power and Spurious Radiation and Band-Edge......................... 7 SECTION 6: Bandwidth and Band-Edge (Conducted)........................................................... 8 SECTION 7: Spurious Emission (Conducted) ......................................................................... 8 SECTION 8: Frequency Stability.............................................................................................. 8 APPENDIX 1: Photographs of test setup.................................................................................. 9 Spurious Radiation ......................................................................................................9 Worst Case Position (Horizontal: EUT-Y-axis, Ant-90deg. / Vertical:EUT-X-axis, Ant- 90deg.) .........................................................................................................................10 Frequency Stability....................................................................................................11 APPENDIX 2: Data of EMI test .............................................................................................. 12 Peak Output Power (Conducted) .............................................................................12 Peak Output Power (Radiated) ................................................................................14 Emission Bandwidth and 99%Occupied Bandwidth .............................................15 Band Edge(Conducted) .............................................................................................17 Band Edge (Radiated) ...............................................................................................22 Spurious Emission (Conducted) ...............................................................................23 Spurious Radiation ....................................................................................................27 Frequency Stability(Temperature/Voltage Variation)...........................................30 APPENDIX 3: Test instruments ............................................................................................... 31 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-C Page : 3 of 31 Issued date : August 30, 2006 FCC ID : JOYIUD19AB SECTION 1: Client information Company Name : KYOCERA Corporation Address : Yokohama Office 2-1-1 Kagahara, Tsuzuki-ku, Yokohama-shi, Kanagawa 224-8502, Japan Telephone Number : +81-45-943-6189 Facsimile Number : +81-45-943-6123 Contact Person : Toshihiko Kawata SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : iBurst User Terminal Model No. : UTD1900D-US-B Serial No. : 01 Rating : AC 120V / 60Hz (AC Adapter), 8.55-9.45V(EUT) Country of Manufacture : JAPAN Receipt Date of Sample : July 28, 2006 Condition of EUT : Production model Modification of EUT : No modification by the test lab. 2.2 Product Description Model No.: UTD1900D-US-B (referred to as the EUT in this report) is iBurst User Terminal. Equipment Type : Transceiver Frequency operation : 1900-1910MHz Type of modulation : BPSK,QPSK,8PSK,12QAM,16QAM Bandwidth : 500kHz Channel spacing : 625kHz Channel number : 16 Antenna Type : integrated mono-pole antenna Antenna connector Type : MMCX Antenna Gain : 4dBi Other Clock Frequency : 72MHz, 25MHz, 24MHz, 20MHz, 18MHz, 6MHz, 3MHz, 32.768kHz Temperature of operation : 0 deg. C. to + 40 deg. C. UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-C Page : 4 of 31 Issued date : August 30, 2006 FCC ID : JOYIUD19AB SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part 24 2005 Title : FCC 47CFR Part 24 Personal Communications Services 3.2 Procedures and results Item Test Method FCC Regulations Remarks Deviation Worst margin Results Peak Output Section 2.1046 Section 24.232(b) Conducted/ N/A 2.0dB Complied Power Radiated 1904.6875MHz, Horizontal Emission Section 2.1049 Section 24.238(b) Conducted N/A - Complied Bandwidth, 99% Occupied Bandwidth Band-Edge Section 2.1049 Section 24.238(b) Conducted/ N/A 0.79dB Complied Radiated 1900MHz QPSK+ Spurious Section 2.1051 Section 24.238(a) Conducted N/A - Complied Emission Spurious Section 2.1053 Section 24.238(a) Radiated N/A 8.9dB Complied Radiation 13302.188MHz, Horizontal Frequency Section 2.1055(a) (1) Section 24.235 Conducted N/A - Complied Stability and (b) (Temperature Variation) Frequency Section 2.1055(d)(1) Section 24.235 Conducted N/A - Complied Stability and (2) (Voltage Variation) Note: UL Apex’s EMI Work Procedures No. QPM05 *These tests were also referred to TIA-603-B “ Land Mobile FM or PM Communications Equipment Measurement and Performance Standards.” *These tests were performed without any deviations from test procedure except for additions or exclusions. UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-C Page : 5 of 31 Issued date : August 30, 2006 FCC ID : JOYIUD19AB 3.3 Confirmation UL Apex Co., Ltd. hereby confirms that E.U.T., in the configuration tested, complies with the specifications Part 24: 2005. 3.4 Uncertainty Antenna terminal measurements The measurement uncertainty (with a 95% confidence level) for this test is ±3.0dB The data listed in this report meets the limits unless the uncertainty is taken into consideration. Radiated emissions The measurement uncertainty (with a 95% confidence level) for this test is ±4.62dB(30-1000MHz) and ±5.06dB(Above 1GHz). The data listed in this report meets the limits unless the uncertainty is taken into consideration. 3.5 Test Location UL Apex Co., Ltd. Head Office EMC Lab. *NVLAP Lab. code: 200572-0 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 FCC IC Registration Width x Depth x Size of Other Registration Number Height (m) reference ground plane (m) / rooms Number horizontal conducting plane No.1 semi-anechoic 313583 IC4247A 19.2 x 11.2 x 7.7m 7.0 x 6.0m Preparation chamber room No.2 semi-anechoic 655103 IC4247A-2 7.5 x 5.8 x 5.2m 4.0 x 4.0m - chamber No.3 semi-anechoic 148738 IC4247A-3 12.0 x 8.5 x 5.9m 6.8 x 5.75m chamber No.3 shielded room - - 4.0 x 6.0 x 2.7m N/A - No.4 semi-anechoic 134570 IC4247A-4 12.0 x 8.5 x 5.9m 6.8 x 5.75m - chamber No.4 shielded room - - 4.0 x 6.0 x 2.7m N/A - No.5 shielded room - - 6.0 x 6.0 x 3.9m N/A - No.6 shielded - - 4.0 x 4.5 x 2.7m N/A - room No.6 measurement - - 4.75 x 5.4 x 3.0m N/A - room No.7 shielded room - - 4.7 x 7.5 x 2.7m 4.7 x 7.5m - No.8 measurement - - 3.1 x 5.0 x 2.7m N/A - room * Size of vertical conducting plane (for Conducted Emission test) : 2.0 x 2.0m for No.1, No.2, No.3 and No.4 semi-anechoic chambers and No.7 shielded room. 3.6 Test set up, Test instruments and Data of EMI Refer to APPENDIX 1 to 3. UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-C Page : 6 of 31 Issued date : August 30, 2006 FCC ID : JOYIUD19AB SECTION 4: Operation of E.U.T. during testing 4.1 Operating Modes The EUT was operated in a manner similar to typical use during the tests. The mode is used : Transmitting mode Low Channel :1900.3125MHz (Ch0) Mid Channel :1904.6875MHz (Ch7) High Channel :1909.6875MHz (Ch15) Justification: The system was configured in typical fashion (as a customer would normally use it) for testing. 4.2 Configuration and peripherals Not used for Radiated 3 B emission test. A:EUT 1 4 C D 2 5 AC120V / 60Hz Standard Ferrite Core for B. AC120V / 60Hz * Cabling and setup were taken into consideration and test data was taken under worst case conditions. Description of EUT and Support equipment No. Item Model number Serial number Manufacturer Remarks A iBurst User Terminal UTD1900D-US-B 01 KYOCERA EUT B PC TYPE2662-LBJ FX-FL781 IBM - AC Adapter for PC AA21131 11S02K6657Z1Z IBM - C 0ZA0651RX D AC Adapter TYPEFW7400/09 2106B FWHK - List of cables used No. Name Length (m) Shield Remarks Cable Connector 1 DC Cable 1.8 Unshielded Unshielded - 2 AC Cable 1.0 Unshielded Unshielded - 3 USB Cable 2.0 Shielded Shielded - 4 DC Cable 2.0 Unshielded Unshielded - 5 AC Cable 2.0 Unshielded Unshielded - UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-C Page : 7 of 31 Issued date : August 30, 2006 FCC ID : JOYIUD19AB SECTION 5: Peak Output Power and Spurious Radiation and Band-Edge [Conducted] Test Procedure The peak output power (conducted) was measured with a spectrum analyzer and an attenuator at the antenna port. Test data : APPENDIX 3 Test result : Pass [Radiated] Test Procedure 1) EUT was placed on a urethane platform of nominal size, 1.0m by 0.5m, raised 80cm above the conducting ground plane. Test was made with the antenna positioned in both the horizontal and vertical planes of polarization. The Radiated Electric Field Strength intensity has been measured in a semi anechoic chamber with a ground plane and at a distance of 3m. The measuring antenna height was varied between 1 to 4m and EUT was rotated a full revolution in order to obtain the maximum value of the electric field intensity. 2) Exchanged the EUT to the Substitution Antenna, the measurement was set for the same height 0.8m as the EUT. The frequency below 1GHz of the Substitution Antenna was used as the Half wave dipole Antenna, which is harmonized with the measured frequency in 1). The frequency above 1GHz of the Substitution Antenna was used with Horn Antenna. The Substitution Antenna was connected with the Signal Generator, and the polarized electromagnetic radiation of the Substitution Antenna was matched with the one of the measuring Antenna, which was set with the Signal Generator to the measured frequency in 1). Then, we set with the Output power (CW) of the Signal Generator where the measuring electromagnetic field is equal to the measured value in 1). The measuring antenna height varied between 1 and 4m to obtain the maximum receiving level. Its Output power of Signal Generator was recorded. 3) Equivalent isotropic radiated power was calculated by subtracting the cable loss and the attenuator loss connected between the Signal Generator and the Substitution Antenna from the Output power of the Signal Generator recorded in 2). Test data : APPENDIX 3 Test result : Pass - The carrier level and noise levels were confirmed at each position of X and Y axes of EUT and 90 and 180 deg. of EUT’s antenna to see the position of maximum noise, and the test was made at the position that has the maximum noise. UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)

Test report No. : 26KE0199-HO-C Page : 8 of 31 Issued date : August 30, 2006 FCC ID : JOYIUD19AB SECTION 6: Bandwidth and Band-Edge (Conducted) Test Procedure The Emission Bandwidth, 99% Occupied Bandwidth and Band-Edge was measured with a spectrum analyzer and attenuator connected to the antenna port. Test data : APPENDIX 3 Test result : Pass SECTION 7: Spurious Emission (Conducted) Test Procedure The Spurious Emission was measured with a spectrum analyzer and attenuator connected to the antenna port. Test data : APPENDIX 3 Test result : Pass SECTION 8: Frequency Stability Test Procedure The Frequency Stability was measured with a Vector Signal Analyzer (89441A (HP)) connected to the antenna port. The Frequency Drift was measured with the 10 deg. C. steps from –30 deg.C. to 50 deg.C., and it is presented as the ppm unit. The Frequency Drift was measured with the normal temperature(20 deg.C.) and Voltage tolerance (0 %, +15%, -15%), and it is presented as the ppm unit. Test data : APPENDIX 3 Test result : Pass UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06)


Document Created: 2006-08-31 09:58:42
Document Modified: 2006-08-31 09:58:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC