SAR Exclusion Report.pdf

FCC ID: JNZS00163

RF Exposure Info

Download: PDF
FCCID_3254821

RF Exposure Report Report No.: SA161202E09 FCC ID: JNZS00163 Test Model: S-00163 Received Date: Dec. 02, 2016 Test Date: Dec. 14, 2016 Issued Date: Dec. 22, 2016 Applicant: LOGITECH FAR EAST LTD. Address: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA161202E09 Page No. 1 / 7 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Evaluation Result .................................................................................................................................. 5 3 SAR Test Exclusion Thresholds .......................................................................................................... 6 4 Conclusion ............................................................................................................................................ 7 Report No.: SA161202E09 Page No. 2 / 7 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued SA161202E09 Original release. Dec. 22, 2016 Report No.: SA161202E09 Page No. 3 / 7 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Wireless Bluetooth Speaker Brand: Ue Test Model: S-00163 Sample Status: ENGINEERING SAMPLE Applicant: LOGITECH FAR EAST LTD. Test Date: Dec. 14, 2016 Standards: FCC Part 2 (Section 2.1093) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Dec. 22, 2016 Wendy Wu / Specialist Approved by : , Date: Dec. 22, 2016 May Chen / Manager Report No.: SA161202E09 Page No. 4 / 7 Report Format Version: 6.1.1

2 Evaluation Result Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  .  .  The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA161202E09 Page No. 5 / 7 Report Format Version: 6.1.1

Eooert venitas 3 SAR Test Exclusion Thresholds BT—EDR Power Table Peak Power Avg. Power Channel Frequency (MHz) (mW) (dBm) (mW) (dBm) 0 2402 16.634 12.21 11.668 10.67 39 2440 12.618 11.01 7.998 9.03 78 2480 1219 10.86 7.638 8.83 For BT—EDR SAR Test Exclusion Thresholds . . SAR test 1—g extremity Max Avg. *Max Time Max Time . heats s Power Avg. Power Avg. Power excluspn l 1‘.331 Result (GHz) dEm dBm) (mw) calculation exclusion Cew ( value"""=" thresholds 2402 ~ 2.480 10.67 9.59 9.099 2.82039647 3 Pass NOTE: 1. Calculate SAR test exclusion thresholds from condition "1" formulas. 2. *Time Avg. Power=Avg. Power+Duty factor BT—EDR Duty Cycle of Test Signal Tx on Tx total Duty Factor Duty Cycle (ms) (ms) (dB) 2.929 3.758 —1.08 RBW\ 10 Wtz (MMvev morker 1 [TT) VBW 10 Miz 1177 dom Ret 31 cem an 30 as SW 10me 2785000 ms Orfent i1 a5 Dete 2(M) ans«5 2520000 ms bate 3 P1) ans«5 3750000 me inononm Corter 2400 OHtz t ns Report No.: SA161202E09 Page No. 6 / 7 Report Format Version: 6.1.1

Eooert venitas BT—LE Power Table Peak Power Avg. Power Channel Frequency (MHz) (mW) (dBm) (mW) (dBm) 0 2402 11.641 10.66 11.298 10.53 19 2440 3.281 5.16 3.076 4.88 39 2480 2.985 4.75 2.812 4.49 For BT—LE SAR Test Exclusion Thresholds C Max Avg. *Max Time Max Time SA? t 1—%;;{trtemtlty requency Power Avg. Power Avg. Power exciusion eS Result (GHz) (dBm) (dBm) (mw) calculation exclusion value"""=" thresholds 2402 ~ 2.480 10.53 6.69 4.667 144661944 3 Pass NOTE: 1. Calculate SAR test exclusion thresholds from condition "1" formulas. 2. *Time Avg. Power=Avg. Power+Duty factor BT—LE Duty Cycle of Test Signal Tx on Tx total Duty Factor Duty Cycle ({ms) ({ms) (dB) 0.258 0.625 —3.84 new 10 hiz mive vew norker 1 (T1] vern t mz 548 dn Ret 31 cem Ar 30 48 snt Sme 627 000000 us Offent i1 a5 bate 2(P1) aos«5 258 000000us bate 3 P1) ocscs s25 000000us sooounm Certer 248 Oftz st0us) inoramrne 4 Conclusion Since Source—base time average power is below SAR test exclusion power thresholds, the SAR evaluation is not required. ——— END ——— Report No.: SA161202E09 Page No. 7/ 7 Report Format Version: 6.1.1


Document Created: 2017-12-20 17:12:34
Document Modified: 2017-12-20 17:12:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC